同型二聚体肽模型的二维红外光谱

利用一个同型二聚体模型,甲酰胺二聚体,模拟一对肽基团.用量子化学从头计算考察了二聚体中酰胺-I带振动模式之间的振动耦合及其在空间的行为. 研究发现C=O伸缩振动耦合以静电作用为主,耦合有效距离能超过10 oA. 一维和二维红外光谱的激子模拟计算表明,耦合常数的空间依赖性能够清楚地表现在光谱特征中. 这些结果意味着多肽中C=O伸缩振动模式能够在很远的距离相互耦合并产生振动态的离域化.     

Mediated Generation of Conjugate Acid by UV and Blue Sensitizers with Upconversion Nanoparticles at 980 nm

NIR and UV exposure of systems comprising upconversion nanoparticles ( UCNP ) based on NaYF₄:Tm/Yb@NaYF₄, a sensitizer absorbing either in the blue or UV region, and an onium salt with weak coordinating anion resulted in formation of conjugate acid (con-H⁺). That was namely Ivocerin (di(4-methoxybenzoyl)diethylgermane), ITX (2-iso-propyl thioxanthone), anthracene, pyrene, rubrene, camphore quinone, and a strong fluorescent coumarin (1,1,6,6,8-pentamethyl-2,3,5,6-tetrahyhdro-1H,4H-11-oxa-3a-aza-benzo[de]anthracene-10-one). Quantification occurred by treatment with Rhodamine B lactone whose color switched to intensive red after photolytic formation of con-H⁺. Exposure with a NIR laser at 980 nm resulted in less con-H⁺ compared to 395 nm where all sensitizers absorb radiation. UCNP did not mainly interfered formation of con-H⁺. The different rates obtained in both experiments responsibly explain the failure and success to initiate polymerization of epoxides applying ether 980 nm or 395 nm excitation, respectively.     

一维纳米材料Cs0.2WO3和W18O49长度与红外吸收关联性的Mie散射理论推导及实验验证

研究表明二元、三元钨基氧化物的红外吸收性能具有尺寸和形貌依赖性,但还没有普适性的物理学机理及计算方法。本工作基于Mie散射理论,推导了一维材料的长度与光吸收性能之间的关系,通过理论推导计算和实验验证,探究了纳米钨基氧化物的红外吸收性能与颗粒长度的关联性。首先,基于Mie散射理论的推演和计算,揭示了增加纳米Cs_(0.2)WO_3和W_(18)O_(49)材料长度可适度提高其近红外吸收性能的规律。其次,测试了合成的不同长度Cs_(0.2)WO_3纳米棒和W_(18)O_(49)纳米线的红外吸收性能,结果与理论计算及模拟相吻合。其中在2 500～20 000 nm波长范围内Cs_(0.2)WO_3纳米棒和W_(18)O_(49)纳米线随长度的变化趋势不同,Cs_(0.2)WO_3纳米棒的红外吸收性能随长度的增加而增加,而W_(18)O_(49)纳米线的红外吸收性能随长度的增加而减弱。Cs_(0.2)WO_3纳米棒和W_(18)0O_9纳米线的光热效应均随长度的增加而增加,增幅分别达18.5%和12.7%,再次验证了长度效应。     

Near Infrared Spectroscopy of the Cretaceous Red Beds in Inner Mongolia DongshengmiaoSCIEI北大核心CSCD

Take the cores and surface weathered soil from the Cretaceous red beds in the western of Dongshengmiao mine of Inner Mongolia and analysis with near-infrared spectroscopy. The result shows that near-infrared spectroscopy can identify mineral quickly through the characteristic absorption peaks of each group. The Cretaceous red beds in the western of Dongshengmiao mine is argillaceous cementation, it is mainly composed of quartz, feldspar, montmorillonite, illite, chlorite, muscovite etc, the mineral composition is mainly affected by the upstream source area. The clay mineral like montmorillonite water swelling and uneven drying shrinkage expands the original crack and creates new cracks, reduces its strength, which is the mainly reason of its disintegration. According to the composition of clay mineral, we speculate its weathering process is mainly physical weathering, the climate during the weathering is cold and dry. The results can not only improve the geological feature of the mining area, but also show that the near-infrared spectroscopy technology can analyze the mineral composition of soil and rock effectively on the basis of Mineral spectroscopy, which demonstrates the feasibility of the near-infrared spectroscopy can analyze minerals in soil and rock quickly, that shows the feasibility in geology study, provides new ideas for the future research of soil and rock.     

