Characterization of Ultrathin Films of Cellulose Esters

The adsorption of cellulose acetate (CA), cellulose acetate propionate (CAP) and cellulose acetate butyrate (CAB) from solutions prepared in acetone onto silicon wafers led to ultrathin films, which were characterized by ellipsometry, atomic force microscopy (AFM) and contact angle measurements. The polysaccharides films were characterized in the air just after their formation and after annealing at temperatures higher than their glass transition temperature or melt temperature. The films thickness close to 2 nm and surface roughness did not vary significantly upon annealing. AFM images revealed the presence of small clumps dispersed on a homogeneous layer, which covered completely the Si wafers. Such topographic details were also observed after annealing. However, upon annealing the films surfaces changed from hydrophilic to hydrophobic, evidencing molecular re-orientation at the solid–air interface. The adhesion of bovine serum albumin (BSA) and lipase onto the cellulose esters films was quantified in order to evaluate the possibility of applying such films as selective support for biomolecules.     

Influence of the conditions of manufacture of nanomeric zirconium dioxide,stabilized with yttrium oxide,on its catalytic properties in the oxidation of CO

The morphological and catalytic properties of samples of nanomeric zirconium dioxide, stabilized with yttrium oxide, manufactured via the effect of a UHF field during the process of drying precipitated zirconium hydroxide and calcination at temperatures from 300 to 1000 °C, were studied. It was shown that the highest activity in the oxidation of CO occurred with 40 nm particles of zirconium dioxide prepared at 1000 °C. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 2, pp. 96–101, March–April, 2007.     

Macroporous poly(methyl methacrylate) produced by phase separation during polymerisation in solution

Polymethyl methacrylate (PMMA) sponges were obtained by polymerization in a solution with monomer/ethanol ratios up to 20:80. The material obtained after the elimination of the solvent present a homogeneous distribution of dispersed pores up to a monomer/ethanol ratio lower than 40:60. For higher ethanol contents in the reacting mixture, the morphology of the sponge corresponds to a network of PMMA microparticles, leaving large empty spaces leading to highly porous structure. The monomer/ethanol ratio during polymerization has a large influence on the porosity, thermal, and mechanical properties of the material and, for large solvent contents, on the size of the polymer microparticles.     

Age related changes in the thermal transition of Turkey leg flexor tendon collagen

A differential scanning calorimetric, thermogravimetric and electron microscopic investigation has been carried out on the uncalcified areas of turkey leg flexor tendon as a function of age. Rehydrated samples exhibit an increase of thermal stability with age. The H_D values drop from about 11 cal·g^–1 in the first weeks of life down to 7 cal·g^–1 after the 11th week.At about 11 weeks, the collagen fibril diameter distribution passes from unimodal to multimodal. The DSC curves as well as the TG-DTG curves recorded from dried samples do not show any appreciable difference with ageing. The variations in thermal behaviour of rehydrated samples and fibril diameter distribution could be related to modifications in water binding with ageing.The Authors are grateful to Dr. G. Fabris for discussion and help in the selection of the samples. They also wish to thank Mr. G. Pizzuto for excellent technical assistance. The financial support by Consiglio Nazionale delle Ricerche is gratefully acknowledged.     

Strained Structure in Ho0.5Sr0.5MnO3

The Ho_0.5Sr_0.5MnO₃ perovskite, synthesized in air, has been studied by combining neutron powder and electron diffraction techniques. The Pnma-type structure exhibits a strong tilting of the MnO₆ octahedra. This octahedra tilting and microtwinning involve a complex strained structure. No structural transition is observed down to 1.4 K, but short-range A-type antiferromagnetism running over only a few perovskite subcells is evidenced below ≈90 K. The different behavior of this perovskite compared to other Ln_0.5Sr_0.5MnO₃ perovskites is discussed in terms of A-site cationic mismatch.     

LIGHT-SCATTERING STUDY OF POLYELECTROLYTE HOLLOW CAPSULES

Silver halide (AgX) microcrystal was used as template to synthesize hollow polyelectrolyte capsules. These hollow capsules were characterized by laser light scattering (LLS) used to measure the size of the capsules in solution. The ratio of hydrodynamic radius (Rh) from dynamic LLS to the radius of gyration (Rg) from static LLS is almost unity, revealing that the entities are hollow in solution. The results suggest that the LLS method can be regarded as a good complement to the confocal laser scanning microscopy (CLSM) method for the characterization of small hollow capsules, and it possesses the advantage of not needing fluorescence labeling.     

Voltage-Height Spectroscopy in the <Emphasis Type="Italic">Ex Situ</Emphasis> Configuration of a Scanning Tunneling Microscope

Basic regularities of electrochemical processes in the gap of an ex situ scanning tunneling microscope in conditions of condensation of air moisture at the sample surface are considered on a qualitative level. A layer of condensed moisture is viewed as an electrolyte in a two-electrode cell. The depolarizers present in this layer may experience electrochemical conversions on the tip and in an area of the sample surface near the tip. As a result, the recorded “tunneling” current includes electrochemical constituents. Depending on the electrochemical processes in the gap, various dependences of the tip-sample distance on the current and applied voltage can be expected. For preliminary diagnostics of processes in the gap it is suggested to use voltage-height spectra, whose shape and characteristic heights are sensitive to the nature and location of redox active species. Experimental data for various films on conducting supports (quasi-two-dimensional adsorbed layers of hemin and peroxidase, electrodeposited nonstoichiometric tungsten oxides, doped tin dioxide, solid electrolyte with ionic conduction) are presented as an examples.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 583–595.Original Russian Text Copyright © 2005 by Yusipovich, Vassiliev.     

Dynamic imaging of single DNA-protein interactions using atomic force microscopy

Atomic force microscopy (AFM) imaging of static DNA-protein complexes, in air and in liquid, can be used to directly obtain quantitative and qualitative information on the structure of different complexes. For example, DNA length, the location of preferential binding sites for proteins and bending of DNA as a result of the complexation can all be measured. Recording consecutive AFM images of DNA and protein molecules under conditions that they are still able to move and interact, or dynamic AFM imaging, however, can reveal information on the dynamic aspects of the interactions between these molecules. Here, an overview is given of the technical challenges that need to be considered for successful dynamic AFM imaging studies of individual DNA-protein interactions. Necessary technical improvements to the AFM set-up and the development of new sample preparation methods are described in this paper.