Synthesis of furan dimer‐based polyamides with a high melting point

Polyamide composed of furan dimer, which is prepared from biomass‐derived organic molecule 2‐furfural, is synthesized. The reaction of 2,2′‐furan dimer 5,5′‐dicarbonyl chloride with several 1,ω‐diamines was carried out with a solution or interfacial polycondensation leading to the corresponding polyamide. Measurement of the melting point was performed resulting to exhibit a higher temperature compared with the related polyamide bearing a single furan ring composed of furan‐2,5‐dicarboxylic acid (FDCA). Thermal analyses (TG–DTA) also indicated higher temperatures of decomposition than those of FDCA‐derived polyamide. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1516–1519     

Antimicrobial and anticancer activities of Schiff base ligand and its transition metal mixed ligand complexes with heterocyclic base

A new Schiff base ligand (HL) was prepared via a condensation reaction of quinoline‐2‐carboxaldhyde with 2‐aminophenol in a molar ratio of 1:1. Its transition metal mixed ligand complexes with 1,10‐phenanthroline (1,10‐phen) as co‐ligand were also synthesized in a 1:1:1 ratio. HL and its mixed ligand complexes were characterized using elemental analysis, infrared, ¹H NMR, mass and UV–visible spectroscopies, molar conductance, magnetic measurements, solid reflectance, thermal analysis, electron spin resonance and X‐ray diffraction. Molar conductance measurements showed that all complexes have an electrolytic nature, except Cd(II) complex. From elemental and spectral data, the formulae [M(L)(1,10‐phen)(H₂O)]Cl_x?nH₂O (where M = Cr(III) (x = n = 2), Mn(II) and Ni(II) (x = 1, n = 2), Fe(III) (x = n = 2), Co(II), Cu(II) and Zn(II) (x = 1, n = 2)) and [Cd(L)(1,10‐phen)Cl]?3H₂O for the metal complexes have been proposed. The geometric structures of complexes were found to be octahedral. Powder X‐ray diffraction reflected the crystalline nature of the complexes; however, the Schiff base is amorphous. HL and its mixed ligand complexes were screened against Gram‐positive bacteria (Streptococcus pneumoniae and Bacillus subtilis) and Gram‐negative bacteria (Pseudomonas aeruginosa and Escherichia coli). Antifungal activity was determined against Aspergillus fumigatus and Candida albicans, the data showing that most complexes had activity less than that of the Schiff base while Mn(II), Fe(III) and Ni(II) complexes showed no significant antifungal activity. The anticancer activity of HL and its metal complexes was also studied against breast and colon cell lines. The metal complexes showed IC₅₀ higher than that of HL, especially the Cu(II) complex which showed the highest IC₅₀ against breast cell line.     

Synthesis and nanoimprinting of high refractive index and highly transparent polythioethers based on thiol-ene click chemistry

This work demonstrates the UV nanoimprinting lithography (UV-NIL) of high refractive index and highly transparent polythioethers based on thiol-ene click chemistry. Herein, 9,9-bis(3-mercaptopropylphenylether)fluorene (BMPF) is designed as a new thiol monomer with a high refractive index, high transparency, and good processability for UV-NIL. Colorless polythioethers are synthesized from BMPF and ene monomers under mild thiol-ene click reaction conditions. Excellent transmittance (96%) of 400 nm light is observed in all the polymer films and high refractive index values of 1.5972–1.6382 are attained. UV-NIL using thiol-ene photopolymerization affords polymer nanoimprinting patterns with various features on the order of 100–500 nm without any fractures. To the best of our knowledge, this is the first report on UV-NIL of high refractive index and highly transparent polymers. Through proper monomer and polymer design, novel polythioethers with suitable glass transition temperature (T _g) values are developed with high refractive index, high transparency, and good UV-NIL processability. Furthermore, UV-NIL based on thiol-ene click chemistry is accomplished at the nanoscale. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2175–2182     

Convergence issues in using high‐resolution schemes and lower–upper symmetric Gauss–Seidel method for steady shock‐induced combustion problems

This paper reports numerical convergence study for simulations of steady shock‐induced combustion problems with high‐resolution shock‐capturing schemes. Five typical schemes are used: the Roe flux‐based monotone upstream‐centered scheme for conservation laws (MUSCL) and weighted essentially non‐oscillatory (WENO) schemes, the Lax–Friedrichs splitting‐based non‐oscillatory no‐free parameter dissipative (NND) and WENO schemes, and the Harten–Yee upwind total variation diminishing (TVD) scheme. These schemes are implemented with the finite volume discretization on structured quadrilateral meshes in dimension‐by‐dimension way and the lower–upper symmetric Gauss–Seidel (LU–SGS) relaxation method for solving the axisymmetric multispecies reactive Navier–Stokes equations. Comparison of iterative convergence between different schemes has been made using supersonic combustion flows around a spherical projectile with Mach numbers M = 3.55 and 6.46 and a ram accelerator with M = 6.7. These test cases were regarded as steady combustion problems in literature. Calculations on gradually refined meshes show that the second‐order NND, MUSCL, and TVD schemes can converge well to steady states from coarse through fine meshes for M = 3.55 case in which shock and combustion fronts are separate, whereas the (nominally) fifth‐order WENO schemes can only converge to some residual level. More interestingly, the numerical results show that all the schemes do not converge to steady‐state solutions for M = 6.46 in the spherical projectile and M = 6.7 in the ram accelerator cases on fine meshes although they all converge on coarser meshes or on fine meshes without chemical reactions. The result is based on the particular preconditioner of LU–SGS scheme. Possible reasons for the nonconvergence in reactive flow simulation are discussed.Copyright © 2012 John Wiley & Sons, Ltd.     

