Ordered arrangement of 9-aminoanthracene on Au(1 1 1) surfaces: A scanning tunneling microscopy study

We present a scanning tunneling microscopy (STM) investigation of 9-aminoanthracene (AA) on the reconstructed Au(1 1 1) surface. The bare Au(1 1 1) surface shows the herringbone reconstruction which is conserved upon deposition of the organic molecules. Most of the AA molecules are found to decorate the regions of fcc-stacking of the gold surface where a periodic linear arrangement is observed. The orientation of the long molecule axis of individual molecules is along the -directions of the Au substrate. In addition, for individual domains of the surface reconstruction, one of the three possible orientations is preferred. On substrate areas which exhibit a high step density, the steps are completely decorated by AA molecules. A detailed analysis of the STM images reveals that the molecules are located on top terrace levels. The fine structure of individual molecules on the terrace shows a clear dependence on the tunneling voltage and resembles the molecular orbitals of the free AA molecule.     

A scanning tunneling microscopy study of PH3 adsorption on Si(1 1 1)-7 × 7 surfaces, P-segregation and thermal desorption

PH₃ adsorption on Si(1 1 1)-7 × 7 was studied after various exposures between 0.3 and 60 L at room temperature by means of scanning tunneling microscopy (STM). PH₃-, PH₂-, H-reacted, and unreacted adatoms can be identified by analyzing empty-state STM images at different sample biases. PH_x-reacted rest-atoms can be observed in empty-state STM images if neighboring adatoms are hydrogen terminated. Most of the PH₃ adsorbs dissociatively on the surface, generating H- and PH₂-adsorbed rest-atom and adatom sites. Dangling-bonds at rest-atom sites are more reactive than adatom sites and the faulted half of the 7 × 7 unit cell is more reactive than the unfaulted half. Center adatoms are overwhelmingly preferred over corner adatoms for PH₂ adsorption. The saturation P coverage is ∼0.18 ML. Annealing of PH₃-reacted 7 × 7 surfaces at 900 K generates disordered, partially P-covered surfaces, but dosing PH₃ at 900 K forms P/Si(1 1 1)- surfaces. Si deposition at 510 K leaves disordered clusters on the surface, which cannot be reordered by annealing up to 800 K. However, annealing above 900 K recreates P/Si(1 1 1)- surfaces. Surface morphologies formed by sequential rapid thermal annealing are also presented.     

Material Discrimination in Nanoparticle Hetero-Aggregates by Analysis of Scanning Transmission Electron Microscopy Images

Hetero-contacts are interfaces between different materials at the nanoscale leading to novel functional properties. In hetero-aggregates, primary particles of at least two different materials are mixed at primary particle or cluster level. Double flame spray pyrolysis (DFSP) is a versatile technique for the controlled synthesis of such materials. Characterization of hetero-aggregates by scanning transmission electron microscopy (STEM) requires acquisition and evaluation of many aggregate images in order to derive statistically significant results. Usually, STEM energy dispersive X-ray spectroscopy (EDXS) is used to acquire elemental maps providing the material distribution of the primary particles within hetero-aggregates. However, the acquisition of a single EDXS map takes up to several minutes. For this reason, determination of material types of primary particles from the intensity in high-angle annular dark field STEM images alone is desirable. These images can be acquired within a couple of seconds. In the present work, a method is suggested which allows for achieving this objective. It can be applied to distinguish materials with a significant difference in their atomic number and hence sufficient material contrast in the STEM images.     

Near-grazing dynamics in tapping-mode atomic-force microscopy

In tapping-mode atomic-force microscopy, non-linear effects due to large variations in the force field on the probe tip over very small length scales and the intermittency of contact may induce strong dynamical instabilities. In this paper, a discontinuity-mapping-based analysis is employed to investigate the destabilizing effects of low-velocity contact on a lumped-mass model of an oscillating atomic-force-microscope cantilever tip interacting with a typical sample surface. As illustrated using two tip-sample force models, the analysis qualitatively captures the potential loss of stability and disappearance of a low-contact-velocity steady-state response. The quantitative agreement of the predictions of the discontinuity-mapping-based analysis with direct numerical simulations, at least for sufficiently low contact velocity, supports its use in the passive redesign or active control of the tip-sample mechanism for purposes of preventing such a loss of stability.     

