茂基稀土胺化物与异氰酸正己酯的反应-{(MeC5H4)2Yb[OC(NPh2)N(n-hexyl)]}2的合成及表征

茂基稀土胺化物(MeCp)2YbNPh2(THF)与异氰酸正己酯(n-HexylNCO)按11摩尔比反应, 分离出产物{(MeC5H4)2Yb[OC(NPh2)N(n-hexyl)]}2. 产物经元素分析和核磁共振表征, 并测定了其晶体结构. 配合物属三斜晶系, R-3空间群, 晶胞参数为a=2.9533(11) nm, b=2.9533(11) nm, c=1.5873(6) nm, V=11.9896(80) nm3, Z=9, Dc=1.562 mg·m-3, μ=3.536 mm-1 (Mo Kα), F(000)=5670, R=0.034, Rw=0.064. 该化合物具有二个对称氧桥的双分子结构, 并存在着由氮原子向中心金属镱分子内配位而形成的三环骨架, 中心金属镱的配位数是九, 整个分子呈中心对称.     

Supramolecular assemblies from single-chain hydrocarbon fluorocarbon hybrid bolaamphiphiles

Three types of single-chain hydrocarbon fluorocarbon hybrid bolaamphiphiles were synthesized.They readily formed different kinds of organized supramolecular assemblies,including vesicles,tapes,and micellar fibers,in aqueous solution.The aggregates morphology was characterized by transmission electron microscopy (TEM) after negative staining.The superstructures of these aggregates seemed to be determined by the geometry and the head group's properties of the corresponding amphiphiles.     

碳酸盐前驱物制备Y2O3超细粉及透明陶瓷

以Y(NO3)3和NH4HCO3为原料,通过向Y(NO3)3溶液中滴加NH4HCO3的方式制备了化学组成为Y2(CO3)3·2H2O的先驱沉淀物。研究了先驱沉淀物煅烧过程中的物相变化。先驱沉淀物1100℃煅烧4h后得到了平均粒径为60nm的无团聚Y2O3超细粉体。所得粉体不添加任何添加剂,在1700℃下真空烧结4h得到了透明Y2O3陶瓷。     

The discovery of polymer‐clay hybrids

The first successful example of a polymer‐clay hybrid was nylon‐clay hybrid (NCH), which is a nano‐meter‐sized composite of nylon‐6 and 1‐nm‐thick exfoliated aluminosilicate layers of the clay mineral. NCH was found and developed at Toyota Central Research and Development Laboratories over 17 years ago. The NCH containing a few weight percentages of clay exhibits superior properties such as high modulus, high strength, and good gas‐barrier properties. The key for the discovery of NCH was the polymerization of a nylon monomer in the interlayer space of the clay. This highlight presents the development of NCH from its discovery to its commercialization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 819–824, 2004     

Composition and thermal stability of SiO2-based hybrid materials TEOS-MTEOS system

Hybrid materials with different amounts of organics permanently bound on the inorganic network obtained in the TEOS-MTEOS (tetraethoxysilan-methyltriethoxysilan) system are used for obtaining coatings with different optical and mechanical properties. To study the thermal stability of the mentioned materials, compositions with different molar ratios of the precursors were prepared. The influence of the solvent and water amounts on the gelation process was also investigated. The gels obtained were characterised by IR spectrometry and their decomposition temperatures were determined by DTA/TG. Thermal stability of the gels is rather influenced by their composition than the conditions of the gelation process. This revised version was published online in July 2006 with corrections to the Cover Date.     