Crystallographic Studies of Clathrate Hydrates. Part I

Low-temperature neutron and X-ray diffraction studies show the gas hydrates of oxygen and nitrogen to be structure II (Fd3m), as recently found also for the hydrates of the small argon and krypton molecules. New lattice parameters of three structure I and 14 structure II hydrates from powder X-ray diffraction at 170 K are reported. The thermal expansion coefficient of tetrahydrofuran hydrate was determined from X-ray diffraction at some 50 temperatures between 18 and 263 K and found to be three times as great as for ice near 100 K and 30% higher near 250 K. Lattice parameters qf 40 type II clathrate hydrates are compared at 0°C and found to lie within 0.10 Å of 17.30 Å.     

Ultra‐high pressure LC for astaxanthin determination in shrimp by‐products and active food packaging

Nowadays, there is increasing interest in natural antioxidants from food by‐products. Astaxanthin is a potent antioxidant and one of the major carotenoids in crustaceans and salmonids. An ultra‐high pressure liquid chromatographic method was developed and validated for the determination of astaxanthin in shrimp by‐products, and its migration from new packaging materials to food simulants was also studied. The method uses an UPLC® BEH guard‐column (2.1 × 5 mm, 1.7 µm particle size) and an UPLC® BEH analytical column (2.1 × 50 mm, 1.7 µm particle size). Chromatographic separation was achieved using a programmed gradient mobile phase consisting of (A) acetonitrile–methanol (containing 0.05 m ammonium acetate)–dichloromethane (75:20:5, v/v/v) and (B) ultrapure water. This method was evaluated with respect to validation parameters such as linearity, precision, limit of detection, limit of quantification and recovery. Low‐density polyethylene films were prepared with different amounts of the lipid fraction of fermented shrimp waste by extrusion, and migration was evaluated into food simulants (isooctane and ethanol 95%, v/v). Migration was not detected under the tested conditions. Copyright © 2012 John Wiley & Sons, Ltd.     

High‐performance liquid chromatographic enantioseparation of (RS)‐bupropion using isothiocyanate‐based chiral derivatizing reagents

A high‐performance liquid chromatographic (HPLC) method for enantioseparation of bupropion was developed using two isothiocyanate‐based chiral derivatizing reagents, (S)‐1‐(1‐naphthyl) ethyl isothiocyanate, (S)‐NEIT, and (R)‐α‐methyl benzyl isothiocyanate, (R)‐MBIT. The diastereomers synthesized with (S)‐NEIT were enantioseparated by reversed‐phase HPLC using gradient elution with mobile phase containing water and acetonitrile, whereas diastereomers synthesized with (R)‐MBIT were enantioseparated using triethyl amine phosphate buffer and methanol. Derivatization conditions were optimized and the method was validated for accuracy, precision and limit of detection. The limit of detection was found to be 0.040–0.043 µg/mL for each of the diastereomers prepared with (S)‐NEIT. Copyright © 2013 John Wiley & Sons, Ltd.     

Quantitative determination of sodium stearyl fumarate in a tablet formulation from continuous manufacturing using a high-pH reversed-phase HPLC method

This study demonstrates the first use of a reversed-phase (RP) high-performance liquid chromatography method with a high-pH buffer for the analysis of sodium stearyl fumarate (SSF) from a tablet formulation. After examining the retention time and peak shape using various buffer concentrations, buffer pH, and RP stationary phases, an optimized method was established using the XBridge® BEH C18 at high pH. This column was further evaluated for method specificity, accuracy, precision, linearity, stability, and sensitivity. Finally, the method was successfully used as a convenient and robust analytical procedure to accurately quantitate SSF in stratified tablets from a continuous manufacturing process to confirm the excipient uniformity throughout the process.     

Interference of Transformer oil Matrices to the Internal Standards on PCB Quantification

Abstract

Polychlorinated biphenyls (PCBs) are toxic, perssstent, global environmental contaminants which were formulated as complex mixtures of congeners. Many methods have been developed in the past to analyze PCB in transformer oil samples for regulatory purposes. The most important consideration in the cleanup procedure is the ability to remove the oil from the sample matrix, since trace amount of oil will interfere with the subsequent GC-MS analysis. Electron capture detection (ECD) has been the most common method for gas chromatographic analysis of PCBs because of its high sensitivity toward halogenated compounds. ECD can also respond to some non-PCB compound resulting in biased concentrations of PCB. In this work, a two-stage cleanup method, using DMSO liquid/liquid extraction and HPLC column chromatography. has been applied to two types of transformer oil. Five internal standards have been selected to show their performance in the presence of different oil matrices. The comparison of the PCB quantification at different conditions for GC-MS and GC-ECD will be demonstrated.