Main Components of Xinjiang Lavender Essential Oil Determined by Partial Least Squares and Near Infrared SpectroscopySCIEI北大核心CSCD

This work was undertaken to establish a quantitative analysis model which can rapid determinate the content of linalool, linalyl acetate of Xinjiang lavender essential oil. Totally 165 lavender essential oil samples were measured by using near infrared absorption spectrum(NIR), after analyzing the near infrared spectral absorption peaks of all samples, lavender essential oil have abundant chemical information and the interference of random noise may be relatively low on the spectral intervals of 7100-4 500 cm(-1). Thus, the PLS models was constructed by using this interval for further analysis. 8 abnormal samples were eliminated. Through the clustering method, 157 lavender essential oil samples were divided into 105 calibration set samples and 52 validation set samples. Gas chromatography mass spectrometry (GC-MS) was used as a tool to determine the content of linalool and linalyl acetate in lavender essential oil. Then the matrix was established with the GC-MS raw data of two compounds in combination with the original NIR data. In order to optimize the model, different pretreatment methods were used to preprocess the raw NIR spectral to contrast the spectral filtering effect, after analysizing the quantitative model results of linalool and linalyl acetate, the root mean square error prediction(RMSEP) of orthogonal signal transformation (OSC) was 0.226, 0.558, spectrally, it was the optimum pretreatment method. In addition, forward interval partial least squares (FiPLS) method was used to exclude the wavelength points which has nothing to do with determination composition or present nonlinear correlation, finally 8 spectral intervals totally 160 wavelength points were obtained as the dataset. Combining the data sets which have optimized by OSC-FiPLS with partial least squares(PLS) to establish a rapid quantitative analysis model for determining the content of linalool and linalyl acetate in Xinjiang lavender essential oil, numbers of hidden variables of two components were 8 in the model. The performance of the model was evaluated according to root mean square error of cross-validation (RMSECV) 9 root mean square error of prediction (RMSEP). In the model, RESECV of linalool and linalyl acetate were 0.170 and 0.416, respectively; RMSEP were 0.188 and 0.364. The results indicated that raw data was pretreated by OSC and FiPLS, the NIR-PLS quantitative analysis model with good robustness, high measurement precision; it could quickly determine the content of linalool and linalyl acetate in lavender essential oil. In addition, the model has a favorable prediction ability. The study also provide a new effective method which could rapid quantitative analysis the major components of Xinjiang lavender essential oil.     

Optimized IR synchrotron beamline design

Synchrotron infrared beamlines are powerful tools on which to perform spectroscopy on microscopic length scales but require working with large bending‐magnet source apertures in order to provide intense photon beams to the experiments. Many infrared beamlines use a single toroidal‐shaped mirror to focus the source emission which generates, for large apertures, beams with significant geometrical aberrations resulting from the shape of the source and the beamline optics. In this paper, an optical layout optimized for synchrotron infrared beamlines, that removes almost totally the geometrical aberrations of the source, is presented and analyzed. This layout is already operational on the IR beamline of the Brazilian synchrotron. An infrared beamline design based on a SOLEIL bending‐magnet source is given as an example, which could be useful for future IR beamline improvements at this facility.     

基于小波高频距离像的红外小目标检测

针对远距离复杂背景下红外小目标检测问题,本文提出了一种基于小波高频距离像的方法。该方法首先将处理空间变换到小波域,通过分析残留背景、目标和噪声系数在高频子带的差异,定义基于邻域均值的子带系数表达形式,构造高频子带系数的中心向量,对小波高频图像进行综合形成距离像,得到红外复杂背景的抑制结果。在此基础上,利用恒虚警率算法将单帧背景抑制图像分割成候选目标、残留背景和噪声像素点。最后,在时间域基于目标运动的相关性,利用管道滤波实现红外小目标的最终检测。仿真实验结果表明,相对于经典算法,本文方法可以实现对红外复杂背景的有效抑制,增强目标信号的强度,准确稳定的从红外复杂背景中检测出小目标。     

Composition of oxygen precipitates in Czochralski silicon wafers investigated by STEM with EDX/EELS and FTIR spectroscopy

In this work, we investigated the stoichiometry of oxygen precipitates in Czochralski silicon wafers. The thickness dependence of the Cliff–Lorimer sensitivity factor for the silicon/oxygen system was determined and applied for the investigation of the stoichiometry of oxygen precipitates by EDX. The results show that both plate‐like oxygen precipitates and a transitional form between plate‐like and octahedral precipi‐ tates consist of SiO₂. This was confirmed by EELS low loss spectra where the typical spectrum for amorphous SiO₂ was observed. Moreover, the absorption band of plate‐like precipitates at 1227 cm^–1 was found in the low temperature FTIR spectrum. It was demonstrated that this band can only be simulated by the dielectric constants of amorphous SiO₂. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Fabrication of type-II InAs/GaSb superlattice long-wavelength infrared focal plane arrays

In this paper, we present an InAs/GaSb type-II superlattice (SL) with the M-structure for the fabrication of a long-wavelength (10 μm range) infrared (LWIR) focal plane arrays (FPA), which are grown by molecular beam epitaxy (MBE). The M-structure is named for the shape of the band alignment while the AlSb layer is inserted into the GaSb layer of InAs/GaSb SL. A 320 × 256 LWIR FPA has been fabricated with low surface leakage and high R₀A product of FPA pixels by using anodic sulfide and SiO₂ physical passivation. Experiment results show that the devices passivated with anodic sulfide obviously have higher R₀A than the un-sulphurized one. The 50% cutoff wavelength of the LWIR FPA is 9.1 μm, and the R₀A is 224 Ω cm² with the average detectivity of 2.3 × 10¹⁰ cm Hz^1/2 W⁻¹.