正交多载波降噪差分混沌键控通信系统

为解决多载波差分混沌移位键控(MC-DCSK)系统传输速率低和误码性能差的缺点,该文提出一种正交多载波降噪差分混沌移位键控(QMC-NR-DCSK)系统。在发送端,预定义载波用于发送参考信号,剩余M-1个不同中心频率的载波及其经正交调制技术后得到的频率相同但相位正交的载波都用于传输信息信号,此外,通过进一步引入Hilbert变换,将系统的频带利用率和传输速率提升为MC-DCSK系统的4倍。在接收端引入滑动平均滤波器的降噪操作降低了噪声的方差,从而改善了系统误码性能。推导了QMC-NR-DCSK系统在加性高斯白噪声(AWGN)信道和多径瑞利衰落(RFC)信道下的比特误码率公式并进行了仿真。仿真结果和理论分析表明：QMC-NR-DCSK系统能有效提升传输速率、带宽效率和误码性能,为该系统应用于多载波无线通信提供理论参考。     

The Enhancement of Efficiency of High-order Harmonic in Intense Laser Field Based on Asymptotic Boundary Conditions and Symplectic Algorithm

Asymptotic boundary condition (ABC) of laser-atom interaction presented recently is applied to transform the initial value problem of the time-dependent Schrödinger equation (TDSE) in infinite space into the initial and boundary value problem in the finite space, and then the TDSE is discretized into linear canonical equations by substituting the symmetry difference quotient for the 2-order partial derivative. The canonical equation is solved by symplectic algorithm. The ground state and the equal weight coherent superposition of the ground state and the first excited state have been taken as the initial conditions, respectively, while we calculate the population of bound states, the evolution of average distance and the high-order harmonic generation (HHG). The conversion efficiency of HHG can be enhanced by initial coherent superposition state and moderate laser intensities     

The Crystal Structure of Sr2TiSi2O8

Sr₂TiSi₂O₈ single crystals were grown by Czochralski pulling and from a high-temperature solution. X-ray diffractometry revealed the modulated crystal structure of Sr₂TiSi₂O₈ to belong to the 5D superspace group P4bm (−α, α, 1/2; α, α, 1/2) with α=0.3. Atomic positions, anisotropic displacement factors and positional modulation parameters for Sr₂TiSi₂O₈ are determined and discussed. The positional modulation is further investigated by electron diffraction and high-resolution transmission electron microscopy. In the latter experiments, the 2D modulation appears to be superimposed by some 1D modulation waves. This effect is discussed in terms of growth conditions.     

The Development of Gas-flow Modulation for High-frequency MTDSC measurements

The purpose of this study was to investigate the feasibility of modulating the temperature programme of a conventional DSC by use of an alternating gas-flow system. Modulated temperature differential scanning calorimetry (MTDSC) is an important thermal analysis technique but suffers from a limited applicable frequency range due to the mass of the sample and DSC cell leading to the impingement of thermal conductivity effects. We suggest that the frequency limit can be increased by replacing the cell as the source of temperature modulation with an external gaseous source, directed towards the sample and reference pans. In this evaluation, an alternating gas-flow was passed through a line to a forced gas-flow accessory (FGFA). The FGFA consisted of two matched cylinders containing chambers that allowed pre-temperature-equilibration of the stream of gas before it was passed over the sample and reference pans. The development of this device revealed the essential practical requirements of gas-flow modulation for high-frequency temperature modulation. These include the following: an appropriately sealed tunable gas supply to both sample and reference pans, an effective method for high-frequency cycling of the gas-flow rate, a small aperture to deliver the flowing gas directly over the pan and a temperature equilibration chamber. The results from samples of quenched PET and amorphous Saquinavir indicate that gas-flow modulation is indeed feasible, with the FGFA able to raise the attainable temperature modulation frequency by an order of magnitude compared to conventional MTDSC. This revised version was published online in August 2006 with corrections to the Cover Date.     

