改进实验仪器测量Bi／Ag线材的超导转变温度

对实验室现有的仪器进行改进并测量了Bi／Ag高温超导线材的Tc，结果为104．1K。     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

Hydrothermal formation of tobermorite studied by in situ X‐ray diffraction under autoclave condition

Hydrothermal formation of tobermorite from a pre‐cured cake has been investigated by transmission X‐ray diffraction (XRD) using high‐energy X‐rays from a synchrotron radiation source in combination with a newly designed autoclave cell. The autoclave cell has a large and thin beryllium window for wide‐angle X‐ray diffraction; nevertheless, it withstands a steam pressure of more than 1.2 MPa, which enables in situ XRD measurements in a temperature range of 373 to 463 K under a saturated steam pressure. Formation and/or decomposition of several components has been successfully observed during 7.5 h of reaction time. From the intensity changes of the intermediate materials, namely non‐crystalline C–S–H and hydroxylellestadite, two pathways for tobermorite formation have been confirmed. Thus, the newly developed autoclave cell can be used for the analyses of reaction mechanisms under specific atmospheres and temperatures.     

基于频率选择和高仰角天线的通信盲区解决方案

针对工作实践中遇到的短波通信盲区问题,分析了盲区产生的原因,提出了两种解决盲区问题的途径,并阐述了可行性,并给出了在工程应用中通过选用较低频率和高仰角天线来解决短波通信盲区问题的具体方法,从而有效解决了模拟系统短波通信的盲区问题。     

LTE室分高倒流小区解决方案的研究

LTE室分高倒流直接影响室内4G用户的感知，同时较大程度拉低LTE网络驻留率指标。由于室内无线环境的封闭性，室分小区之间的覆盖独立性，仅仅通过参数调整的手段达到降低高倒流的效果非常不明显，因此本文针对目前影响室内用户感知的高倒流问题，从高倒流小区的标准出发，对室分高倒流小区的发现手段，产生原因及解决方案进行详尽地阐述，并针对各类型的高倒流情形提出解决方法，最终提供读者发现、分析及解决室分高倒流小区的有效方案，从而作为研究方法提供给LTE室内小区高倒流问题解决的指导意见     

Development of a highly sensitive high‐performance thin‐layer chromatography method for the screening and simultaneous determination of sofosbuvir,daclatasvir, and ledipasvir in their pure forms and their different pharmaceutical formulations

The combination of sofosbuvir and daclatasvir or sofosbuvir and ledipasvir is now widely used as an ideal treatment for hepatitis C virus infection. For this purpose, a simple, sensitive, accurate, economic, and precise high‐performance thin‐layer chromatography was developed and validated for the determination of sofosbuvir, daclatasvir, and ledipasvir in their pure form as well as their different pharmaceutical products. The method used Merck high‐performance thin‐layer chromatography aluminum plates precoated with silica gel 60 F254 as a stationary phase and mobile phase consisting of methylene chloride/methanol/ethyl acetate/ammonia (25%) (6:1:4:1, v/v/v/v). This system was found to give compact symmetric peaks of sofosbuvir, daclatasvir, and ledipasvir with retardation factors of 0.27 ± 0.01, 0.50 ± 0.007, and 0.68 ± 0.008, respectively. The densitometric scanner was set at 275 nm using a deuterium lamp. The calibration curves were linear over the range of 100–3000 ng/spot for sofosbuvir, and daclatasvir, and range of 50–3000 ng/spot for ledipasvir. The detection limits were 22.5, 31.90, and 15.80 for sofosbuvir, daclatasvir, and ledipasvir. The quantitation limits were 67.50, 95.60, and 47.50 for sofosbuvir, daclatasvir, and ledipasvir. The proposed method was validated according to International Conference on Harmonization (ICH) guidelines and the results were acceptable.     

求解Schrdinger方程的高阶紧致差分格式

基于Richardson外推法提出了一种求解Schrdinger方程的高阶紧致差分方法.该方法首先利用二阶微商的四阶精度紧致差分逼近公式对原方程进行求解,然后利用Richardson外推技术外推一次,得到了Schrdinger方程具有O(r~4+h~4)精度的数值解.通过Fourier分析方法证明了该格式是无条件稳定的.数值实验验证了该方法的高阶精度及有效性.