A novel design of membrane mirror with small deformation and imaging performance analysis in infrared system

A method of diminishing the shape error of membrane mirror is proposed in this paper. The inner inflating pressure is considerably decreased by adopting the pre-shaped membrane. Small deformation of the membrane mirror with greatly reduced shape error is sequentially achieved. Primarily a finite element model of the above pre-shaped membrane is built on the basis of its mechanical properties. Then accurate shape data under different pressures can be acquired by iteratively calculating the node displacements of the model. Shape data are applicable to build up deformed reflecting surfaces for the simulative analysis in ZEMAX. Finally, ground-based imaging experiments of 4-bar targets and nature scene are conducted. Experiment results indicate that the MTF of the infrared system can reach to 0.3 at a high spatial resolution of 10l p/mm, and texture details of the nature scene are well-presented. The method can provide theoretical basis and technical support for the applications in lightweight optical components with ultra-large apertures.     

Design and Performances of a Carbon Monoxide Sensor Using Mid-Infrared Absorption Spectroscopy Technique at 4.6 µm

Based on infrared absorption spectroscopy technique, a carbon monoxide sensor was developed using the fundamental absorption band of carbon monoxide molecule at the wavelength around 4.6 µm. The developed sensor consists of pulse-modulated wideband incandescence, open ellipsoid light-collector gas-cell, dual-channel detector, and control and signal-processing module. With the prepared standard carbon monoxide gas sample, sensing characteristics on carbon monoxide were investigated using the sensor. Experimental results reveal that the limit of detection is about 10 ppm, the relative error at the limit of detection point is less than 14%, and that is less than 7.8% within the low concentration range of 20～180 ppm. The maximum absolute errors of 50 min long-term measurement on the 0 and 14 ppm CO gas samples are about 3 and 3.17 ppm, respectively, and the standard deviations are as small as 0.18 and 1.25 ppm, respectively. Compared with the reported carbon monoxide detection systems utilizing quantum cascaded lasers and distributed feedback lasers, the proposed sensor shows potential applications in carbon monoxide detection under the circumstances of coal-mine and environmental protection, by virtue of high performance, low cost, simple optical structure, and so on.     

Analysis of the Chemical Composition of Red Pigments and Inks for the Characterization and Differentiation of Contemporary Prints

Prints are one of the most popular artistic forms. They consist of an original matrix that is printed on a paper support. The stamps are part of a series, and each series is composed of a particular number of prints. Many contemporary prints are made using oil inks and synthetic pigments (reds and yellows). Inks are mainly composed of pigments (organic or inorganic) and a binding medium. The analysis of inks has the potential to facilitate and complement the identification of stamps of different origins.

Fourier transform infrared spectroscopy (FTIR) and Scanning Electron Microscopy-Energy Dispersive X-ray (SEM-EDX) are techniques that are typically available in museums and centers related to the study of works of art. Both can be classified as micro-destructive and provide complementary information about the organic and some inorganic compounds (FTIR), and the elemental composition (SEM-EDX). In this article, the two techniques were used to analyze the composition of red ink in prints. As a result of these analyses, it was possible to distinguish among nearly all of the pigments and inks, indicating that the composition of the red ink can be reliably used to differentiate between stamps of different origins in a series of prints.     

Red/Near‐Infrared Emissive Metalloporphyrin‐Based Nanodots for Magnetic Resonance Imaging‐Guided Photodynamic Therapy In Vivo

Near‐infrared emissive (NIR) porphyrin‐implanted carbon nanodots (PCNDs or MPCNDs) are prepared by selectively carbonization of free base or metal complexes [M = Zn(II) or Mn(III)] of tetra‐(meso‐aminophenyl)porphyrin in the presence of citric acid. The as‐prepared nanodots exhibit spontaneously NIR emission, small size, good aqueous dispersibility, and favorable biocompatibility characteristic of both porphyrins and pristine carbon nanodots. The subcellular localization experiment of nanodots indicates a lysosome‐targeting feature. And the in vitro photodynamic therapy (PDT) results on HeLa cells indicate the nanodots alone have no adverse effect on tumor cells, but display remarkable photodynamic efficacy upon irradiation. Moreover, MnPCNDs containing paramagnetic Mn(III) ions, which possesses good biocompatibility, NIR luminescence, and magnetic resonance imaging and efficient singlet oxygen production, are further studied in magnetic resonance imaging‐guided photodynamic therapy in vivo.     

