In situ sensing of the middle atmosphere with balloonborne near-infrared laser diodes

Since 1997, two near-infrared laser diode sensors have been developed with the support of the CNES, the French space agency, to provide in situ data of H(2)O, CH(4) and CO(2) in the middle atmosphere. The realized instruments were flown from stratospheric balloons within the framework of European campaigns for the study of stratospheric ozone and water vapor and were involved in the validation of the ODIN and ENVISAT satellites. In this paper, we describe the developed laser probing technique, we report atmospheric measurements and finally we discuss future perspectives, particularly the in situ laser sensing of the lower atmosphere of Mars and the implication of the laser hygrometers in balloon campaigns at mid-latitudes and tropical regions to investigate the sources and sinks of stratospheric H(2)O.     

基于荧光熄灭的二氧化硫选择性光化学敏感膜的研究

本文基于二氧硫对固定于增塑的聚氯乙烯膜上的芳香稠环化合物蒽的荧光熄灭，研制了二氧化硫选择性光化学敏感膜，经过组成优化 的敏感膜测定二氧化硫的浓度范围为6．59×10^-3-5.23×10^-1mol/L，校正曲线与理论推导的模拟曲线相吻合，且荧光信号具有较高的重现性，信号响应时间为5－30s.     

Ag@Au core/shell triangular nanoplates with dual enzyme-like properties for the colorimetric sensing of glucose

Due to the serious harm of diabetes to human health, development of sensitive assays for glucose level is of high significance for early prevention and treatment of diabetes. Currently, most conventional enzyme-based glucose sensors suffer from high cost and low stability due to the inherent defects of natural enzymes. Herein, we develop a pure nanozyme-based glucose detection method using Ag@Au core/shell triangular nanoplates (TNPs), which combines glucose oxidase (GOD)- and horseradish peroxidase (HRP)-like activities of the Au shell and inherent plasmonic properties of Ag TNPs. The sensing mechanism is based on the fact that the Au shell possessed GOD-like activity, enabling the oxidation of glucose to produce H₂O₂, which can further etch the silver core, leading to the decrease of absorbance at 800 nm and the color change from blue to colorless. Compared with the previous nanozymes-based glucose sensors, our method avoids the use of enzymes and organic chromogenic agent. Moreover, the stability of the Ag@Au core/shell TNPs is much better than that of Ag TNPs due to the protection by the coating of the Au shell. This method was successfully applied to the detection of urine samples from patients with diabetes, indicating its practical applicability for real sample analysis.     

A High Sensitivity Fluorescent Chemo-sensory System Based on β-Cyclodextrin Dimer Modified with Dansyl Moieties

-Cyclodextrin dimer linked with ethylenediamine at the upper rim of the cyclodextrin has been synthesized and then modified with two dansyl moieties inthe presence of N,N'-dicyclohexylcarbodiimide. The sensing ability and bindingproperty of the title compound were investigated for steroids and terpenoids. Thefluorescence intensity of this dimer was decreased when a host–guest complex was formed. The value I/I⁰, where I⁰ and I are fluorescence intensitiesin the absence and presence of a guest and I is I⁰- I, was used as a parameter of sensitivity. This host exhibited a much higher sensitivity and selective molecular recognition ability for bile acids such as ursodeoxycholic acid andchenodeoxycholic acid and terpenoids such as (-)-borneol than the dansyl-modifiedcyclodextrins reported previously including -cyclodextrin dimer. The behaviors of the appended moieties of the host during the formation of host–guest complexes were studied using induced circular dichroism (ICD) and fluorescence spectra. The ICD intensityof this dimer was decreased on accommodation of a guest and this spectral pattern of the title dimer was opposite to that of bis dansyl-modified -cyclodextrin monomer. Theguest-induced variations in the fluorescence and ICD intensities suggest that this dimer formed a 1 : 1 host–guest complex and the appended moieties act as a hydrophobic cap.     

Creation of highly functional thin films using electrochemical nanotechnology

This overview describes the results of our recent study of the application of electrochemical nanotechnology to the fabrication of magnetic recording materials, interconnects in ultra-large-scale integrated (ULSI) devices, energy storage materials, and on-chip biosensors. It is important to note that electrochemical processes play significant roles in developing and fabrication such sophisticated materials and devices. In the field of magnetic recording, electrodeposition methods for preparing CoNiFe and CoFe soft magnetic thin films with a high saturation magnetic flux density were newly developed, and the significant issues for obtaining those films are highlighted. In the area of ULSI interconnects, we developed a technique using a self-assembled monolayer (SAM) for direct bonding of the interconnect layer to SiO2, and proposed a novel electroless deposition method for fabricating a diffusion barrier layer. In the field of batteries, electrodeposited SnNi alloy was proposed as a future anode material for Li batteries, and electrochemical MEMS processes were shown to be useful for fabricating micro-sized direct methanol fuel cells (DMFCs) as portable batteries for electronics applications. In the area of chemical sensors, we developed a new process for fabricating field effect transistors (FETs) modified with SAMs for on-chip biosensing applications.     

甾醇边链的化学修饰

本文对近年来甾醇边链结构改造的新方法和新动向--Barton 的Gif系统氧化反应及Breslow的远程功能化反应进行了综述。     

Progress in the realisation of an autonomous environmental monitoring device for ammonia

Progress in the development of a micro-fluidic system for colorimetric monitoring of ammonia in drinking and wastewater is described. The ultimate goal is to have a miniaturised instrument that can produce accurate, reliable measurements, is easy to operate, has minimal power consumption, and can operate autonomously for a year. In this study, the indophenol reaction is incorporated into a simple, reliable analytical micro-fluidic system. Absorbance measurements for the blue ammonia-indophenol complex formed in the micro-fluidic system are shown. A key issue is the limiting stability of hypochlorite, a reagent used in the assay. The effects of hypochlorite concentration and impurities on the stability of hypochlorite are investigated and discussed. Decomposition is shown to be very dependent on the presence of heavy-metal impurities. With low levels of these catalytic metals and careful storage, hypochlorite has been shown to be stable for over a year.     

Mono- and oligosaccharide sensing by phenylboronic acid-appended 5,15-bis(diarylethynyl)porphyrin complexes

Porphyrin derivatives bearing a pair of boronic acid groups (1, 1·Zn, and 1·Cu) were designed and synthesized from 2 to construct a saccharide sensing system. Compounds 1, 1·Zn, and 1·Cu have a diethynyl porphyrin rotational axis, which is expected to act as a saccharide-binding modulator. Saccharide binding studies were conducted by UV-vis, fluorescence, and circular dichroism (CD) spectroscopies. In a water-methanol 1:1 (v/v) mixed solvent, we have found that 1·Zn can bind mono- and oligosaccharides including Lewis oligosaccharides to produce 1:1 host-saccharide complexes with the association constants of 10²−10³ M⁻¹ range. This paper thus demonstrates a new principle to design a boronic acid-based saccharide receptor.     

Generation and reactions of novel oxiranyl ‘Remote’ anions

Deprotonation of an oxiranyl β-proton takes place in a stereoselective manner providing the corresponding oxiranyl ‘remote’ anion. The anion is stabilized by chelation between the lithium and the carbonyl moiety of an ester, lactone, imide, or keto-group in the form of a five-membered cyclic intermediate. Certain ester-stabilized oxiranyl anions are stable and can be left in THF solution at −78°C for several hours. The generated anions undergo a stereoselective alkylation reaction to provide products, which could be useful intermediates in the synthesis of bioactive naturally occurring α-methylene bis-γ-butyrolactones.     

Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.