Optically clear simultaneous interpenetrating polymer networks based on poly(ethylene glycol) diacrylate and epoxy. I. Preparation and characterization

Poly(ethylene glycol) diacrylate was synthesized from poly(ethylene glycol) of molecular weight 600 with acryloyl chloride in a molar ratio of 1:2. Poly(ethylene glycol) diacrylate (PEGDA) was then blended with diglycidyl ether of bisphenol A (DGEBA) in various ratios, followed by curing with 2,2′-azobisisobutyronitrile (AIBN) and isophronediamine (IPDA) simultaneously. Viscosity changes before and during IPN formation were examined with a Brookfield viscometer. Formation of H-bonding and functional group changes were investigated with FTIR. Exothermic curing thermograms were recorded with dynamic DSC. Optically clear IPNs thus obtained were characterized with rheometric dynamic spectroscopy (RDS) and scanning electron microscopy (SEM) to check possible compatibility of the two networks. Experimental results revealed that during IPN formation hydrogen bonds between PEGDA and DGEBA and interlock of networks had profound effect on viscosity change and pot-life. Complete compatibility of the IPNs was found as DGEBA content was higher than 50% by weight. The compatibility between PEGDA and DGEBA networks was evidenced from inner shift of a single damping peak in RDS. In the meantime, SEM micrographs confirmed the coincidence with the result of RDS © 1992 John Wiley &Sons, Inc.     

JEE—4x型真空镀膜仪功能扩展

报道了对ＪＥＥ－４ｘ型真空镀膜仪蒸发装置的改进以及建立蒸发材料回收装置的具体方法，并介绍了改进后该仪器在高分辨扫描电镜样品制备上的应用实例．实验证明，上述改进不但扩展了ＪＥＥ—４ｘ型真空镀膜仪的制样功能又节省了蒸发材料，集中了离子溅射法及常规高真空镀膜法的优点，完全满足ＳＥＭ样品的分析要求，该方法简单易操作．     

Retrieving definitional content for ontology development

Ontology construction requires an understanding of the meaning and usage of its encoded concepts. While definitions found in dictionaries or glossaries may be adequate for many concepts, the actual usage in expert writing could be a better source of information for many others. The goal of this paper is to describe an automated procedure for finding definitional content in expert writing. The approach uses machine learning on phrasal features to learn when sentences in a book contain definitional content, as determined by their similarity to glossary definitions provided in the same book. The end result is not a concise definition of a given concept, but for each sentence, a predicted probability that it contains information relevant to a definition. The approach is evaluated automatically for terms with explicit definitions, and manually for terms with no available definition.     

手性氨基酚配体及其衍生物在不对称催化中的应用

综述了手性氨基酚配体及其衍生物的研究进展, 着重介绍其在不对称催化烷基化、烯基化、Michael加成、aldol反应及环丙化等反应中的应用.     

银络合物在催化核上的还原反应

研究了尿嘧啶银络合物在胶态金属及其硫化物核上被对苯二酚还原的反应，并以Ａｇ和Ｐｔ电极代替催化核与对苯二酚显影剂和银络合物组成原电池作为电化学模型，分别测定该络合物阴极反应和对苯二酚阳极反应的电流。结果表明，原电池的电流大小与反应速度成正比关系，从而为物理显影电极理论提供实验依据。     

MAA存在下VAc/BA核壳乳液聚合过程中的胶粒形态研究

用ＴＥＭ和电位滴定法对不同配方和工艺条件得到的胶粒形态结构和羧基分别进行了表征。结果表明：加入甲基丙烯酸有利于胶粒的稳定和形成规则的核壳胶粒。半连续加料不会形成完全反转的核壳结构,但是,核层在反应过程中由于聚合物簇的迁移会造成形变。由于胶粒中聚合物浓度高,粘度大,因而胶粒形态变化受动力学影响甚大,羧基分布主要是由动力学确定的。     

超临界流体萃取仪器的研制

本文报道了以国产原配件为基础，成功地研制了分析规模的超临界流体萃取仪器、并对仪器性能进行了全面考察，仪器性能稳定，重现性良好（ＲＳＤ＜３．１％），定量线性关系可靠，可满足定量萃取的要求。     

Parameterization of OPLS-AA force field for the conformational analysis of macrocyclic polyketides

The parameters for the OPLS-AA potential energy function have been extended to include some functional groups that are present in macrocyclic polyketides. Existing OPLS-AA torsional parameters for alkanes, alcohols, ethers, hemiacetals, esters, and ketoamides were improved based on MP2/aug-cc-pVTZ and MP2/aug-cc-pVDZ calculations. Nonbonded parameters for the sp(3) carbon and oxygen atoms were refined using Monte Carlo simulations of bulk liquids. The resulting force field predicts conformer energies and torsional barriers of alkanes, alcohols, ethers, and hemiacetals with an overall RMS deviation of 0.40 kcal/mol as compared to reference data. Densities of 19 bulk liquids are predicted with an average error of 1.1%, and heats of vaporization are reproduced within 2.4% of experimental values. The force field was used to perform conformational analysis of smaller analogs of the macrocyclic polyketide drug FK506. Structures that adopted low-energy conformations similar to that of bound FK506 were identified. The results show that a linker of four ketide units constitutes the shortest effector domain that allows binding of the ketide drugs to FKBP proteins. It is proposed that the exact chemical makeup of the effector domain has little influence on the conformational preference of tetraketides.     

Quality assurance in research laboratories

During the last decade, it has become increasingly important that researchers demonstrate that research is conducted to the highest standards. The implementation of quality assurance for research laboratories will enable all fields of research and development to be judged impartially. There are no specific standards for research laboratories but where possible, existing standards can be adapted. This review is structured around two approaches. The first considers research to be a logical extension of testing, and it is assumed that testing standards can be applied methodically to each step in a research project. The second advocates a flexible approach, with research-specific criteria for assessing quality. The important papers published on this topic have been reviewed. The conclusions are that the general quality management approach, encompassed by the ISO 9000 series of standards with the emphasis on customer satisfaction and ‘fitness for purpose’, is suitable for implementing quality assurance in research laboratories.     

Quantitation in capillary electrophoresis-mass spectrometry

CE-MS has evolved into a strong alternative to LC-MS. Most of CE-MS applications deal with characterization and identification. However, quantitative aspects have gained importance in, e.g., pharmaceutical and biotechnological applications. Here we summarize and evaluate various methodological aspects in order to achieve sensitive and reproducible results. Similar to LC-MS, aspects of matrix influence on the electrospray process need to be carefully addressed when quantitative results are intended by CE-MS. Due to a more complicated coupling special emphasis needs to be put on the CE-MS interface. Generally linearity over more than three orders of magnitude can be achieved by CE-ESI-MS. Furthermore, a literature survey has been performed in order to give an overview over quantitative measurements performed by CE-MS. The precision can be doubled when changing from a structural related to an isotopically labeled internal standard. Thus a level of precision better than 5% RSD can be achieved.