Indirect thermal lens detection for capillary electrophoresis

Thermal lens detection with a 325.0 nm He-Cd excitation laser is used for thermooptical indirect detection in combination with the capillary electrophoretic separation of organic anions. The optimization of indirect thermooptical detection is discussed. With Mordant Yellow 7 (an azo dye) chosen as a probe ion limits of detection for 1-heptane-, 1-pentane-, 1-butane-, 1-propanesulfonic, and acetic acid at a level of n × 10⁻⁷ M were achieved with a separation electrolyte containing 50 μM of the probe ion and 5 mM Tris pH 9.90. A further increase in the detection sensitivity (twofold decrease in the limit of detection ) was obtained with a separation electrolyte containing a volume fraction of 20% acetonitrile.     

Optimization of an electrolytic conductivity detector for determination of toxic nitrogen-containing food contaminants separated by open tubular column gas chromatography

The combination of open tubular column gas chromatography with electrolytic conductivity detection has been evaluated for the determination of nitrogen-containing pesticide residues in food extracts. Optimization of the column position at the column-detector interface was crucial to the successful operation of the detector. The signal-to-noise ratio and response stability of the detector are greatly influenced by the composition of the electrolyte solvent. Large volume splitless injections using retention gaps and optimized detector operating conditions enabled pesticide residues in food extracts to be determined at sub parts-per-million levels. Although the electrolytic conductivity detector is less sensitive than the thermionic ionization detector, its greater nitrogen selectivity can he crucial to the determination of nitrogen-containing contaminants in food extracts, particularly in complex mixtures where phosphorus-containing contaminants or matrix compounds are also present.     

Multidimensional separation of isomeric species of chlorinated hydrocarbons such as PCB,PCDD, and PCDF

A multidimensional GC-system containing two capillary columns of different polarities, operated within a double oven instrument, was used for the optimized separation of complex isomeric mixtures of various types of chlorinated aromatic compounds such as PCB, PCDD, or PCDF. Electron capture was applied parallel to flame ionization detection to obtain sensitive signals of the PCB or PCDD and the n-alkane standards required for identification by Kovats indices, respectively. Electron capture detection within a valvelessly operated MDGC system forced changes in the usual instrumental set-up, the live-switching coupling piece being located within the second oven of the double oven instrument. This oven is operated isothermally to ensure optimal and interference-free detection, for stable flow conditions within the coupling piece and for the determination of the isothermal retention indices (Kovats), which are much more suitable for identification by retention than the so-called “linear” indices.     

Optimization and development of a high-performance liquid chromatography-based one-site immunometric assay with chemiluminescence detection

Various practical and theoretical considerations were examined in the creation and optimization of a high-performance liquid chromatography (HPLC)-based one-site immunometric assay. This method used an HPLC analyte analog column and post-column chemiluminescence detection. The specific analyte chosen as the model for this study was l-thyroxine (also known as T₄). In this technique, a sample containing thyroxine was first combined with an excess of anti-T₄ antibody Fab fragments that had earlier been conjugated with chemiluminescent acridinium ester labels. After incubation, the mixture was injected onto a column that contained immobilized T₄. The amount of thyroxine in the original sample was then determined by measuring the labeled Fab fragments that appeared in the non-retained fraction, or the decrease in excess Fab fragments that were bound to and later eluted from the column. Items considered in creating this assay included the preparation of acridinium ester-labeled Fab fragments, the detection of these fragments with a post-column reactor, and the creation of a suitable immobilized analog column for capturing excess labeled Fab fragments. The final method could measure T₄ in standards at clinically-relevant concentrations and provided a response within 1.5 min of sample injection, following a 20-45 min incubation with the labeled Fab fragments. Possible applications of this method include its use in clinical chemistry and the screening of proteomic or combinatorial libraries.     

Element-selective detection using capillary gas chromatography with atomic emission detection

Capillary GC coupled to an atomic emission detector (AED) provides a powerful new hyphenated technique for the separation and characterization of complex mixtures and compounds. The AED provides simultaneous and truly specific multi-element detection. The specificity of detection reduces the need for the complex sample pretreatment procedures which are necessary to reduce the interference from co-eluted substances which is experienced with detectors such as the FID and the ECD. A range of environmentally significant problems has been studied, including PCB analysis, the characterization of the reaction products of a novel waste treatment process, and the profiling of sulfur-containing species formed by the pyrolysis of various types of coal.     

