A two-dimensional infrared correlation spectroscopic study on the thermal degradation of poly(2-hydroxyethyl acrylate)-co-methyl methacrylate/SiO2 nanohybrids

Two-dimensional infrared (2D IR) correlation spectroscopy was applied to study the structural changes occurring in the decomposition of PHEA-co-MMA/SiO₂. Complicated absorption spectral changes were observed in the heating process. 2D IR analysis indicates that during heating, covalent bonds, (Si-O-C), between the polymer and the inorganic moiety were formed, which was the main factor in the improvement in thermal properties of the hybrids such as the decomposition temperatures (T_d). The thermal stability of the hybrids was also studied by solid-state ²⁹Si MAS NMR spectroscopy and TGA tests. Their results complemented each other well.     

Determination of chloride ion in aqueous samples by isotope-dilution Fourier-transform flame infrared emission (ID-FIRE) spectrometry

An isotope dilution method for the determination of chloride ion in aqueous samples is described. The method makes use of the isotopic shift in the rotational lines of the 1–0 band of HCl emitted in the near infrared region of the spectrum by vibrationally excited HCl molecules present in a hydrogen/entrained air flame. Chloride ion in the sample is converted to chlorine gas by electrolysis and swept into a hydrogen/entrained air flame where it is converted into HCl. Because isotope dilution is an absolute method of analysis, matrix effects are minimized, and the chlorine generation step need not be quantitative. With the system described in this paper, samples must contain at least 9 mg of chloride ion per ml, and a 2-ml sample is required. Over the range from 10 to 30 mg Cl⁻ ml⁻¹, the average error was −0.96%, and the average relative standard deviation was 3.3% for seven samples using seven of the more intense lines in the P branch. Compared with standard silver nitrate titrations, the isotope dilution procedure was not affected by such common interferences as bromide ion and iodide ion. The technique was applied to several seawater samples from different regions.     

Thermogravimetric study of polyacrylamide with evolved gas analysis

Dried samples of polyacrylamide in an He atmosphere have been subjected to thermogravimetric analysis in the 30–600°C range, and the evolved gases were monitored by FTIR. Water, ammonia, and small quantities of carbon dioxide are released in the first stages of decomposition (220–340°C), where the polymer chains remain intact and the reaction occurs on the pendant amide groups. In the second stage of decomposition (340–440°C), the majority of the weight loss occurs, and main chain breakdown occurs, releasing carbon dioxide, water, nitrile compounds, and imides. Trapping of the gases in this stage and analysis by GC–FTIR and GC–MS reveals the presence of more than 20 decomposition products, and confirms that a large proportion of these can be assigned to glutarimide and its substituted analogs. Imidization and dehydration reactions on the amide groups, as well as free radical breakdown of the main chains, with inter- and intramolecular hydrogen transfer, can account for many of the products of the decomposition. © 1993 John Wiley & Sons, Inc.     

Incorporation of FT-IR spectral data in a computer-assisted prediction of globular protein structure

Currently, much effort is being directed to the determination of the three-dimensional structure of proteins. Two classes of research are of interest; spectrometric techniques which include Fourier transform infrared (FT-IR) spectrometry, and non-spectrometric prediction schemes. The spectra obtained using FT-IR spectrometry, are analyzed to determine the percentages of alpha-helices, beta-pleated sheets, and non-structured coils in a protein. Unfortunately, FT-IR, as well as other spectrometric techniques, cannot be used to determine the exact secondary structure of a protein reliably. Non-spectrometric prediction methods yield information on the exact secondary structure, but are not always accurate. Most prediction methods relate the primary amino acid sequence to the secondary structure of a protein, allowing sequential secondary structure information for the protein examined to be obtained. The goal of this research is to incorporate FT-IR with a prediction method, resulting in an improvement in the accuracy of the prediction.     

The synthesis of a precursor of polybenzimidazole (PBI) and blends with polyamic acid (PAA)

The precursor of polybenzimidazole (PBI), poly(3,3′-diamino-4,4′-benzidine isophthalamide) (PDABI), was synthesized from poly(3,3′-dinitro-4,4′-benzidine isophthalamide) (PDNBI) by reduction. With increasing temperature, the NH₂ moiety which was protected by SnCl₅^?1 could cyclize and form PBI. Blends with polyamic acid (LaRC-TPI) were prepared. Clear blend films were prepared at up to 400°C. The IR spectra displayed shifts in the NH stretching band, thereby providing evidence for specific interactions related to the miscibility of their cured blends. © 1993 John Wiley & Sons, Inc.     

