Meta Junction Promoting Efficient Thermally Activated Delayed Fluorescence in Donor-Acceptor Conjugated Polymers

The meta junction is proposed to realize efficient thermally activated delayed fluorescence (TADF) in donor–acceptor (D-A) conjugated polymers. Based on triphenylamine as D and dicyanobenzene as A, as a proof of concept, a series of D-A conjugated polymers has been developed by changing their connection sites. When the junction between D and A is tuned from para to meta, the singlet–triplet energy splitting (ΔE_ST) is found to be significantly decreased from 0.44 to 0.10 eV because of the increasing hole–electron separation. Unlike the para-linked analogue with no TADF, consequently, the meta-linked polymer shows a strong delayed fluorescence. Its corresponding solution-processed organic light-emitting diodes (OLEDs) achieve a promising external quantum efficiency (EQE) of 15.4 % (51.9 cd A⁻¹, 50.9 lm W⁻¹) and CIE coordinates of (0.34, 0.57). The results highlight the bright future of D-A conjugated polymers used for TADF OLEDs.     

Ag3PO4量子点/石墨相氮化碳纳米片复合光催化剂的制备及其对苯甲醇选择性氧化活性

以热氧化剥离法得到的超薄石墨相氮化碳(g-C₃N₄)纳米片为载体,首次在室温条件下,制备了系列Ag₃PO₄量子点/g-C₃N₄纳米片复合光催化剂;通过透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)、X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、紫外-可见漫反射光谱(UV-Vis DRS)、荧光光谱(PL),对复合光催化剂的形貌、结构和光学性质进行了表征,考察了系列光催化剂对苯甲醇的光催化选择性氧化性能。 结果表明,粒径为3~5 nm Ag₃PO₄颗粒均匀分散g-C₃N₄纳米片上,结晶度良好。 以乙腈为溶剂时,当m(Ag₃PO₄)/m(g-C₃N₄)=0.6时,苯甲醇具有32.1%的最大转化率,对产物苯甲醛具有90%的最高选择性;活性物种捕捉实验结果表明,该催化氧化反应的主要活性物是光生空穴的氧化作用,能带计算结果表明,该复合催化剂结构具有合适的苯甲醇的氧化电位而选择性生成苯甲醛。     

Designing Hole Transport Materials with High Hole Mobility and Outstanding Interface Properties for Perovskite Solar Cells

Organic–inorganic halide perovskite solar cells (PSCs) have attracted much attention due to their rapid increase in power conversion efficiencies (PCEs), and many efforts are devoted to further improving the PCEs. Designing highly efficient hole transport materials (HTMs) for PSCs may be one of the effective ways. Herein we theoretically designed three new HTMs (FDT−N, FDT−O, and FDT−S) by introducing a nitrogen-phenyl group, an oxygen atom, and a sulfur atom into the spiro core of an experimentally synthesized HTM (FDT), respectively. And then we performed quantum chemical calculation to study their application potential. The results show that the devices with FDT−O and FDT−S instead of FDT may have higher open circuit voltages owing to their lower highest occupied molecular orbital (HOMO) energy levels. Moreover, FDT−S exhibits the best hole transport performance among the studied HTMs, which may be due to the significant HOMO-HOMO overlap in the hole hopping path with the largest transfer integral. Furthermore, the results on interface properties indicate that introducing oxygen and sulfur atoms can enhance the MAPbI₃/HTM interface interaction. The present work not only offers two promising HTMs (FDT−O and FDT−S) for PSCs but also provides theoretical help for subsequent research on HTMs.     

Organic electroluminescent device with aromatic amine-containing polymer as a hole transport layer (II): Poly(arylene ether sulfone)-containing tetraphenylbenzidine

Organic electroluminescent devices were fabricated using a poly(arylene ether sulfone)-containing tetraphenylbenzidine (PTPDES) and tris(8-quinolinolato)-aluminum(III) complex, Alq, as the hole transport layer and the electron-transporting emitter layer, respectively. A device structure of glass substrate/indium—tin oxide (ITO)/PTPDES/Alq/Mg : Ag was employed. Hole injection from ITO through the PTPDES layer to the Alq layer and concomitant electroluminescence from the Alq layer were observed. Bright green light with a luminance of 14,000 cd/m² was observed at a drive voltage of 14 V, indicating that the polymer possesses a high hole mobility and a high electron-blocking capability.     

