Synthesis,characterization, and application of griseofulvin surface molecularly imprinted polymers as the selective solid phase extraction sorbent in rat plasma samples

In present study, an investigation was carried out to develop and validate an analytical method for the selective extraction and determination of griseofulvin (GSF) from plasma samples. For this purpose, a rational approach was made to synthesize and characterize the surface molecularly imprinted polymers (SMIPs). The SMIPs were utilized as solid phase extraction (SPE) sorbents. The SMIPs were prepared by using GSF as template molecule on the surface of modified silica particles through a non-covalent technique. The particles demonstrated high adsorption capacity (119.1 µg/mL), fast adsorption equilibrium time (30 min) and good recognition selectivity for the template drug. The scanning electron microscopy and infrared spectroscopy were used to explain the structural and morphological characteristics of the SMIPs and surface non-imprinted polymers. The SPE method was combined with HPLC for plasma analysis. The method validation results demonstrated that the established method possessed good linearity for GSF ranging from 0.1 to 50 µg/mL (R² = 0.997). The limit of detection for this method was 0.02 µg/mL for rat plasma samples. The recoveries of GSF from spiked plasma samples were (90.7–97.7%) and relative standard deviations were (0.9–4.5%). Moreover, the SMIPs as selective SPE sorbent can be reused more than 8 times which is a clear advantage over commercial SPE sorbents. Finally, the usefulness of the proposed strategy was assessed by extraction and detection of GSF in real rat plasma samples.     

O3有效钝化多孔硅的研究

开发了用O3氧化钝化多孔Si（PS）的实用工艺方法。O3的基本作用是对Si-Hx和Si悬挂键（DB）的充分氧化，经过随后158d贮存的老化实验，得到了表面Si—H，键完全被Si-O3膜和Si-烷基膜所替代并覆盖的PS，其光致发光（PL）强度达到稳定的增强，这归因于PS纳米晶粒的表面势垒高度的提高以及量子效率的提高。     

黑米花色苷酰化修饰红外光谱分析

黑米花色苷易受外部环境影响发生降解致使局部分子结构破坏而使营养价值和保健功能有所下降。利用有机酸提供酰基对黑米花色苷进行修饰来提高花色苷结构的稳定性。利用红外光谱分析经咖啡酸酰化修饰黑米花色苷的结构变化。结果表明：黑米花色苷酰化修饰前后于官能团区3 650~3 200和1 680~1 620 cm-1处均有吸收峰，且其于指纹区1 282.68和1 277.51 cm-1处出现酚羟基吸收峰，于1 056.07和1 054.03 cm-1处出现醇羟基吸收峰，719.90和719.71 cm-1处出现苯环上C-H面外弯曲振动吸收峰。由此可见，黑米花色苷酰化修饰后主要结构框架仍为花色苷的芳环结构。此外，黑米花色苷酰化修饰前后于1 900~1 650 cm-1间1 714.28和1 728.13 cm-1处均出现共轭羰基的特征吸收峰，对应于可直接连接在苯环上的α-羰基结构，由此说明黑米花色苷结构中存在着酰基基团。黑米花色苷经酰化修饰后红外图谱于1 517.20 cm-1处出现新吸收峰，其正好处于1 800~900 cm-1双键(不含氢)伸缩振动区，指纹区876.65 cm-1处亦出现了苯环上的C-H面外弯曲振动吸收峰。与之相呼应在经二阶导数处理后红外光谱图中在2 500～2 000 cm-1间出现了新的波动，此波段为累积双键伸缩振动区，而官能团区3 650~3 200 cm-1间3 370.20 cm-1处的吸收峰正好处于多分子缔合区。由此可见，在咖啡酸作为酰基供体，酰化修饰黑米花色苷时由于分子间的重新缔合于结构中引入了新的酰基基团而呈现出一种双酰化的空间结构。黑米花色苷酰化结构中有机酸与糖链相连，将有机酸置于2-苯基苯并吡喃骨架的表面，这种堆积作用模式可以较好地抵抗水的亲核攻击和其他降解反应进而提高黑米花色苷结构的稳定性。     

基于Zigbee无线传感器网络的智能灯光跟随系统

设计一个基于Zigbee的智能灯光跟随系统。系统中连接有人体红外热释电传感器的Zigbee结点等距离分布在走廊或道路的旁边,检测特定区域人员是否存在的信息,并将信息传于协调器节点,协调器节点连接主控制器PX-A270,PXA270根据采集的信息控制舵机的转向和照明装置的亮与灭,实现有人走动存在时,灯光随着人的转移而转移,无人时照明系统自动熄灭,从而实现节约能源的效果。     

A novel design of membrane mirror with small deformation and imaging performance analysis in infrared system

A method of diminishing the shape error of membrane mirror is proposed in this paper. The inner inflating pressure is considerably decreased by adopting the pre-shaped membrane. Small deformation of the membrane mirror with greatly reduced shape error is sequentially achieved. Primarily a finite element model of the above pre-shaped membrane is built on the basis of its mechanical properties. Then accurate shape data under different pressures can be acquired by iteratively calculating the node displacements of the model. Shape data are applicable to build up deformed reflecting surfaces for the simulative analysis in ZEMAX. Finally, ground-based imaging experiments of 4-bar targets and nature scene are conducted. Experiment results indicate that the MTF of the infrared system can reach to 0.3 at a high spatial resolution of 10l p/mm, and texture details of the nature scene are well-presented. The method can provide theoretical basis and technical support for the applications in lightweight optical components with ultra-large apertures.     

