An Inexpensive Biosensor for Uric Acid Determination in Human Serum by Flow‐Injection Analysis

An inexpensive and easy to construct miniaturized biosensor is described for the determination of uric acid in biological fluids. The amperometric biosensor was prepared by using a carbon paste electrode prepared with uricase from Arthrobacter globiforms and tetracyanoquinodimethane as electron transfer mediator. When incorporated into a flow‐injection system it was enabled to perform 50 measurements/h of uric acid in the analytical range of 1–100 μmol dm^?3 with a relative standard deviation of 0.20% (n=14). The system was applied to human serum samples analysis providing good data correlation with those obtained by the reference spectrophotometric method. A linear relationship AM (μmol dm^?3)=1.02 (±0.05) SP (μmol dm^?3) ?0.12 (±0.13) was obtained evidencing the absence of significant error. The constructed biosensor was successfully used for at least four months (250 assays) with only a 13% of decrease in the enzymatic activity.     

聚酰胺修饰碳糊电极测定槲皮素的研究

用聚酰胺修饰碳糊电极在ｐＨ３６０的Ｂｒｉｔｏｎ－Ｒｏｂｉｎｓｏｎ缓冲溶液中，将槲皮素开路富集一定时间后，从０４５Ｖ（ｖｓ．Ａｇ／ＡｇＣｌ）向阴极化扫描至－０５５Ｖ获得Ｉ－Ｅ曲线。槲皮素的峰电位为０１８Ｖ。峰电流与槲皮素浓度在１０～４００μｍｏｌ／Ｌ范围内呈良好的线性关系。所拟定方法用于芦丁水解产物测定，结果满意。     

Perfluorinated anion-exchange polymer mercury film electrode for anodic stripping voltammetric determination of zinc(II): effect of model organic compounds

The determination of zinc ion (1-60 ng ml⁻¹) by anodic square-wave stripping voltammetry on an anion-exchange perfluorinated polymer Tosflex mercury film electrodes (TMFE) was evaluated. The detection limit was 0.1 ng ml⁻¹ Zn(II). The effect of various organic compounds (gelatin, albumin, starch, camphor, humic acid, Triton X-100, sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB)) is explored. The results indicate that due to the size-exclusion and ion-exchange properties of Tosflex film, the TMFE is considerably more resistant to organic interference than the bare mercury film electrode.     

Electrochemical grafting by reduction of 4-aminoethylbenzenediazonium salt: Application to the immobilization of (bio)molecules

We propose in this study a simple and rapid way to produce stable amino-derivatized conductive surfaces for the subsequent immobilization of (bio)molecules. This was achieved through the use of (4-aminoethyl)benzenediazonium salt (AEBD), which was immobilized on glassy carbon and gold electrodes by its electrochemical reduction. The presence of terminal grafted amino functions was evidenced with XPS by analyzing N1s core level. Besides this conventional surface characterisation, an electrochemical strategy is proposed here to evidence the presence of immobilized amines, in which the chemical reactivity of amines towards 2,4,6-trinitrobenzenesulfonic acid (TNBS) is used. Surface-bound TNBS served as an electrochemical marker and was detected by cyclic voltammetry. Additionally, pre-modified gold electrodes with amino functions can be derivatized with biomolecules such as glutathione (GSH). Glutathione attachment was evidenced by studying the electrochemical behaviour of ferri/ferrocyanide redox before and after its immobilization. The functionalized electrodes were then used for the detection of copper ions in neutral aqueous solutions.     

Glass and polymeric membrane electrodes for the measurement of pH in milk and cheese

While there is a considerable interest in the food industry in determining various analytes using ion-selective electrodes (ISEs), only few reports describe their use for direct measurements in food. In this study, the suitability of glass electrodes and ionophore-based solvent polymeric ISEs for the determination of pH in Process cheese, Cheddar cheese and milk was investigated. The liquid junction potential between a 3 M KCl bridge electrolyte and diluted as well as undiluted Process cheese was found to be negligible. Reference electrodes with ceramic plug and sleeve-type junctions performed well, although precautions needed to be taken to prevent plugging at the junctions. While the protein rennet casein posed no problems in pH measurements, the extraction of neutral lipophilic compounds or hydrophobic peptides into solvent polymeric membranes was evident, resulting in some loss of selectivity for monovalent cations upon exposure to cheese. However, it was found that ISEs based on tridodecylamine (R₃N) as ionophore and o-nitrophenyl octyl ether (oNPOE) as plasticizer can be used to accurately measure the pH of milk and, after desensitization of the electrodes in a cheese emulsion, of diluted Process cheese. Since pH measurements with a glass electrode showed that emulsions of cheese moderately diluted to a cheese content of 70% have the same pH as undiluted cheeses, it is possible to determine the pH in cheese with ionophore-based ISEs. R₃N membranes also performed well in undiluted milk.     

Voltammetric Behavior of Arsenic(III) in the Presence of Sodium Diethyl Dithiocarbamate and Its Determination in Water and Highly Saline Samples by Adsorptive Stripping Voltammetry

This paper describes the voltammetric behavior of As(III) at the hanging mercury drop electrode (HMDE) in the presence of sodium diethyl dithiocarbamate (SDDC) and a new voltammetric method for the determination of As(III) at trace levels. The method is based on the adsorptive deposition of a As(III) complex with SDDC at ?0.45 V (vs. Ag/AgCl) on the HMDE in acidic medium of 0.01 mol L^?1 HCl (pH 2.0) and its cathodic stripping during the potential scan (100 mV s^?1). The linear range for the determination of As(III) in the presence of SDDC (4 μmol L^?1) in water samples was between 1 and 10 μg L^?1 for a deposition time of 300 s (r=0.994) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.999). For the determination of As(III) in dialysis concentrate samples, the linear range was between 5 and 25 μg L^?1 for a deposition time of 180 s (r=0.992) and between 10 and 100 μg L^?1 for a deposition time of 60 s (r=0.996). Detection limits of 0.3 and 2.2 μg L^?1 in water and dialysis concentrate samples were calculated for the method using a deposition time of 300 and 180 s, respectively. Recovery values between 93.0 and 110.0% for As(III) added to deionized, mineral, seawater (synthetic and real) and dialysis concentrate samples prove the satisfactory accuracy and applicability of the procedure.     

粗糙化银电极上氰基钴胺素的电化学行为

比较研究氰基钴胺素在光滑和粗糙化银电极上的电化学行为，发现在光滑银电极上氰基钴胺素的还原为一个二电子过程，而在粗糙化银电极上则为两个一电子过程，其原因是由于粗糙化银电极对氰根的强吸附作用。     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Electroreduction of Pd(II) Complexes with α-Alanine on a Palladium Electrode

The kinetics of electroreduction of Pd(II) complexes with -alanine, Pd(ala)₂, is studied on a rotating Pd disk electrode in solutions of pH 8–13 containing large excess of -alanine and various supporting electrolytes (NaF, Na₂SO₄, NaClO₄). On a Pd electrode, complexes Pd(ala)₂ undergo reduction at potentials much more negative than on an Hg electrode. This is attributed to the chemisorption of water on the Pd electrode, which hampers adsorption of Pd(ala)₂ that take part in the slow electrochemical stage. As with the Hg electrode, perchlorate ions hinder the Pd(ala)₂ reduction on a Pd electrode. Studying adsorption of Pd(ala)₂ on a Pd electrode is hampered by parallel processes of hydrogen adsorption and absorption.