Non isothermal heat capacities and chemical reactions using a modulated DSC

An evaluation of measurements of heat capacities by modulated differential scanning calorimetry, MDSC is presented. Heat capacities were obtained from 130 to 550 K by a non isothermal technique in which a periodic modulation was added to the linear heating rate. Effects of amplitude and period of modulation, sample weight, sample type, pan type, and cell imbalance are described. Results are compared with those obtained using the isothermal technique. Heat capacity could be measured well into the decomposition region and separated from the non reversing signal due to chemical reaction (degradation), thus allowing a precise detection of onsets of the thermal degradation. This additional information will aid in the interpretation of the degradation chemistry, a field vital for the petroleum-industry.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayPart of this paper was presented at the 23rd Conference of the North American Thermal Analysis Society, Toronto, Canada, September 25–28, 1994.The author (MVN) acknowledges the experimental assistance provided by J. Balogh of Exxon Research and Engineering Company, Linden. Helpful discussions with A. Boller of the University of Tennessee at Knoxville, Dr. Y. Jin, General Electrical, and Dr. S. Sauerbrunn formerly of TA Instruments are also acknowledged.     

煤中有机硫形态结构和热解过程硫变迁特性的研究

利用热解 质谱并结合固定床热解反应装置，对煤中有机硫的形态主其对加氢热解过程 变迁特性的影响，进行了较系统的研究。结果表明，煤中有机硫的形态结构在褐煤中主要以脂肪族、芳香族硫化物为主，而在 煤中则主要以各种不同芳构化程度的噻吩结构为主，初步表明煤中有机硫形态结构随煤变质程度的变迁呈较强的连续递变性。煤热解过程中硫在呼产物中的变迁和分布与煤中有机硫的形态结构特点密切相关。较高芳构化噻吩结构不完全的氧     

Transfer activity coefficient of the proton in water-pyridine mixtures. A comparison of some extrathermodynamic assumptions

Various water-pyridine mixtures have been selected in order to compare several of the most popular extrathermodynamic assumptions involved in the determination of the transfer activity coefficient of the proton, _t(H⁺). Two techniques have been utilized for this purpose: voltammetry [study of the ferrocene, ferricyanide, or thallium(1) systems] and potentiometry at equilibrium (emf measurements of various galvanic cells, including liquid junctions and hydrogen electrode or silver electrode as a test electrode). The assumptions have been classified into various groups [e.g., _t(Z^p+)=_t(Z^q+) or _t(X^–)=_t(Y⁺)], and the values of _t(H⁺) have been experimentally determined in each case. The results vary depending upon the basic assumption (several pH units); less important differences (e.g., 0.5 pH unit) occur within a given group, and this may be assigned to the nature of the reference species chosen. A simple model of solvation has been also examined; the application of the law of mass action to the corresponding equilibrium provides results close to the _t(X^–) =_t(Y⁺)type of assumptions which ultimately leads to most self-consistent results.     

Features of a Scan and Clock Resource chip for providing access to board-level test functions

The architecture and some of the specific features of a Scan and Clock Resource (SCR) chip are described. This chip is currently being used in a high-end workstation product to provide access to the testability features of the individual chips and/or printed circuit boards. Using a board-level controller to gain access to the testability features of system components and interfacing the controller to a diagnostics processor (or external tester) is emerging as a common strategy for designing testable digital systems. Based upon experience gained from such an application, controller features that are deemed useful are discussed.This paper is an enhanced version of the author's earlier paper titled Towards a Standard Approach for Controlling Board-Level Test Functions, presented at the IEEE International Test Conference, ITC'90, Washington D.C., September 1990.     

Spectro-streak picosecond studies of intramolecular charge-transfer fluorescence

A spectro-streak photometer, an instrument for simultaneously measuring fluorescence intensity, time, and wavelength,I(t, ), with a single picosecond excitation pulse, has been constructed. Two typical and currently highly topical examples of mesurements are discussed. (1) the temporal development of the fluorescence form the intramolecular charge-transfer (ICT) state of the rigid aromatic compound 4,5-(1-methylindolino)3,4-naphthanthracene is studied in the protic solvent hexanol. (2) Propyl chain-linked pyrene/N,N-dimethylaniline is used as the model compound to study conformational changes associated with the transition from a contact ion pair to a sandwich exciplex.     

In Situ Polymerizing Internal Encapsulation Strategy Enables Stable Perovskite Solar Cells toward Lead Leakage Suppression

Despite the outstanding power conversion efficiency (PCE) of perovskite solar cells (PSCs) achieved over the years, unsatisfactory stability and lead toxicity remain obstacles that limit their competitiveness and large-scale practical deployment. In this study, in situ polymerizing internal encapsulation (IPIE) is developed as a holistic approach to overcome these challenges. The uniform polymer internal package layer constructed by thermally triggered cross-linkable monomers not only solidifies the ionic perovskite crystalline by strong electron-withdrawing/donating chemical sites, but also acts as a water penetration and ion migration barrier to prolong shelf life under harsh environments. The optimized MAPbI₃ and FAPbI₃ devices with IPIE treatment yield impressive efficiencies of 22.29% and 24.12%, respectively, accompanied by remarkably enhanced environmental and mechanical stabilities. In addition, toxic water-soluble lead leakage is minimized by the synergetic effect of the physical encapsulation wall and chemical chelation conferred by the IPIE. Hence, this strategy provides a feasible route for preparing efficient, stable, and eco-friendly PSCs.     

Titanosilicates as Supports for an Enzymatic Alcoholysis Reaction

Novel [Cr^III(amp)(bipy)(Cl)] (1) (H₂amp = N-(hydroxyphenyl)salicyldimine; bipy = 2,2-bipyridyl) and [Cr^III(app)(bipy)(Cl)]⁺ (2) (H₂app = N-(hydroxyphenyl)pyridine-2-carboxaldimine; bipy = 2,2-bipyridyl) complexes have been synthesized and characterized by physico-chemical methods. Complexes 1 and 2 have been employed as catalysts in the oxidation of both saturated and unsaturated hydrocarbons using tert-butylhydroperoxide (t-BuOOH). The significance of the results with respect to oxo-functionalization of C-H bonds both in unsaturated and saturated hydrocarbons is noted.     

Spectroscopic Study of the Complexation of DDQ with 1,10-Diaza-18-crown-6 in Chloroform Solution

The formation of charge transfer complexes with 1:1 and 2:1 stoichiometries (acceptor-to-donor) between DDQ and 1,10-diaza-18-crown-6 in chloroform solution was investigated spectrophotometrically. The stepwise formation constants of the resulting complexes were evaluated from the non-linear least-squaresfitting of the absorbance-mole ratio data. The enthalpies and entropiesof the complexation reactions were determined from the temperature dependence of the stepwise formation constants. The resulting 1:1 and 2:1 complexes were isolated in crystalline form and characterized. The results are consistent with the ionic structure of the resulting charge transfer complexes.     

相转移催化元素硫的歧化反应

本工作将相转移催化(PTC)应用于元素硫歧化反应,大大降低了反应温度,提高了反应速度。该反应被证实与熔态硫在水溶液中的歧化相同,即4S+6OH~-=2S~(2-)+S_2O_3~(2-)+3H_2O。比较了四乙基铵、四丁基铵、十六烷基三甲基铵和三辛基甲基铵四种相转移催化剂及四氯乙烯、二甲苯和四氯乙烷三种溶剂的影响。讨论了本体系相转移催化的证据。为改进以元素硫歧化反应为基础的提取冶金过程提供了依据。