Effects of hydrogen flux on the properties of Al-doped ZnO films sputtered in Ar + H2 ambient at low temperature

Al-doped ZnO (AZO) transparent conductive thin films were grown by magnetron sputtering with AZO (98 wt.% ZnO, 2 wt.% Al₂O₃) ceramic target in Ar + H₂ ambient at a relatively low temperature of 100 °C. To investigate the dependence of crystalline and properties of as-grown AZO films on the H₂-flux, X-ray diffraction (XRD), X-ray photoemission spectrometer (XPS), Hall and transmittance spectra measurements were employed to analyze the AZO samples deposited with different H₂-flux. The results indicate that H₂-flux has a considerable influence on the transparent conductive properties of AZO films. The resistivity of 4.15 × 10⁻⁴ Ω cm and the average transmittance of more than 94% in the visible range were obtained with the optimal H₂-flux of 1.0 sccm. Such a low temperature growing method present here may be especially useful for some low-melting point photoelectric devices and substrates.     

低场磁共振系统的低噪声前置放大器研究设计

噪声前置放大器是磁共振射频接收子系统中的重要组件,它的性能优劣直接决定了最终磁共振图像的好坏.目前市场上的低噪声前置放大器大多基于中高场磁共振系统开发,而针对低场磁共振系统的很少;另外,商用低场磁共振系统的低噪声前置放大器价格相对较贵,并且多采用两级放大结构,结构复杂、调试难度大、成本相对较高.在此背景下,针对0.5 T低场磁共振设备利用Keysight公司的先进设计系统（ADS）软件对低噪声前置放大器进行研究设计,采用一级放大结构,探索电路设计与布局对放大器性能的影响.实测结果表明自主设计的低噪声前置放大器在21 MHz共振频率附近噪声系数为0.5 dB左右,增益达到了30 dB,能够满足低场磁共振应用的要求.     

250 kV，1 MHz重复率方波三脉冲源

阐述了一种新的实现高功率高重复率方波脉冲源的技术途径,利用高压快恢复整流硅堆把三个独立的方波脉冲合成为一个MHz重复率的方波三脉冲。通过合理的串并联设计,可以提高硅堆在高频脉冲下的反向耐压,并使硅堆通过的正向脉冲电流达到kA量级。方波三脉冲源输出指标达到了电压250 kV,脉冲电流10 kA,峰值功率2.5 GW,重复率1 MHz,脉冲上升时间约40 ns,脉冲平顶宽度50 ns。     

One-step solution synthesis of Fe2O3 nanoparticles at low temperature

A new synthesis method of α-Fe₂O₃ nanoparticles was developed, in which the ferrous and ferric salts as well as polyaniline acted as the precursor and dispersant, respectively. From the investigation of X-ray diffraction and FT-IR spectra, the α-Fe₂O₃ nanoparticles can be directly prepared by the co-precipitation method without high-temperature calcining. Transmission electron microscope (TEM) and scanning electron microscope (SEM) observation revealed that the α-Fe₂O₃ nanoparticles had average diameters ranging from 30.0 to 75.0 nm. Compared with previous methods, this present method shows an easy processing and can be applied on the large-scale produce of α-Fe₂O₃ nanoparticles in one step.     

Creep deformation measurement using quartz optical fiber

This paper describes an optical system for high temperature creep strain measurement using quartz optical fiber, super long working distance microscope and digital image processing techniques. In this system one end of the quartz optical fibers is arrayed in a small area on the specimen surface and the other end is illuminated by a laser beam. The fiber ends on the specimen surface form the spot array. The small optical spots on the specimen are tracked by a CCD camera and the images are processed by digital image processing software. The diameter of each quartz fiber is 100 μm and the fibers can be arrayed in a small area. The local strains are determined by measuring the variety of relative distance between two spots. Experimental results of local creep strain on the welding joints of 15CrMo and HK40 at 850°C are obtained.     

等电子谱线法测量Mg/Al等离子体电子温度空间分布

在“星光Ⅱ”激光装置上对Mg/Al混合材料埋点靶进行三倍频激光打靶实验,用空间分辨晶体谱仪测量靶材料发射的X光光谱,获取了示踪离子谱线实验数据。采用多组态Dirac-Fock方法计算所需原子参数,并在局域热动平衡条件下建立了双示踪离子谱线强度比随电子温度的变化关系。在此基础上由双示踪元素等电子谱线法确定了Mg/Al混合材料埋点靶激光等离子体电子温度空间分布。     

一种新型的单色高亮度LED物屏

本介绍一种新型的单色LED物屏。该物屏具有成像清晰、造价低廉、制作方便的特点。     

Transverse Wave Propagation in Relativistic Two-Fluid Plasmas around Reissner–Nordström Black Hole

We investigate transverse electromagnetic waves propagating in a plasma influenced by the gravitational field of the Reissner–Nordström black hole. Applying 3+1 spacetime split we reformulate the relativistic two-fluid equations to take account of gravitational effects due to the event horizon and describe the set of simultaneous linear equations for the perturbations. Using a local approximation we investigate the one-dimensional radial propagation of Alfvén and high frequency electromagnetic waves. We derive the dispersion relation for these waves and solve it for the wave number k numerically.     

Thermal analysis and water-cooling design of the CSNS MEBT 324 MHz buncher cavity

At least two bunchers are needed in the 3 MeV H- Medium Energy Beam Transport(MEBT)line located between RFQ and DTL for the CSNS(China Spallation Neutron Source).A nose-cone geometry has been adopted as the type of buncher cavity for its simplicity,higher impedance and lower risk of multipacting.By making use of the results got from the simulations on the buncher with two-dimension code SUPERFISH,the thermal and structural analyses have been carried out,the process and results to determine the resulting frequency shift due to thermal and structural distortion of the cavity are presented,the water-cooling channel position and the optimum cooling water temperature as well as the tuning method by adjusting the cooling water temperature when the cavity is out of resonance are also determined through the analyses.