Three-dimensional optical data storage through multi-photon confocal microscopy and imaging

Three dimensional optical data storage is one of the most promising tools to respond to the always growing demand for high data storage capacity. Here, we focused a femtosecond laser source by means of a confocal microscope onto different transparent recording media. The purpose of the study is to probe the capability of the system to independently address different data layers within the storage medium achieving thus three dimensional data storage. We demonstrated the possibility to write superposed independent layers of data due to either multiphoton excitation or to local optical breakdown and the performances observed in the different types of media used are compared.     

Enhancement of electrical properties due to Cr substitution in Co-ferrite nanoparticles synthesized by two chemical techniques

Nanocrystalline cobalt ferrites with nominal composition CoCr_xFe_2−xO₄ ranging from x=0.0 to 0.5 with step increment of 0.25 were prepared by sol–gel auto combustion and chemical co-precipitation techniques. A comparative study of structural, electrical and magnetic properties of these ferrites has been measured using different characterization techniques. Structural and micro-structural studies were measured using X-ray diffraction, Fourier transform infra-red spectroscopy (FTIR), scanning electron microscopy and atomic force microscopy. Crystallite sizes of the series are within the range of 12–29±2 nm. Lattice parameters decrease by increasing Cr³⁺ concentration. FTIR confirms the presence of two lattice absorption bands. DC electrical resistivity increases to a value of ∼10¹⁰ Ω-cm with increase in Cr³⁺ concentration, but the most significant increase is in samples prepared by sol–gel combustion. Dielectric properties have been measured as a function of frequency at room temperature. Dielectric loss decreases to 0.1037 and 0.0108 at 5 MHz for chemical co-precipitation and sol–gel combustion, respectively. Impedance measurements further helped in analyzing the electrical properties and to separate the grain and grain boundary resistance effects using a complex impedance analysis. Magnetic parameters were studied using a vibrating sample magnetometer in the applied field of 10 kOe. The saturation magnetization decreased from 63 to 10.8 emu/gm with increase in Cr³⁺ concentration.     

Influence of structural features on the self‐assembly of short ionic oligopeptides

We investigated the self‐aggregation of 12 short ionic oligopeptides constituted by 4–7 amino acid residues to establish useful structure–property relationships that might be exploited in the biomedical field by using the concept of molecular Lego. We show that the critical aggregation concentration (CAC) of tetrapeptides decreases with increasing hydrophobicity of neutral residues. Additionally, the dependence of the CAC of isomeric oligopeptides on the distribution of amino acid residues confirms the high tendency to self‐organization of molecules with alternating ionic and neutral residues. Indeed, atomic force microscopy (AFM) images recorded on oligopeptide solutions above the CAC show the presence of either fibrillar or spherical aggregates depending on oligopeptide structure and concentration, steric hindrance, solution pH, and time. The potential of the investigated oligopeptides in tissue engineering applications is supported by their in vitro cytocompatibility. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 889–897, 2010     

Synthesis of ZnO nanospheres with uniform nanopores by a hydrothermal process

ZnO nanospheres were successfully synthesized by a hydrothermal process (S1 sample) and a wet-chemical method (S2 sample). Following synthesis, calcination treatment at 450 °C was performed for the sample prepared by the wet-chemical method (S3 sample). All of the samples possessed a regular spherical shape. A polycrystalline wurtzite structure was confirmed in the S1 and S3 samples by X-ray diffraction and selected area electron diffraction, whereas a mixture of ZnO nanoparticles and amorphous materials was observed in the sample S2. The surface area and pore structure of the samples were investigated by nitrogen adsorption–desorption measurements. Uniform nanopores with a diameter of 4.07 nm were present in the S1 sample while a broad pore size distribution was obtained for the S2 and S3 samples. The highest surface area was obtained for the S1 sample and a possible formation mechanism was studied.     

Surface and electrochemical analysis for the understanding of TiO2 nanopores/nanotubes changes in post‐elaboration treatment

The electrochemical stability of TiO₂ nanoarchitecture fabricated in fluoride electrolyte presented in this paper is related to 2D and 3D geometries that present a shift from nanopores toward nanotubes. The fabrication conditions involve a 60 V applied voltage for 2 hours of anodizing in order to create the ordered structures, in a mixture of low‐water glycerol electrolyte and fluoride. With the use of different ultrasonication times, a variety of nanotubes/nanopores were observed. The surface interfacial aspects were investigated mainly by surface microscopy and hydrophilic/hydrophobic balance for the grown structures ultrasonicated at various periods of time. The electrochemical behavior of the nanotube‐structured surface was performed by potentiodynamic evaluation and electrochemical impedance spectroscopy in a simulated body fluid solution. As a most important result, all surface analysis and electrochemical data interpretation permitted the proposition of a model for elaboration of different nanostructures from nanopores to nanotubes. These different surface nanoarchitectures were obtained as a result of ultrasonication at various periods of time. Copyright © 2010 John Wiley & Sons, Ltd.     

Ion implantation effects on the microhardness and microstructure of GaN

We study the effect of N⁺ and O⁺ implantation on the microhardness and the microstructure of epitaxially grown GaN. The microhardness is measured using a Knoop diamond indenter while information on the effect of implantation on the surface morphology, microstructure and electronic structure is provided by atomic force microscopy, cross-section transmission electron microscopy and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. It is demonstrated that implantation increases the surface microhardness. A possible mechanism for the surface hardening effect is based on the formation of N interstitials that pin the dislocations and prohibit the plastic deformation. In addition to the hardening effect, the implantation induced N interstitials introduce a characteristic resonance in the NEXAFS spectra, at 1.4 eV below the absorption edge.     

Optical inspection and characterization of microoptics using confocal microscopy

With the growing demand for microoptics in different areas the importance of the characterization increases. Methods for a fast defect detection in microlens arrays are developed. We present a technique where the confocal principle is applied for determining the variation and the absolute value of the focal length. Additionally, using a self–filtering method the deviation of the periodic structure of microlens arrays is investigated theoretically and experimentally. Point-like defects as well as aberrations have been detected. The introduced methods allow the fast, parallel characterization of microlens arrays.