A branching process model for sand avalanches

An analytically solvable model for sand avalanches of noninteracting grains of sand, based on the Chapman-Kolmogorov equations, is presented. For a single avalanche, distributions of lifetimes, sizes of overflows and avalanches, and correlation functions are calculated. Some of these are exponentials, some are power laws. Spatially homogeneous distributions of avalanches are also studied. Computer simulations of avalanches of interacting grains of sand are compared to the solutions to the Chapman-Kolmogorov equations. We find that within the range of parameters explored in the simulation, the approximation of noninteracting grains of sand is a good one.     

千兆比以太网技术

千兆比以太网是一种新型高速局域网，它一方面兼容传统以太网的主要标准结构，保护了用户先前的投资和系统配置，并使系统升级方便，以较实际的价格赢得了支持的发展。另一方面，它又采纳了光纤通道的低层协议以及其他一些在行兆比速率下应作的改进，使它获得了高速宽带性能。本文还列举了从快速以太网和ＦＤＤＩ向千兆比以太网迁移的网络配置策略。     

降低射频电路串扰噪声的布线方法

研究并解决了无障碍多层无网格射频电路的布线问题,主要包括三个部分:设计规则、串扰噪声限制和布线方法.首先通过设计规则计算连线参数,运用RLc模型估算串扰噪声,然后,按照需要连接的实节点个数进行归类并提出相应的布线算法.实验结果表明,该布线方法可有效地降低射频电路的串扰噪声.     

Performance Enhancement for Optical Fast Frequency-hopping CDMA Systems by BCH Channel Coding

In this paper, the impact of optical beat noise on the performance of optical fast frequency-hopping code-division multiple-access (FFH OCDMA) networks is analyzed. BCH/FFH-OCDMA to reduce the impact of optical beat noise is proposed. It is shown that, BCH/FFH-OCDMA has much better performance under the same bit rate, same chip time and same number of available wavelengths. Another advantage for BCH/FFH-OCDMA is that the code length of one-coincidence sequence will be shorter, which can greatly reduce the difficulty of fabrication for fiber gratings.     

Acoustic characterization and prediction for fan-duct-plenum-room integrations

This paper investigates mutual influence of duct and room acoustics in the whole fan-duct-plenum-room integrations. Applying the parametric design language of finite element software ANSYS (APDL), dimensional and positional influence on system acoustics has been studied. Models with different room dimensions, duct lengths, duct cross-sections, duct locations, duct discharges and duct elbow were constructed, and their characteristics were compared qualitatively. Results show that small rooms, short ducts, large duct cross-sections and bell mouth duct discharges help to increase room sound pressure levels (SPLs); SPLs in ducts and plenums are sensitive to duct dimensions and duct discharge types but insensitive to duct locations and room dimensions; duct elbows have relatively indistinct acoustic influence in each component. Based on the calculation results, a semi-experimental method was proposed for simply and approximately evaluating indoor acoustic spectra of fan-duct-plenum-room integrations, then an example was used to demonstrate the prediction process. Finally, by adopting several ideal models, sound field constitutions, duct and room wall admittances and duct end reflection were explored quantitatively. This study may give a detailed understanding of fan-duct-plenum-room acoustics for researchers, also it might provide a new, simple and approximate prediction method for professionals to evaluate and improve fan-ducted acoustics.     

Generation of 3rd and 5th harmonics in a thin superconducting film by temperature oscillations and isothermal nonlinear current response

The generation of harmonics of the voltage response is considered when an AC current is applied through a superconducting film above T_c. It is shown that almost at all temperatures the mechanism of the temperature oscillations created by the AC current and the temperature dependence of the resistance dominates over the isothermal nonlinear electric conductivity. Only in a narrow critical region close to T_c the latter is essential for the generation of the harmonics. A detailed investigation of harmonics generation provides an accurate method for measuring the thermal boundary conductance between the film and the insulating substrate. The critical behaviour of the third harmonic will give a new method for the determination of the lifetime of metastable Cooper pairs above T_c. The comparison of the calculated fifth harmonics of the voltage with the experiment is proposed as an important test for the applicability of the employed theoretical models. Received 8 September 2001     