AFM稳定性研究

“突跳”现象严重影响着原子力显微镜(AFM)的性能。根据W igner-Seitz模型微观连续介质理论,建立了AFM针尖同试样面接触力包含斥力的数学模型;由分析力学的稳定平衡条件,发现了引起AFM“突跳”的本质是不稳定平衡点的存在;通过增加AFM悬臂梁刚度,提出了一种避免AFM“突跳”现象发生的方法,并给出仿真结果。     

Direct Imaging of Octahedral Distortion in a Complex Molybdenum Vanadium Mixed Oxide

Complex Mo,V‐based mixed oxides that crystallize in the orthorhombic M1‐type structure are promising candidates for the selective oxidation of small alkanes. The oxygen sublattice of such a complex oxide has been studied by annular bright field scanning transmission electron microscopy. The recorded micrographs directly display the local distortion in the metal oxygen octahedra. From the degree of distortion we are able to draw conclusions on the distribution of oxidation states in the cation columns at different sites. The results are supported by X‐ray diffraction and electron paramagnetic resonance measurements that provide integral details about the crystal structure and spin coupling, respectively.     

Frenkel‐Defect‐Mediated Chemical Ordering Transition in a Li–Mn–Ni Spinel Oxide

Using spinel‐type Li(Mn_1.5Ni_0.5)O₄ with two different cations, Mn and Ni, in the oxygen octahedra as a model system, we show that a cation ordering transition takes place through the formation of Frenkel‐type point defects. A series of experimental results based on atomic‐scale observations and in situ powder diffractions along with ab initio calculations consistently support such defect‐mediated transition behavior. In addition to providing a precise suggestion of the intermediate transient states and the resulting kinetic pathway during the transition between two phases, our findings emphasize the significant role of point defects in ordering transformation of complex oxides.     

Ultrafast Electron Transfer Kinetics of Graphene Grown by Chemical Vapor Deposition

High electrochemical reactivity is required for various energy and sensing applications of graphene grown by chemical vapor deposition (CVD). Herein, we report that heterogeneous electron transfer can be remarkably fast at CVD‐grown graphene electrodes that are fabricated without using the conventional poly(methyl methacrylate) (PMMA) for graphene transfer from a growth substrate. We use nanogap voltammetry based on scanning electrochemical microscopy to obtain very high standard rate constants k⁰≥25 cm s^?1 for ferrocenemethanol oxidation at polystyrene‐supported graphene. The rate constants are at least 2–3 orders of magnitude higher than those at PMMA‐transferred graphene, which demonstrates an anomalously weak dependence of electron‐transfer rates on the potential. Slow kinetics at PMMA‐transferred graphene is attributed to the presence of residual PMMA. This unprecedentedly high reactivity of PMMA‐free CVD‐grown graphene electrodes is fundamentally and practically important.     

Single‐Molecule Methods to Study Membrane Receptor Oligomerization

Membrane receptors control fundamental cellular processes. Binding of a specific ligand to a receptor initiates communication through the membrane and activation of signaling cascades. This activation process often leads to a spatial rearrangement of receptors in the membrane at the molecular level. Single‐molecule techniques contributed significantly to the understanding of receptor organization and rearrangement in membranes. Here, we review four prominent single‐molecule techniques that have been applied to membrane receptors, namely, stepwise photobleaching, Förster resonance energy transfer, sub‐diffraction localization microscopy and co‐tracking. We discuss the requirements, benefits and limitations of each technique, discuss target labeling, present a selection of applications and results and compare the different methodologies.