Indirect detection in reversed-phase liquid chromatography: Ion-pair retention models for ionic compounds on μ Bondapak phenyl

Summary Retention models for ionic compounds in reversed-phase ion-pair chromatographic systems have been developed on the basis of the capacity ratios of solutes and ionic mobile phase components using indirect detection. The binding to the adsorbent, μBondapak Phenyl, has been expressed by ion-pair distribution constants and tested in the retention models by non-linear regression. All the ionic compounds followed adsorption models of the Langmuir type comprising two kinds of binding sites with widely different adsorption capacities and binding constants. The results indicate certain differences between the two sites regarding the binding of cationic and anionic components, respectively.     

Simultaneous Determination of Cefuroxime Axetil and Cefuroxime in Pharmaceutical Preparations by Thin-Layer Chromatography and Densitometry

Summary Conditions have been established for identification and quantification of cefuroxime axetil and cefuroxime by thin-layer chromatography and densitometry. Good separation of these compounds was achieved on silica gel by use of chloroform–ethyl acetate–glacial acetic acid–water, 4:4:4:1 (v/v), as mobile phase. UV densitometry was used to detect spots on chromatograms. Under these conditions the limits of detection for cefuroxime axetil and cefuroxime were 40 ng and 30 ng, respectively. Recoveries of cefuroxime axetil and cefuroxime were 99.93% and 97.94%, respectively.     

一种利用窗口结构提取红外弱小目标的方法

在分析红外弱小目标检测的检测概率和虚警率的基础上,引入了一种基于窗口结构的红外弱小目标检测方法.该方法无需进行图像差分,利用局部小范围内目标相对背景的灰度变化检测目标,可以在较低信噪比的情况下获得较高的检测概率和较低的虚警率.实验表明了该方法的有效性.     

激光诱导击穿光谱(LIBS)法微损快速检测党参中Pb

中药材重金属元素快速检测对污染监控及人们健康具有重要意义。激光诱导击穿光谱技术(Laser Induced Breakdown Spectroscopy, LIBS)属于一种快速检测方法,研磨压片等预处理方法相对样品消解已有所简化,但破坏了样品的物理性质,且不能满足中药材大宗品种、大批量检测需求。若进一步简化样品预处理,将更加凸显LIBS快速检测的优势。本文建立了激光诱导击穿光谱技术(LIBS)快速微损检测中药材样品重金属元素定标方法。线性相关系数R2为0.7764,建立的微损定标曲线线性可用于切片党参LIBS快速检测,对待测党参切片样品检测平均相对误差为3.74%,与电感耦合等离子体质谱法(ICP-MS)对比,相关系数R2为0.7957,验证了LIBS技术微损检测的可行性。制备的党参参考定标样品可多次重复用于待测样定标和仪器标定等。实验对待测党参样品仅进行切片处理,避免了研磨、压片等预处理,更加充分地体现LIBS快速检测的优势,为LIBS技术应用于中药材重金属元素快检等领域提供了一种新方法。     

Blind Speech Watermarking Method with Frame Self-Synchronization Based on Spread-Spectrum Using Linear Prediction Residue

State-of-the-art speech watermarking techniques enable speech signals to be authenticated and protected against any malicious attack to ensure secure speech communication. In general, reliable speech watermarking methods must satisfy four requirements: inaudibility, robustness, blind-detectability, and confidentiality. We previously proposed a method of non-blind speech watermarking based on direct spread spectrum (DSS) using a linear prediction (LP) scheme to solve the first two issues (inaudibility and robustness) due to distortion by spread spectrum. This method not only effectively embeds watermarks with small distortion but also has the same robustness as the DSS method. There are, however, two remaining issues with blind-detectability and confidentiality. In this work, we attempt to resolve these issues by developing an approach called the LP-DSS scheme, which takes two forms of data embedding for blind detection and frame synchronization. We incorporate blind detection with frame synchronization into the scheme to satisfy blind-detectability and incorporate two forms of data embedding process, front-side and back-side embedding for blind detection and frame synchronization, to satisfy confidentiality. We evaluated these improved processes by carrying out four objective tests (PESQ, LSD, Bit-error-rate, and accuracy of frame synchronization) to determine whether inaudibility and blind-detectability could be satisfied. We also evaluated all combinations with the two forms of data embedding for blind detection with frame synchronization by carrying out BER tests to determine whether confidentiality could be satisfied. Finally, we comparatively evaluated the proposed method by carrying out ten robustness tests against various processing and attacks. Our findings showed that an inaudible, robust, blindly detectable, and confidential speech watermarking method based on the proposed LP-DSS scheme could be achieved.