Liquid crystal mixtures for potential infrared applications

Liquid crystals (LCs) with diazo linkages have high dielectric and optical anisotropy. Two newly synthesized liquid crystalline compounds were dissolved in room temperature LC hosts, E7 and PTTP-24/36, to assess their properties. It was found that these mixtures have higher birefringence, larger dielectric anisotropy, and better elastic properties than the hosts. Satisfactory viscoelastic coefficients were also obtained for these mixtures, showing that they are promising LC materials for applications in the near IR region.     

Development of Near-Infrared Reflectance Spectroscopy Models for Quantitative Determination of Water-Soluble Carbohydrate Content in Wheat Stem and Glume

Water-soluble carbohydrate (WSC) reserved in stem is an important agronomic trait for crop improvement. The intact samples and pieces of chipped samples were employed to determine WSC content by near-infrared reflectance spectroscopy (NIRS). Three NIRS models were developed to predict WSC content in wheat stem lower internode, upmost internode, and wheat glume, respectively. Moreover, a mixed model was developed for WSC quantitative analysis in the mixed sample of the three wheat organs. Statistics analysis indicated that the four models showed a high determination coefficient (R² ≥ 0.97) and ratio of standard deviation to RMSECV (RPD ≥ 5.99). The NIRS models would allow rapid and high throughout assessments and selections of WSC contents in wheat genetics and breeding programs.     

Molecular Recognition in Glycolaldehyde,the Simplest Sugar: Two Isolated Hydrogen Bonds Win Over One Cooperative Pair

Carbohydrates are used in nature as molecular recognition tools. Understanding their conformational behavior upon aggregation helps in rationalizing the way in which cells and bacteria use sugars to communicate. Here, the simplest α-hydroxy carbonyl compound, glycolaldehyde, was used as a model system. It was shown to form compact polar C₂-symmetric dimers with intermolecular O–H⋅⋅⋅O=C bonds, while sacrificing the corresponding intramolecular hydrogen bonds. Supersonic jet infrared (IR) and Raman spectra combined with high-level quantum chemical calculations provide a consistent picture for the preference over more typical hydrogen bond insertion and addition patterns. Experimental evidence for at least one metastable dimer is presented. A rotational spectroscopy investigation of these dimers is encouraged, also in view of astrophysical searches. The binding motif competition of aldehydic sugars might play a role in chirality recognition phenomena of more complex derivatives in the gas phase.     

补偿强反光体表面红外测温误差的算法研究

针对运动强反光体表面温度实时测量困难、精度低这一难点,本文从红外测温原理入手,分析并揭示了红外测温精度易受到被测物体反射率、测量距离、测量环境、红外入射角等因素的影响。根据铝板材加工设备轧辊表面测温实际需要设计了一种利用红外传感器实现对强反光体表面温度点对点测量的方案。通过对测量数据的研究分析建立了一种基于斯忒藩定律的红外入射角度补偿算法,以此减小因红外入射角度变化产生的测温误差。实验结果证明本方法能较好地弥补红外入射角度变化产生的测温误差,提高测温精度。该补偿算法运算简单,适应性强,为改善入射角度变化对测温精度影响提供了新的方法。     

A Wall Effect in the Photothermal Beam Deflection Response of Infrared-Absorbing Gases

FTIR photothermal beam deflection (PBD) spectroscopy was used to record PBD spectra of IR-absorbing gases in presence of IR-absorbing and non-absorbing solids. The presence of the solid, IR-absorbing or not, causes asymmetry at the juncture of the IR and probe laser