MgO films grown on yttria-stabilized zirconia by molecular beam epitaxy

MgO films were grown on (0 0 1) yttria-stabilized zirconia (YSZ) substrates by molecular beam epitaxy (MBE). The crystalline structures of these films were investigated using X-ray diffraction and transmission electron microscopy. Growth temperature was varied from 350 to 550 °C, with crystalline quality being improved at higher temperatures. The MgO films had a domain structure: (1 1 1)[1 1 2¯]_MgO(0 0 1)[1 0 0]_YSZ with four twin variants related by a 90° in-plane rotation about the [1 1 1]_MgO axis. The observed epitaxial orientation was compared to previous reports of films grown by pulsed laser deposition and sputtering and explained as resulting in the lowest interface energy.     

Working group report: Neutrino and astroparticle physics

This is the report of neutrino and astroparticle physics working group at WHEPP-7. Discussions and work on CP violation in long baseline neutrino experiments, ultra high energy neutrinos, supernova neutrinos and water Cerenkov detectors are discussed.     

A new cytotoxic limonoid from Odontadenia macrantha from the Suriname rainforest

Bioassay‐guided fractionation of the methanol extract of Odontadenia macrantha afforded a new limonoid, odontadenin A (1) and two known triterpenoids, lupeol (2) and α‐amyrin (3). The structure of 1 was established on the basis of 1D and 2D NMR and high‐resolution fast atom bombardment mass spectrometric data. The new compound was found to possess moderate cytotoxicity against A2780, the ovarian cancer cell line. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis and characterization of wholly aromatic poly(azomethine)s containing donor–acceptor triphenylamine moieties

N‐(4‐nitrophenyl)‐4′,4″‐bisformyl‐diphenylamine was synthesized from N‐(4‐nitrophenyl)‐diphenylamine by the Vilsmeier‐Haack reaction. Soluble aromatic poly(azomethine)s (PAMs) were prepared by the solution polycondensation of N‐(4‐nitrophenyl)‐4′,4″‐bisformyl‐diphenylamine and aromatic diamine in N‐methyl‐2‐pyrrolidone (NMP) at room temperature under reduced pressure. All the PAMs are highly soluble in various organic solvents, such as N,N‐dimethylacetamide (DMAc), chloroform (CHCl₃), and tetrahydrofuran (THF). Differential scanning calorimetry (DSC) indicated that these PAMs had glass‐transition temperatures (T_gs) in the range of 170–230 °C, and a 10% weight‐loss temperatures in excess of 490 °C with char yield at 800 °C in nitrogen higher than 60%. These PAMs in NMP solution showed UV‐Vis charge‐transfer (CT) absorption at 405–421 nm and photoluminescence peaks around 462–466 nm with fluorescence quantum efficiency (Φ_F) 0.10–0.99%. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of these PAMs can be determined from cyclic voltammograms as 4.86–5.43 and 3.31–3.34 eV, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4921–4932, 2007     

一种高抗干扰的DSP输入输出信号传输电路的设计

介绍和比较了现有的DSP输入输出信号传输方法,设计了一种高抗干扰的DSP输入输出信号传输电路,论述了该电路工作原理,给出了电路主要参数的设计计算。通过实验验证了该传输电路的可行性。     

用于高数值孔径物镜的可调光瞳滤波器

根据矢量衍射理论，提出了一种用于提高高数值孔径显微物镜纵向分辨率的可调二元环形光瞳滤波器，通过改变滤波器的环半径获得不同的纵向分辨率，并利用共焦显微术点扩散函数的乘积性大大地降低了旁瓣相对主瓣的比值。模拟结果表明，这种新型滤波器不仅可以提高高数值孔径物镜的纵向分辨率，同时基本上不影响横向分辨率。     

提高YBCO块材在外磁场中悬浮力

本给出了三种提高YBCO块材在外磁场中悬浮力的方法．第一种方法是增强外磁场，对于此方法，本研究了一块直径为30mm的圆柱状YBCO块材分别在圆柱状NdFeB永磁体和NdFeB永磁导轨上的悬浮力．测量结果表明在77K温度下YBCO块在圆柱状NdFeB永磁体上的最大悬浮力为50N，在NdFeB永磁导轨上的最大悬浮力为103．ON．第二种方法是提高YBCO块材自身的性能，包括临界电流密度、俘获磁通和块材尺寸，对于此方法，本仅研究了块材尺寸对悬浮力的影响．三块直径分别为30mm、35mm、40mm的圆柱状YBC0块材在NdFeB永磁导轨上的悬浮力被测量，77K温度下5mm悬浮间距时的悬浮力分别为103．ON、134．5N、175．ON．第三方法是将YBCO块材变成准永久磁体，此种情况下，直径为40mm的圆柱状YBCO块材在77K温度下5mm悬浮间距时的悬浮力高达218．3N．     

高厚径比盲孔电镀

盲孔能够大大的增加板的密度,从而减小板面积。介绍了有关高厚径比盲孔电镀的有关工艺,从激光钻孔、金属化孔和电镀几个方面对孔径4mil以上的盲孔电镀进行了研究。     

13N的一个可能的类晕的质子2p态

假设¹³N是单粒子的2p态的结构,用Glauber多重散射理论计算了1GeV的质子在¹³N上弹性散射的微分截面,研究了¹³N的类晕结构.与¹³C的情况不同,虽然目前还没有关于p-¹³N弹性散射微分截面的实验材料与我们的理论结果相比较,但是这个理论结果可以作为对未来的实验测量工作的一个指导,特别是对兰州近代物理研究所的晕核实验研究工作有参考和指导价值.参照先前我们对¹³C晕核结构的理论预言和进而的实验证实,本文的计算结果清楚地表明:¹³N可能存在着一个类晕的质子皮结构.因此,实验上测量p-¹³N弹性散射的微分截面就是当前需要马上进行的一个实验研究工作.     

CsBr高压X光研究

 采用同步辐射X光源和能散法，对CsBr粉末样品进行高压原位X光衍射实验。由金刚石对顶压砧高压装置（DAC）产生高压，用已知状态方程的Pt粉末作内标，由Pt的衍射数据确定样品压力，最高压力达64.4 GPa。实验结果表明：室温常压下原始CsBr样品是具有简单立方结构的晶体，其晶格常数α＝0.428 5 nm。高压下CsBr的结构有所变化，在51.3~58.4 GPa的压力范围内，(110)线和(211)线发生劈裂，从而形成了四方相。