Filament-activated chemical vapour deposition of nitride thin films

We have applied the novel method of hot filament-activated chemical vapour deposition (HFCVD) for low-temperature deposition of a variety of nitride thin films. In this paper the results from our recent work on aluminium, silicon and titanium nitride have been reviewed. In the HFCVD method a hot tungsten filament (1500–1850°C) was utilised to decompose ammonia in order to deposit nitride films at low substrate temperatures and high rates. The substrate temperatures ranged from 245 to 600°C. The film properties were characterised by a number of analytical and optical methods. The effect of various deposition conditions on film properties was studied. All the films obtained were of high chemical purity and had very low or no detectable tungsten contamination from the filament metal.     

Organic electroluminescent device with aromatic amine-containing polymer as a hole transport layer (II): Poly(arylene ether sulfone)-containing tetraphenylbenzidine

Organic electroluminescent devices were fabricated using a poly(arylene ether sulfone)-containing tetraphenylbenzidine (PTPDES) and tris(8-quinolinolato)-aluminum(III) complex, Alq, as the hole transport layer and the electron-transporting emitter layer, respectively. A device structure of glass substrate/indium—tin oxide (ITO)/PTPDES/Alq/Mg : Ag was employed. Hole injection from ITO through the PTPDES layer to the Alq layer and concomitant electroluminescence from the Alq layer were observed. Bright green light with a luminance of 14,000 cd/m² was observed at a drive voltage of 14 V, indicating that the polymer possesses a high hole mobility and a high electron-blocking capability.     

ZnS作为空穴缓冲层的新型有机发光二极管

采用磁控溅射方法在ITO表面沉积了不同厚度的ZnS超薄膜作为有机发光二极管(OLEDs)的缓冲层,使典型结构(ITO/TPD/Alq3/Al)的OLEDs的发光性能得到改善。ZnS缓冲层厚度对器件性能影响的实验结果表明,当ZnS缓冲层厚度为5nm时,器件电流密度提高了近2倍,亮度提高了2倍;当ZnS缓冲层厚度为10nm时,器件发光的电流效率提高18%,器件的性能得到改善。宽禁带的ZnS缓冲层对空穴从阳极到有机功能层的注入有阻碍作用,促进器件载流子平衡,提高了器件发光效率,改善了器件性能。     

理论研究电流注入对垂直腔面发射激光器多横模行为的影响

从包含时空变量的速率方程出发,针对弱折射率导引垂直腔面发射激光器(VCSELs),利用空间积分法分析了典型电注入参数对VCSELs多横模行为的影响,在不降低模型准确性的前提下提高了仿真效率。仿真结果表明,注入盘孔径和注入环越小、注入强度越低以及电流扩散越弱时,VCSELs更易实现单横模工作;反之,VCSELs高阶横模开始出现并呈现较强的模式竞争,引发了载流子空间烧孔效应,并导致基模强度降低。进一步得出,在环形注入方式下,高阶模式更容易出现且彼此间的竞争较盘形注入时强。     

TEA CO2激光器11μm波段谱线特性研究

采用双光栅谐振腔和增长放电增益区的方法,进行了TEA CO2 激光器11μm波段谱线输出特性研究。在混合气体的比例为CO2 ∶N2 ∶He = 70∶90∶270和总压430 ×133. 3Pa情况下,获得数条谱线的激光输出。着重研究了波长为11013nm 的激光谱线的输出特性,其脉宽为400ns左右,且脉宽随电压变化。谱线能量随光栅中心的位移而变化,当光栅中心在放电区中心轴线上时有最大的能量输出。光斑能量分布接近低阶模或基模分布。     

Wave-based analysis of dual acoustic black holes for anechoic termination of shock testing devices