壳寡糖与镧、铈配合物的合成、表征及应用

合成了壳寡糖，镧和壳寡糖，铈配合物，用红外光谱和紫外光谱进行了表征，并证实了氮，金属(N-M)键的形成，元素分析证实配合物中各元素C：H：N：La或Ce的原子个数比分别接近于24：44：4：1，即相当于配位数为4。壳寡糖一镧和壳寡糖一铈较未配位的镧或铈具有更强的催化氧化能力。配合物除去废液中磷[(PO)^3-4]的效果比未配位的镧和铈提高10％。配合物可提高蔬菜、水稻种子的发芽率，促进作物的营养生长，提高水稻产量3，3％，提高黄瓜产量12％～15％，对十字花科蔬菜的病毒有一定的抑制作用。     

Redox thermochemistry of SrFe1-xCoxO3-d

The enthalpy of oxidation of SrFe_1-xCo_xO_3-d with x=0.33 and 0.67 has been determined by adiabatic calorimetry; average values for x=0.33 and 0.67 are -67±11 and -49.5±9 kJ (mol O₂)^-1. These data and the previously reported value for SrFeO_3-d suggest that the enthalpy of oxidation for pure (perovskite-type) SrCoO_3-d is close to zero. Earlier reported composition - partial pressure data for SrFe_0.67Co_0.33O_3-d are reproduced when preferential oxidation of iron is assumed for low partial pressures of oxygen. This revised version was published online in August 2006 with corrections to the Cover Date.     

Immobilization of copper in organic-inorganic hybrid materials: a highly efficient and reusable catalyst for the Ullmann diaryl etherification

The immobilization of copper in organic-inorganic hybrid materials catalyzing the Ullmann reaction has been described. Phenols reacted with aryl iodides, aryl bromides and aryl chlorides smoothly in the presence of a 3-(2-aminoethylamino)propyl functionalized silica gel immobilized copper catalyst. The protocol involved the use of DMSO as the solvent, and potassium fluoride as the base. The reactions generated the corresponding cross-coupling products in good to excellent yields. Furthermore, the silica-supported copper could be recovered and recycled by a simple filtration of the reaction solution and used for 10 consecutive trials without loss of its reactivity.     

Dispersion of silica nano-particles in sol-gel hybrid resins for fabrication of multi-scale hybrid nanocomposite

Multi-scale hybrid nanocomposites containing both ∼15 nm silica colloids and ∼2 nm oligosiloxanes in a methacryl polymer matrix were newly designed and fabricated. Colloidal silica sols were dispersed in methacryl oligosiloxanes nano-hybrid resins synthesized by sol-gel reaction of methacryloxypropylmethoxysilane and diphenylsilanediol. On the basis of TEM and SANS analyses, it was confirmed that the silica colloids were compatibly dispersed and different sizes of colloidal silica and oligosiloxanes co-exist in the solutions. Multi-scale hybrid nanocomposites fabricated by UV and thermal curing with incorporation of silica colloids in the nano-hybrid materials show enhanced mechanical and thermal characteristics.     

Imide-siloxane block copolymer/silica hybrid membranes: preparation, characterization and gas separation properties

Imide-siloxane block copolymer/silica hybrid membranes with covalent bonds were prepared via sol–gel reaction. The structural informations of these hybrid membranes were obtained by using Fourier transform-infrared spectrometry (FT-IR), ²⁹Si nuclear magnetic resonance (²⁹Si NMR), XPS and thermogravimetric analysis (TGA). The gas separation properties of the hybrid membranes were also investigated in terms of organosiloxane (PDMS) or silica content at various temperatures. In the hybrids, the addition of PDMS phase increased the permeabilities of gases such as He, CO₂, O₂, and N₂, indicating that the gas transport occurred mainly through rubbery organic matrix. Meanwhile, the PDMS phase contributed the decreased gas selectivities to nitrogen but the reduction in selectivities was very small in comparison with other siloxane containing polymeric membranes. This might be due to the restriction of chain mobility by the existence of inorganic component such as silica network in the hybrids. Additionally, the increase of silica content in these hybrid membranes considerably retarded the falling-off of gas selectivity at elevated temperature. The increase of silica content in hybrid membranes resulted in well-formed silica networks and hence these inorganic components restricted the plasticization of organic matrix by the thermal segmental motion of organic components, leading to preventing the large decrease of the gas selectivity.