An ASE Reduction Filter Using Cascaded Optical Fiber Grating Couplers in EDFA Repeater

A new configuration for an ASE reduction filter in EDFA repeaters for WDM optical transmission systems using optical fiber grating couplers (FGCs) was proposed and first demonstrated. The filtering characteristics of the proposed filter for amplified single wavelength signal and 2-channel WDM signals using EDFA were identified. It was found that the filter was effective to improve SNR in optical domain by reducing ASE noise. The required FGC characteristics for the filter were theoretically predicted under the condition that the total filter loss did not exceed 3 dB. More than 70% of drop efficiency was required in each FGC for the application of the proposed filter to an 8-channel WDM system using EDFA repeaters.     

Effect of hardness and composition gradients on Barkhausen emission in case hardened steel

The effect of gradients in hardness, structure and composition in the surface layers on magnetic Barkhausen noise (MBN) was investigated in two widely used low alloy steels. One material was case hardened by induction hardening. The other was case carburised. Similar hardness profiles were produced by the two treatments. It was found that the variation in structure and hardness through the case in the induction-hardened steel had a minor effect on the MBN profile. In contrast, the inhomogeneity in the case-carburised material showed up clearly. This took the form of a broadened or two-peak MBN profile. When the surface layer containing the case was removed by etching, the broadened profile was replaced by a profile with a single peak. It is concluded that the shape and position of the MBN profile is significantly affected when a gradient in microstructure is induced by a gradient in carbon content. On the other hand, a gradient in microstructure induced by heat treatment with a constant carbon level has much less affect on the MBN profile for the induction-hardened steel.     

Hot carrier magnetophonon spectroscopy of semiconductors in high magnetic fields up to 40 T

Hot carrier magnetophonon resonances of n-type Si, short channel InP and p-type InSb were investigated in pulsed high magnetic fields up to 40 T. Using a recently developed high resolution technique in pulsed high fields, many new features of the hot carrier-phonon interactions in high magnetic fields were found.     

Reconfiguration Aspects and a Reconfigurable Outer Block Interleaver for 3G Applications

Reconfiguration concept represents reconfigurable functionalities of the radio interface for mobile radio systems. Particularly for the physical layer, some possible reconfigurable architectures can be identified. We focus on outer interleaving for turbo codes, which can improve their performance in flat Rayleigh fading environment. The larger the number of columns in the outer interleaver, the better is the performance, but with the penalty of more complexity and delay. Furthermore, an incorrect choice of the number of columns can increase the bit and frame error rates. Therefore, it would be advantageous to reconfigure the outer interleaver in different operating environments with the optimum number of columns. Using two different data frame lengths, in this contribution simulation results are presented for the four possible outer block interleaver configurations specified for the 3GPP mobile standard in the case of flat Rayleigh fading channel. It is shown that different operating environments require an optimum number of columns in terms of bit error rate and frame error rate performance. Finally, frame fade duration is considered and the effect of the product of the Doppler frequency with the frame duration on the performance for the four different 3GPP outer block interleaver configurations is discussed. Costas Chaikalis was born in Athens, Greece, on March 7, 1973. He received the B.Sc. degree in electrical engineering in 1995 from Technological Educational Institute of Lamia, Greece. He also received the M.Sc. and Ph.D. degrees from Department of Electronics and Telecommunications, University of Bradford, Bradford, UK in 1999 and 2003, respectively. During his doctoral studies he worked as a Research Assistant for Mobile Virtual Center of Excellence (Mobile VCE), Terminals Group, UK. Since 2003, he is a lecturer in the Department of Electrical Engineering, Technological Educational Institute of Lamia, Greece. His research interests are in all areas of mobile communications but especially in forward error correction coding, reconfigurable (software radio) architectures, cross layer architectures and DSP applications.