三代像增强器用微通道板的改进与发展

简要说明了三代像增强器的特点，分析了微通道板的离子反馈形成机理，给出有效抑制离子反馈对光阴极造成伤害的2种方法，即一种是减少和清除微通道板的吸附气体，另一种是阻止反馈离子反馈到光阴极上。介绍了国外最新的三代像增强器，以及使用优化改进的高性能微通道板显著减薄甚至彻底去除微通道板离子反馈膜的方法，该方法能维持砷化镓光阴极足够长的工作寿命，还介绍了最新发展的体导电微通道板和硅微通道板。指出高可靠性无膜选通砷化镓像增强器技术的实现，不仅需要微通道板在抑制离子反馈方面取得突破，还需要砷化镓光阴极在耐受离子反馈能力上进一步提高，同时还要结合和拓展选通电源的应用。     

串扰耦合的低频分析有效性及阻抗特性研究

从传输线模型出发，分析了二平行直导线间串扰的低频模型有效性，得出允许3dB误差的条件下，低频模型在工程计算串扰中的电学短线和频率足够小的具体限值；同时分析了端接阻抗大小对串扰耦合的影响。对电磁兼容性中的串扰耦合的工程应用有实际指导和参考意义。     

柱形分布的电荷产生的电势

将无限长线电荷看成二维平面上的一个“源”,利用电势叠加原理计算了无限长柱形均匀分布的电荷产生的电势.这些柱体的截面电荷分布包括可解析表示和不可求解表示两种,后者可以通过数值计算给出结果.因此这种方法实际上可以计算任意截面柱形电荷分布的电势.通过计算,展示了各种电荷分布所产生电场的特性和共同特征.     

离子辐照引起的金属／绝缘体界面混合与相变研究

载能离子穿过固体界面引起界面原子迁移使界面原子混合和物质成分变化，从而导致界面发生材料相变。简要介绍了载能离子辐照引起金属／绝缘体界面混合效应及相变现象的主要实验研究进展、低能离子和高能离子辐照引起金属／绝缘体界面现象差异，并对离子辐照引起界面混合及相变的机制进行了初步探讨。When penetrating an interface between two kind of solids, energetic ions can induce atomic diffusion at both sides of the interface and then result in intermixing, atom re-distribution or composition change, as well as phase transformation. Main progress on the study of intermixing and phase change at metal/insulator interface induced by energetic ion irradiations, the difference of phenomena occurred at metal/insulator interfaces induced by high-and low-energy ions were briefly reviewed. Furthermore, the possible mechanisms related to intermixing and phase change at metal/insulator interface produced by energetic ion irradiations were also discussed in short words.     

DESIGN OF A NOVEL 2-D UNIPLANAR CRLH-TL STRUCTURE

A novel uniplanar 2-D composite right/left-handed transmission line (CRLH-TL) structure is proposed based on a general transmission line theory and the way to increase the relative operating bandwidth in the left-handed (LH) region and lower the LH operating frequency is illustrated. In addition, a new method to extract parameters and calculate the Bloch impedance of the structure is presented. Numerical results of the dispersion as well as the extracted parameters are given, which are calculated based on full-wave simulation. The present 2-D uniplanar CRLH-TL structure is applicable to 2-D left-handed materials in lower and wider LH frequency range. Supported by the National Natural Science Foundation of China (No. 60371010) (No. 60471037) (No. 63531020)     

Technique for Monolithic Fabrication of Microlens Arrays Integrated with Infrared CCD

Based on scalar diffraction theory, 8-phase-level 256×256 elements diffractive microlens array with element dimension of 50×33 μm2 have been fabricated on the back-side of PtSi(3～5 μm) infrared CCD. The measurement results indicated that the ratio of the signal-to-noise of the infrared CCD with microlens was increased by a factor of 2.8.     

ToF-SIMS analysis of a fluorocarbon-grafted PET with a gold cluster ion source

Cluster ions have been recognized as a superb primary species in time of flight secondary ion mass spectroscopy (ToF-SIMS) compared with monatomic primary ions, as they significantly enhance the secondary ion yields from bulk samples. Self-assembled monolayers provide an important system for studying the fundamental mechanism involved in the yield enhancement.We used a gold cluster ion source to analyze a new type of self-assembled monolayer: a fluorocarbon-grafted polyethylene terephthalate. In addition to the structure details, which helped to understand the grafting mechanism, ToF-SIMS analysis revealed that fluorocarbon secondary ion yield enhancements by cluster ions were due to the enhanced sputter efficiency. A larger information depth may also be expected from the enhancement. Both mathematical definitions of damage cross-section and disappearance cross-section were revisited under a new context. Another cross-section parameter, sputter cross-section, was introduced to differentiate the beam induced sputter process from damage process.     

用离子速度影象技术研究n-C4H9Br的光解

利用离子速度影象技术研究了正一溴丁烷(n-C4H9Br)在231~267 nm波段的光解,得出了如下结论:正一溴丁烷(n-C4H9Br)在231~267 nm波段的吸收源于基态到三个最低激发态的跃迁,这三个激发态标识为1A″、2A′和3A′;发生在这三个排斥态的势能面(PES)上的光解最终导致C4H9 Br(2P3/2)或C4H9 Br*(2P1/2)的产生;2A′和3A′态之间存在避免交叉(Avoided crossing)会影响最终的光解产物;从基态1A′到激发态1A″的跃迁矩垂直于对称面,也就垂直于C-Br键;从基态1A′到激发态3A′的跃迁矩平行于对称面,同时平行于C-Br键;从基态1A′到激发态2A′的跃迁矩在对称面内,且与C-Br键成53.1°夹角.我们也讨论了正一溴丁烷(n-C4H9Br)在234 nm和267 nm附近光解时的避免交叉几率(Avoided crossingprobability),以及它对单通道相对产额(Relative fraction of the individual pathways)的影响.     

40Ar+诱导无定形碳到金刚石纳米晶相变的研究

通过60 keV的⁴⁰Ar⁺辐照无定形碳靶合成了大量尺寸不同的金刚石纳米颗粒.高分辨透射电子显微镜配合能量色散X射线谱和电子衍射以及Raman谱分析的结果表明，这些嵌于具有扰动石墨结构薄膜中的纳米金刚石颗粒，其成核率很高(约为10¹³/cm²)，而且可以生长到较大的尺寸，有的甚至可以达到微米量级.对其相转变过程也进行了初步探讨. 关键词： 离子束 金刚石纳米晶 相变 透射电子显微镜     

低速高电荷态离子40Ar16+与云母表面作用中的电子发射研究

报道了由兰州ECR源提供的低速高电荷离子40Ar16 入射到云母表面产生的电子发射的实验测量结果.结果发现,电子发射产额Y与离子入射角ψ有近似1/tanψ的关系.基于经典过垒模型,我们对这一关系进行了理论分析.实验结果和理论结果相当符合,这就间接说明势能电子发射是低速高电荷态离子作用于表面发射电子的一个主要途径.