Shock testing is an important issue for the survivability of an equipment under shock environment in aerospace and military industries. One of the problems faced in conventional shock testing devices is the need for redesigning of the geometry whenever the responses to different shock environments are tested. To circumvent the redesigning processes, a structure with two ‘acoustic black holes (ABHs)’ on both ends, referred to as the beam with dual ABHs, is proposed as a shock testing device. The beam with dual ABHs is capable of simulating diverse shock environments by controlling the applied force because it can be regarded as an infinite beam at high frequency range with the aid of the anechoic terminations by the ABHs. To systematically investigate the beam with dual ABHs, we develop a wave-based method that uses the reflection matrix of an ABH to perform free and forced vibration analyses. From the analyses on frequency response function and shock response spectrum of the beam with dual ABH, it is suggested that the beam with dual ABHs is feasible as a semi-permanent shock testing device.     

形状记忆合金椭圆孔口问题的有限单元法

基于Lagoudas形状记忆合金(SMA)三维本构模型,假设材料为各向同性,推导了SMA平面应力状态的增量型本构方程,继而编写了ABAQUS用户自定义材料(UMAT)子程序,研究了在双向拉伸情况下,外载荷、温度、椭圆孔口长短轴之比对超弹性SMA椭圆孔口板中应力诱发马氏体相变区的影响。数值结果表明:应力诱发马氏体相变首先发生在椭圆孔口长轴端点部位,在外加载荷作用下逐渐扩展到板内,并由内向外形成马氏体相区、相变混合区和奥氏体相区;SMA板内应力诱发马氏体完全相变区面积与施加外载荷成正相关,与温度成负相关;随着椭圆孔口长短轴之比增大,SMA板内应力诱发马氏体完全相变区面积呈现出先减小后增大的趋势;拉应力差值相同时,相较于拉应力沿椭圆孔口长轴方向较大的情况,当拉应力沿椭圆孔口短轴方向较大时,SMA板内完全相变区面积较大,椭圆孔口周边应力集中现象更明显。     

Entropy of higher-dimensional charged Gauss–Bonnet black hole in de Sitter space

The fundamental equation of the thermodynamic system gives the relation between the internal energy, entropy and volume of two adjacent equilibrium states. Taking a higher-dimensional charged Gauss–Bonnet black hole in de Sitter space as a thermodynamic system, the state parameters have to meet the fundamental equation of thermodynamics. We introduce the effective thermodynamic quantities to describe the black hole in de Sitter space. Considering that in the lukewarm case the temperature of the black hole horizon is equal to that of the cosmological horizon, we conjecture that the effective temperature has the same value. In this way, we can obtain the entropy formula of spacetime by solving the differential equation. We find that the total entropy contains an extra term besides the sum of the entropies of the two horizons. The corrected term of the entropy is a function of the ratio of the black hole horizon radius to the cosmological horizon radius, and is independent of the charge of the spacetime.     

对自由落体的诺维科夫时间与牛顿绝对时间关系讨论

文章首先将史瓦西黑洞场中自由下落质点的固有时(诺维科夫坐标时)公式,由自然单位制化成了国际单位制中的形式.然后,根据牛顿第二定律和万有引力定律,推导出了自由下落质点经历的绝对时间公式,进而证明了广义相对论中自由落体经历的固有时,恰好等于牛顿力学给出的绝对时间.最后,对自由下落质点在黑洞内外经历的时间进行了特例计算.     

Doublet bands at borders of A ≈ 130 island of chiral candidates: Case study of ~(120)I

Positive-parity doublet bands were reported in ~(120)I. Based on these, we discuss the corresponding experimental characteristics, including rotational alignment, and re-examine the corresponding configuration assignment.The self-consistent tilted axis cranking relativistic mean-field calculations indicate that the doublet bands are built on the configuration πh_(11/2)■νh_(11/2)~(-1). By adopting the two quasiparticles coupled with a triaxial rotor model, the excitation energies, energy staggering parameter S(I), B(M1)/B(E2), effective angles, and K plots are discussed and compared with available data. The obtained results support the interpretation of chiral doublet bands for the positive-parity doublet bands in ~(120)I, and hence identify this nucleus as the border of the A ≈ 130 island of chiral candidates.