Enhancement of signal-to-noise level by synchronized dual wavelength modulation for light emitting diode fluorimetry in a liquid-core-waveguide microfluidic capillary electrophoresis system

The signal-to-noise level of light emitting diode (LED) fluorimetry using a liquid-core-waveguide (LCW)-based microfluidic capillary electrophoresis system was significantly enhanced using a synchronized dual wavelength modulation (SDWM) approach. A blue LED was used as excitation source and a red LED as reference source for background-noise compensation in a microfluidic capillary electrophoresis (CE) system. A Teflon AF-coated silica capillary served as both the separation channel and LCW for light transfer, and blue and red LEDs were used as excitation and reference sources, respectively, both radially illuminating the detection point of the separation channel. The two LEDs were synchronously modulated at the same frequency, but with 180°-phase shift, alternatingly driven by a same constant current source. The LCW transferred the fluorescence emission, as well as the excitation and reference lights that strayed through the optical system to a photomultiplier tube; a lock-in amplifier demodulated the combined signal, significantly reducing its noise level. To test the system, fluorescein isothiocyanate (FITC)-labeled amino acids were separated by capillary electrophoresis and detected by SDWM and single wavelength modulation, respectively. Five-fold improvement in S/N ratio was achieved by dual wavelength modulation, compared with single wavelength modulation; and over 100-fold improvement in S/N ratio was achieved compared with a similar LCW-CE system reported previously using non-modulated LED excitation. A detection limit (S/N = 3) of 10 nM FITC-labeled arginine was obtained in this work. The effects of modulation frequency on S/N level and on the rejection of noise caused by LED-driver current and detector were also studied.     

高次非球面光路计算中的两个重要问题

提出在高次非球面的光路计算中运用变曲率的“辅助球面”概念,对某些文献在此方面存在的问题进行分析,提出迭代逼近精度的数值判据及浮动处理方法。     

准数字示样DRFM对线性调频脉压雷达的干扰和仿真

传统的干扰信号通过线性调频雷达脉冲压缩处理后,能量损失严重,不能很好的完成干扰的任务.本文简述了DRFM的原理、分类和优缺点,提出准数字示样DRFM的干扰方式,分析这种方式对线性调频脉压雷达干扰的有效性并对此进行仿真.     

外腔长度对FBG-ECL输出特性的影响

根据光纤光栅外腔半导体激光器(FBG-ECL)的等效腔模型,讨论了外腔长度对FBG-ECL的调制特性、线宽以及强度噪声的影响.指出增大外腔长度可以使FBG-ECL具有很窄的线宽,非常适合应用在相干光通信系统中.同时发现,外腔长度的增大也将导致强度噪声、调制特性的恶化,外腔的选择对FBG-ECL应用在不同光通信系统中十分重要.     

瑞利衰落信道采用组合发射机SC/接收机 MRC的MQAM性能分析

日益增长的无线业务需求要求提高衰落信道上无线通信的频谱利用率.本文研究一种使用组合发射机SC/接收机MRC(SC/MRC)的MQAM方案,推导其在平坦瑞利衰落信道上的误符号率,分析无线信道时变特性对系统性能的影响.数值计算结果表明该组合空间分集方案可以通过调整发射天线和接收天线的数目来获得比传统接收机分集接收更大的分集增益.     

大口径光学元件波前调制PSD模拟分析

 使用PSD作为大口径光学元件表面加工质量的评价参数，针对不同的波前调制进行了初步的模拟计算，得到了不同调制频率和不同调制深度情况下的PSD曲线变化情况。当调制频率不同时，PSD曲线的突变部分会发生相应的频移，调制频率高则突变发生在空间频率较高的频段，同时PSD峰值不变。相对应调制深度不同时，PSD曲线的突变部份峰值发生变化，调制深度大则峰值大，与此同时峰值出现的位置不会发生变化。计算和分析结果表明PSD分析结果能够在频率域反应出元件表面受到的不同程度的调制信息。