On the Nonlocal Electron Kinetics in s- and p-Striations of DC Glow Discharge Plasmas: I. Electron Establishment in Striation-like Fields

The nonlocal behavior of the electrons in strongly modulated and period-averaged electric fields typical of s- and p-striations in neon glow discharge plasmas is investigated by numerically solving the axially inhomogeneous electron Boltzmann equation. A good agreement between the period lengths measured in the striations and those obtained from the spatially periodic electron relaxation in the period-averaged field of the striations is found confirming the close relation of both phenomena. The s- and p-striations represent the fundamental and first harmonics of the inherent periodic electron relaxation. Furthermore, starting from different boundary conditions the establishment of the velocity distribution function and of selected macroscopic quantities of the electrons into unique periodic states under the action of strongly modulated striation-like fields is investigated. It is shown that the same damping processes that cause in homogeneous fields a relaxation into homogeneous states lead to unique periodic states in strongly modulated fields.     

Determination of methylated dibenzothiophenes in environmental sarnples by on-line HPLC-CGC

Concurrent solvent evaporation with a loop-type interface was used for on-line HPLC-CGC in the analysis of methylated dibenzothiophene (DBT) isomers in oil samples. The chromatographic behavior of 20 methyl DBT's was studied by HPLC on an aminopropylsilane DBTA phase and by GC on a selective methyl-phenylsilicone phase. That provided a method for analyzing by GC-flame photometric detection, the individual components of the DBT family, previously picked out of the crude oil matrix by HPLC. The GC oven temperature was shown to be critical during HPLC eluent introduction into the GC pre-column. Too high a temperature induced a severe broadening of early eluted peaks whereas a temperature too close to the boiling point of the liquid at the inlet pressure induced double peaks. Optimized conditions were retained on this basis and may be used for the analysis of other families of polyaromatic hydrocarbons.     

SIAmate-a compact and modular sequential injection analysis controller

A number of sequential injection analysis (SIA) measurement methods have been developed during the last years. Almost all have been used in laboratory conditions with good results, but very few have been implemented as on-line methods, applied to non-stop measurements, producing immediate results for process control. The transfer of an SIA system from laboratory to an industrial facility [J. Ruzicka, Anal. Chim. Acta 261 (1992) 3] requires a whole new range of details to be taken into account. Some SIA platform related topics will be discussed. There are numerous ways of building an SIA system that meets the needs of the industry. One alternative, SIAmate, is presented.     

流动注射—化学发光法测定苯甲醛

依据苯甲醛增强没食子酸－过氧化氢－氢氧化钠体系化学发光的性质，建立了苯甲醛的流动注射化学发光分析法。     

Erosion of efficiency in non-uniform linear chromatography

In linear chromatography (i.e. chromatography performed in the absence of sample overloading), when the plate height of a column is roughly uniform along its length, variations in the velocities of solutes are the only possible causes of erosion of efficiency. The sources of these variations (variations in capacity ratio and in the density of the mobile phase, etc.) play no direct role in the erosion of efficiency except through their effect on solute velocities. In other words, what eventually causes the erosion of efficiency is merely variation in the time required for solutes to traverse equally small segments of a column. Significant erosion can only arise from abrupt and deep deceleration of solutes in one or several relatively small segments of a column. If erosion of efficiency caused by pressure gradients in linear SFC is to be large, the depth and the sharpness of the deceleration of a solute must go beyond that hitherto confirmed experimentally. Many relevant examples are analyzed graphically.     

Some observations on the automation by flow injection analysis of the spectrophotometric determination of amino acids and proteins witho-phthalaldehyde

Automation by flow injection analysis with Spectrophotometric detection of the determination of total amino acids and proteins witho-phthalaldehyde is not straightforward. The use of spectrophotometry, instead of spectrofluorimetry, and of N-acetyl-L-cysteine, instead of the conventional mercaptoethanol is advantageous because of the lower variability of absorptivities with respect to fluorescence yields, and the larger stability of the derivatives. Under adequate working conditions and with leucine as reference, the procedure can be used for the evaluation of total amino acids. A similar procedure is proposed for the analysis of proteins in a sample. Limits of detection are 1 × 10^–5 M for amino acids, and 1 × 10^–6 M for proteins, respectively.     

Evaluation of a PTV injector for quantitative analysis of volatile compounds at low concentrations

The performance of a PTV injector operated in the solvent venting mode with Tenax in the glass insert was evaluated with synthetic mixtures containing 5 to 50 ng of n-alkanes, ethyl esters, n-alcohols, and carboxylic acids. The influence of the sampled amount, the injected volume, and the nature of the solvent on accuracy and precision were studied. Coefficients of variation of relative (normalized) peak areas and absolute peak area ratios of each compound to the standard are of the order of 5 %.     

Electrochemical response of ascorbic acid at conducting and electrogenerated polymer modified electrodes for electroanalytical applications: a review

The present short review deals with electroanalytical aspects of electrochemical response of ascorbic acid (Vitamin C) at conducting and electrogenerated polymer modified electrodes. Two main topics are considered: (i) electrocatalytic oxidation of ascorbate at conducting polymer modified electrodes, leading to electroanalytical techniques for ascorbate assay, and (ii) retardation of ascorbate penetration through a layer of electrogenerated polymers, leading to permselective coatings and their diverse uses, especially for biosensing devices.     

Quantitative determination of chloride by means of flow injection analysis with spectrophotometric detection in the UV/VIS range

Chloride is determined indirectly by Spectrophotometric flow injection analysis. Two systems are compared, both based on the principle of ion exchange of easily detectable anions versus chloride from suitable mercury salts. The first method is based on the exchange of chloride with chloranilate which is detected at 332 nm or at 306 nm in neutral or in acidic medium respectively. In the second case, chloride reacts with Hg(SCN)₂. The liberated thiocyanate forms a strongly coloured complex with Fe(III) in acidic solution with an absorption maximum at 460 nm. Both methods have a detection limit of about 5 mol Cl^–/l (175 ng/ml). In the case of the thiocyanate method, the relative standard deviation is about 2% (7 measurements) in the range of 5 to 150 mol/l and decreases significantly to a value of approximately 0.2% at higher concentrations; for the chloranilate method it is 10% for lower and about 1% for higher concentrations respectively.     

自加热非晶锗热电阻MEMS流速传感器的制造与测试

为扩大流速传感器的测量范围并降低功耗,制造并测试了一种基于自加热非晶锗薄膜热电阻的MEMS流速传感器,它是由嵌入氮化硅薄膜的四个非晶锗热敏电阻和一对环境测温补偿电阻组成。四个非晶锗热电阻同时作为自加热热源和测温元件,相互连接以形成惠斯通电桥。给出了MEMS工艺流程,微加工制造了尺寸为8.9 mm×5.6 mm×0.4 mm的流速传感器芯片。搭建了低流速和高流速气流通道实验装置,对传感器的惠斯通电桥施加50μA的恒定电流(CCA),实现了0～50 m/s范围内的流速测量。结果表明,传感器在低流速(0～2 m/s)时的灵敏度约为81.6 mV/(m/s),在高流速(2～50 m/s)时的灵敏度约为51.9 mV/(m/s),最大功耗仅约为1.03 mW。