ZnS作为空穴缓冲层的新型有机发光二极管

采用磁控溅射方法在ITO表面沉积了不同厚度的ZnS超薄膜作为有机发光二极管(OLEDs)的缓冲层,使典型结构(ITO/TPD/Alq3/Al)的OLEDs的发光性能得到改善。ZnS缓冲层厚度对器件性能影响的实验结果表明,当ZnS缓冲层厚度为5nm时,器件电流密度提高了近2倍,亮度提高了2倍;当ZnS缓冲层厚度为10nm时,器件发光的电流效率提高18%,器件的性能得到改善。宽禁带的ZnS缓冲层对空穴从阳极到有机功能层的注入有阻碍作用,促进器件载流子平衡,提高了器件发光效率,改善了器件性能。     

理论研究电流注入对垂直腔面发射激光器多横模行为的影响

从包含时空变量的速率方程出发,针对弱折射率导引垂直腔面发射激光器(VCSELs),利用空间积分法分析了典型电注入参数对VCSELs多横模行为的影响,在不降低模型准确性的前提下提高了仿真效率。仿真结果表明,注入盘孔径和注入环越小、注入强度越低以及电流扩散越弱时,VCSELs更易实现单横模工作;反之,VCSELs高阶横模开始出现并呈现较强的模式竞争,引发了载流子空间烧孔效应,并导致基模强度降低。进一步得出,在环形注入方式下,高阶模式更容易出现且彼此间的竞争较盘形注入时强。     

Wave-based analysis of dual acoustic black holes for anechoic termination of shock testing devices

Shock testing is an important issue for the survivability of an equipment under shock environment in aerospace and military industries. One of the problems faced in conventional shock testing devices is the need for redesigning of the geometry whenever the responses to different shock environments are tested. To circumvent the redesigning processes, a structure with two ‘acoustic black holes (ABHs)’ on both ends, referred to as the beam with dual ABHs, is proposed as a shock testing device. The beam with dual ABHs is capable of simulating diverse shock environments by controlling the applied force because it can be regarded as an infinite beam at high frequency range with the aid of the anechoic terminations by the ABHs. To systematically investigate the beam with dual ABHs, we develop a wave-based method that uses the reflection matrix of an ABH to perform free and forced vibration analyses. From the analyses on frequency response function and shock response spectrum of the beam with dual ABH, it is suggested that the beam with dual ABHs is feasible as a semi-permanent shock testing device.     

形状记忆合金椭圆孔口问题的有限单元法

基于Lagoudas形状记忆合金(SMA)三维本构模型,假设材料为各向同性,推导了SMA平面应力状态的增量型本构方程,继而编写了ABAQUS用户自定义材料(UMAT)子程序,研究了在双向拉伸情况下,外载荷、温度、椭圆孔口长短轴之比对超弹性SMA椭圆孔口板中应力诱发马氏体相变区的影响。数值结果表明:应力诱发马氏体相变首先发生在椭圆孔口长轴端点部位,在外加载荷作用下逐渐扩展到板内,并由内向外形成马氏体相区、相变混合区和奥氏体相区;SMA板内应力诱发马氏体完全相变区面积与施加外载荷成正相关,与温度成负相关;随着椭圆孔口长短轴之比增大,SMA板内应力诱发马氏体完全相变区面积呈现出先减小后增大的趋势;拉应力差值相同时,相较于拉应力沿椭圆孔口长轴方向较大的情况,当拉应力沿椭圆孔口短轴方向较大时,SMA板内完全相变区面积较大,椭圆孔口周边应力集中现象更明显。     

Entropy of higher-dimensional charged Gauss–Bonnet black hole in de Sitter space

The fundamental equation of the thermodynamic system gives the relation between the internal energy, entropy and volume of two adjacent equilibrium states. Taking a higher-dimensional charged Gauss–Bonnet black hole in de Sitter space as a thermodynamic system, the state parameters have to meet the fundamental equation of thermodynamics. We introduce the effective thermodynamic quantities to describe the black hole in de Sitter space. Considering that in the lukewarm case the temperature of the black hole horizon is equal to that of the cosmological horizon, we conjecture that the effective temperature has the same value. In this way, we can obtain the entropy formula of spacetime by solving the differential equation. We find that the total entropy contains an extra term besides the sum of the entropies of the two horizons. The corrected term of the entropy is a function of the ratio of the black hole horizon radius to the cosmological horizon radius, and is independent of the charge of the spacetime.