重整汽油近红外光谱的稳健偏最小二乘解析

近红外光谱(ＮＩＲ)光谱复杂,组分间光谱重叠严重,目前,多元线性回归(ＭｕｌｔｉｐｌｅＬｉｎｅａｒＲｅ ｇｒｅｓｓｉｏｎ,ＭＬＲ)和偏最小二乘法(ＰａｒｔｉａｌＬｅａｓｔ ｓｑｕａｒｅｓ,ＰＬＳ)是近红外光谱分析中使用最多和效果较好的方法[1]。稳健偏最小二乘(ＲｏｂｕｓｔＰａｒｔｉａｌＬｅａｓｔ Ｓｑｕａｒｅｓ,ＲＰＬＳ)是由稳健统计学构造的具有稳健性能的多元校正方法。当化学测量中引入随机异常点或误差的内在分布偏离正态分布时,它仍能给予接近最优性能的校正,确保分析结果的准确性,是消除奇异点的非常有效的方法[2-4],…     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Photovoltaic effect and carrier transport mechanisms in Hg1-Mnxtdiodes

Hg_1-xMn_xTe semiconducting semimagnetic alloy has been examined in the context of its possible applications in infrared detectors. For analysis of detector properties the intrinsic carrier concentration has been calculated as a function of temperature and crystal composition. The starting material was In-doped Hg_1-xMn_xTe grown by the modified Bridgman method. The as-grown crystals with manganese content of 12-19% were p-type with carrier concentration and mobility of 100 cm²/ Vs at 77 K. An-type layer was formed on the surface by the annealing process in saturated Hg-vapour at 270-320° for 2 hrs. Capacitance-voltage curves have C^-3 dependence on applied voltage indicating that the junction is linearly graded. From standard electrical measurements and spectral characteristics the main detector parameters were determined and compared to those of Hg_1-xCd_xTe devices. The influence of material properties on detector parameters was analyzed. In order to estimate the carrier transport mechanisms, differential resistivities and current-voltage curves were measured over a wide range of temperaturesi.e. 25 to 300 K. From the temperature dependence of the R₀A product, it was established that at high temperatures (150-300 K) the carrier transport is dominated by a recombination-generation mechanism. In low temperature region the excess current at forward bias is probably attributed to carrier tunneling via energy states distributed randomly within the forbidden gap. At reverse bias the leakage surface or volume currents dominate in the carrier transport.     

Applications of chalcogenide glass optical fibers

Chalcogenide-glass fibers based on sulfide, selenide, telluride and their rare-earth-doped compositions are being actively pursued worldwide. Great strides have been made in reducing optical losses using improved chemical purification techniques, but further improvements are needed in both purification and fiberization technology to attain the theoretical optical losses. Despite this, chalcogenide-glass fibers are enabling numerous applications that include laser power delivery, chemical sensing, and imaging, scanning near field microscopy/spectroscopy, IR sources/lasers, amplifiers and optical switches.     

Specific and non-specific interactions of hydropseudohalic acids with water and organic solvents

Partition coefficients P of the HNCS, HNCO and HN₃ hydropseudohalic acids between a number of organic solvents and water were determined. It has been found that log P increases with pKa of the acid and with the basicity of the solvent, but the effect of pKa on P is the smaller the more basic is the solvent. The relationships have been explained in terms of hydrogen bond formation between undissociated acid and solvent molecules. H-bonding between the pseudohalic acids and organic solvents has been confirmed by IR spectra on the example of HN₃ in benzene. Association constants for H-bonding between the three acids and water, benzene, dibutyl ether and tri-n-butyl phosphate were determined from partition data. It has been found that H-bonding increases with the strength of the acid, whereas the contribution to partition from non-specific interactions with water and organic solvents depends on the molecular surface area of the acid molecule.     

Rapid biomass analysis

New, rapid, and inexpensive methods that monitor the chemical composition of corn stover and corn stover-derived samples are a key element to enabling the commercialization of processes that convert stover to fuels and chemicals. These new techniques combine near infrared (NIR) spectroscopy and projection to latent structures (PLS) multivariate analysis to allow the compositional analysis of hundreds of samples in 1 d at a cost of about $10 each. The new NIR/PLS rapid analysis methods can also be used to support a variety of research projects that would have been too costly to pursue by traditional methods.     

Ethanol/water pulp enzymatic pretreatment: Chemical and FTIR-PCA analyses

Pulps obtained from ethanol/water cooking of sugarcane bagasse were treated at different times using xylanase enzyme obtained from Thermomyces lanuginosus IOC-4145 or commercially (Cartazyme HS, Sandoz Products Ltd.). The enzyme dosage was 18 IU per g of dry pulp and the time varied from 4 h to 12 h. When xylanase from T. lanuginosus was used, the kappa number and viscosity improved independently of the processing time used (4 h, 8 h, and 12 h). After chemical evaluation, the obtained pulps were classified using Fourier Transformed Infra-Red Spectroscopy and Principal Component Analysis. The results showed that the first three principal components explained more than 90 % of the total variance of the pulp spectra.     

Infrared Evidence for Hoffman Reaction During Calcination of Surfactant-Templated Silica Films and Analysis of the Resulting Surface Sites

Fourier Transform Infrared transmission spectroscopy is used to characterize surfactant-templated silica films on glass. The calcination process is followed in situ and evidence for the removal of the surfactant along the Hoffman reaction is given. Once calcined, the surface of the pores of the mesoporous films is proven by deuteration experiment to be hydroxylated. Bands are attributed to isolated and hydrogen-bonded silanols. Silylation reaction with hexamethyldisilazane only occurs with isolated silanol groups.     

Occurrence and distribution of metals and porphyrins in Nigerian coal minerals

The metal contents of Nigerian coal minerals were analyzed using an atomic absorption spectrophotometer. Calcium, Na, and Fe occurred as the major elements with concentrations ranging from 9 782 μg/g for Ca to 432 μg/g for Na whereas K, Mg, Mn, Ni, Cr, Zn, Pb, and Cu, which occurred at trace levels ranged from 673.73 μg/g for Mg to 2.97 μg/g for Mn. The results of the quantitative analysis of porphyrins extracted from the coal minerals showed that Onyeama coal has the highest amount of porphyrins (ca～0.96 μg/g) while Okpara has the lowest (ca～0.30 μg/g). The porphyrins were qualitatively characterized by a combination of thin layer chromatography (TLC), infrared, and ultraviolet-visible spectrophotometers. The results of the mid infrared analysis (MIR) showed the presence of absorption bands at 3 440 cm～1～3 450 cm-1 and 1 640 cm-1～1 680 cm-1 , which are owing to the stretching vibrations of N - H and C = C of aromatics, with C- H out of plane (oop) bending vibrations at wavenumbers less than 900 cm-1, all of which are characteristic absorptions of porphyrin free base. The ultraviolet-visible data showed prominent peaks at ～400 nm(Soret band) and at wavelength ranges of 535 nm～550 nm(β-band) and 565 nm～ 600 nm (α-band) for the coal porphyrins analyzed. The geochemical significance of the metals and porphyrins in coal minerals are discussed.