Design and Performances of a Carbon Monoxide Sensor Using Mid-Infrared Absorption Spectroscopy Technique at 4.6 µm

Based on infrared absorption spectroscopy technique, a carbon monoxide sensor was developed using the fundamental absorption band of carbon monoxide molecule at the wavelength around 4.6 µm. The developed sensor consists of pulse-modulated wideband incandescence, open ellipsoid light-collector gas-cell, dual-channel detector, and control and signal-processing module. With the prepared standard carbon monoxide gas sample, sensing characteristics on carbon monoxide were investigated using the sensor. Experimental results reveal that the limit of detection is about 10 ppm, the relative error at the limit of detection point is less than 14%, and that is less than 7.8% within the low concentration range of 20～180 ppm. The maximum absolute errors of 50 min long-term measurement on the 0 and 14 ppm CO gas samples are about 3 and 3.17 ppm, respectively, and the standard deviations are as small as 0.18 and 1.25 ppm, respectively. Compared with the reported carbon monoxide detection systems utilizing quantum cascaded lasers and distributed feedback lasers, the proposed sensor shows potential applications in carbon monoxide detection under the circumstances of coal-mine and environmental protection, by virtue of high performance, low cost, simple optical structure, and so on.     

Analysis of the Chemical Composition of Red Pigments and Inks for the Characterization and Differentiation of Contemporary Prints

Prints are one of the most popular artistic forms. They consist of an original matrix that is printed on a paper support. The stamps are part of a series, and each series is composed of a particular number of prints. Many contemporary prints are made using oil inks and synthetic pigments (reds and yellows). Inks are mainly composed of pigments (organic or inorganic) and a binding medium. The analysis of inks has the potential to facilitate and complement the identification of stamps of different origins.

Fourier transform infrared spectroscopy (FTIR) and Scanning Electron Microscopy-Energy Dispersive X-ray (SEM-EDX) are techniques that are typically available in museums and centers related to the study of works of art. Both can be classified as micro-destructive and provide complementary information about the organic and some inorganic compounds (FTIR), and the elemental composition (SEM-EDX). In this article, the two techniques were used to analyze the composition of red ink in prints. As a result of these analyses, it was possible to distinguish among nearly all of the pigments and inks, indicating that the composition of the red ink can be reliably used to differentiate between stamps of different origins in a series of prints.     

Red/Near‐Infrared Emissive Metalloporphyrin‐Based Nanodots for Magnetic Resonance Imaging‐Guided Photodynamic Therapy In Vivo

Near‐infrared emissive (NIR) porphyrin‐implanted carbon nanodots (PCNDs or MPCNDs) are prepared by selectively carbonization of free base or metal complexes [M = Zn(II) or Mn(III)] of tetra‐(meso‐aminophenyl)porphyrin in the presence of citric acid. The as‐prepared nanodots exhibit spontaneously NIR emission, small size, good aqueous dispersibility, and favorable biocompatibility characteristic of both porphyrins and pristine carbon nanodots. The subcellular localization experiment of nanodots indicates a lysosome‐targeting feature. And the in vitro photodynamic therapy (PDT) results on HeLa cells indicate the nanodots alone have no adverse effect on tumor cells, but display remarkable photodynamic efficacy upon irradiation. Moreover, MnPCNDs containing paramagnetic Mn(III) ions, which possesses good biocompatibility, NIR luminescence, and magnetic resonance imaging and efficient singlet oxygen production, are further studied in magnetic resonance imaging‐guided photodynamic therapy in vivo.     

Liquid crystal mixtures for potential infrared applications

Liquid crystals (LCs) with diazo linkages have high dielectric and optical anisotropy. Two newly synthesized liquid crystalline compounds were dissolved in room temperature LC hosts, E7 and PTTP-24/36, to assess their properties. It was found that these mixtures have higher birefringence, larger dielectric anisotropy, and better elastic properties than the hosts. Satisfactory viscoelastic coefficients were also obtained for these mixtures, showing that they are promising LC materials for applications in the near IR region.     

Development of Near-Infrared Reflectance Spectroscopy Models for Quantitative Determination of Water-Soluble Carbohydrate Content in Wheat Stem and Glume

Water-soluble carbohydrate (WSC) reserved in stem is an important agronomic trait for crop improvement. The intact samples and pieces of chipped samples were employed to determine WSC content by near-infrared reflectance spectroscopy (NIRS). Three NIRS models were developed to predict WSC content in wheat stem lower internode, upmost internode, and wheat glume, respectively. Moreover, a mixed model was developed for WSC quantitative analysis in the mixed sample of the three wheat organs. Statistics analysis indicated that the four models showed a high determination coefficient (R² ≥ 0.97) and ratio of standard deviation to RMSECV (RPD ≥ 5.99). The NIRS models would allow rapid and high throughout assessments and selections of WSC contents in wheat genetics and breeding programs.