红外光谱法观察二茂镧系氯化物与氧及水蒸气的反应

用实时红外光谱法在特制的收池中分别观察了一些二茂镧系氯化物Ｃｐ２ＬｎＣｌ（Ｃｐ＝Ｃ５Ｈ５，Ｌｎ＝Ｈｏ，Ｇｄ，Ｌｕ）和Ｃｐ＇Ｌｕ（Ｃｐ＝Ｃ５Ｈ４ＣＨ２ＯＣＨ３）与干燥氧气及水蒸气的反应，结果证实这些二茂镧系配合物在室温干燥氧气氛中很稳定，但在水蒸气中很快水蒸气的反应，结果证实这些二茂镧系配合物在室温干燥氧气氛中很稳定，但在水蒸气中很快水解。从水解反应的最初始阶段和较后期采得的红外光谱提示可能存在...     

咪喹莫特的波谱学数据与结构表征

对咪喹莫特的红外(IR)、紫外(UV)、质谱(MS)、氢-氢相关谱(^1H--^1H COSY)、碳氢相关谱(HMQC)、碳氢远程相关谱(HMBC)予以解析并进行了报道。对所有的^1H NMR、^13C NMR谱的信号进行了归属；讨论了质谱的主要碎片离子的可能的裂解方式和红外特征吸收峰所对应的官能团的振动形式。     

Progress on phthalocyanine-conjugated Ag and Au nanoparticles: Synthesis,characterization, and photo-physicochemical properties

Phthalocyanine (Pc) complexes are an important class of dyes with numerous (e.g., biological, photophysical, and analytical) applications. Among the methods used to improve the properties of these complexes, one should mention the introduction of different substituents, variation of the central metal ion, ligand exchange, and conjugation to nanomaterials (e.g., carbon-based nanomaterials and metal nanoparticles (NPs)). This work briefly reviews Pc complex conjugation to Ag and Au NPs, highlights the different NP shapes, and discusses the diversity of conjugation approaches. Moreover, the use of UV–Vis spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force microscopy, dynamic light scattering and Fourier transform infrared spectroscopy to characterize Pc-NP hybrids is summarized. The effect of conjugation on Pc photo-physicochemical properties (fluorescence, singlet oxygen generation, triplet state formation, and optical limiting behavior) is discussed, and future perspectives for the synthesis and applications of new hybrids are provided.     

Heat-resistant polymers from melt-processable bisimido-bisphthalonitriles

Heat-resistant polymers which are processable into void-free components and suitable for composite applications have been synthesized by thermal/chemical polymerization of four newly developed bisimido-bisphthalonitriles containing silicon, ether, carbonyl, and hexafluoroisopropylidene groups. Thermal polymerization involving addition reactions was performed at 200–275°C for 2–10 h and then post-curing at 310°C for 10 h. Polymers VI, VII, VIII , and IX were obtained. The thermal polymerization was monitored using infrared spectroscopy. Thermal polymerization was also carried out in the presence of an aromatic diamine. A polyhexasocyclane ( V ) was synthesized by condensation polymerization of ether containing bisimido-bisphthalonitrile with 4,4′-diaminodiphenyl ether in solvent phenol. The synthesized polymers were evaluated for thermal stability using dynamic thermogravimetric analysis (TGA). Polymers VII, VIII, IX , and X showed thermal decomposition temperature in the range of 475–500°C in nitrogen and air atmosphere. The char yield of the polymers was in the range of 60–69% in nitrogen at 800°C. This study indicated that synthesized thermosetting polymers from ether and keto containing bisimido-bisphthalo-nitrile are potential candidates for development of graphite composites. © 1993 John Wiley & Sons, Inc.     

Simultaneous measurement of glucose and glutamine in aqueous solutions by near infrared spectroscopy

A method is described for measuring the concentrations of both glucose and glutamine in binary mixtures from near infrared (NIR) absorption spectra. Spectra are collected over the range from 5000–4000/cm (2.0–2.5μm) with a 1-mm optical path length. Glucose absorbance features at 4710, 4400, and 4300/cm and glutamine features at 4700, 4580, and 4390/cm provide the analytical information required for the measurement. Multivariate calibration models are generated by using partial least squares (PLS) regression alone and PLS regression combined with a preprocessing digital Fourier filtering step. The ideal number of PLS factors and spectral range are identified separately for each analyte. In addition, the optimum Fourier filter parameters are established for both compounds. The best overall analytical performance is obtained by combining Fourier filtering and PLS regression. Glucose measurements are established over the concentration range from 1.66–59.91 mM, with a standard error of prediction (SEP) of 0.32 mM and a mean percent error of 1.84%. Glutamine can be measured over the concentration range from 1.10–30.65 mM with a SEP of 0.75 mM and a mean percent error of 6.67%. These results demonstrate the analytical utility of NIR spectroscopy for monitoring glucose and glutamine levels in mammalian and insect cell cultures.