壳管相变蓄热器强化传热实验研究

为了强化相变蓄热器传热性能,本文设计了三种新型壳管相变蓄热器结构,并对其换热性能进行实验研究。结果表明:在蓄热器内部添加分层结构和斜翅片换热性能最高,内部温度达到均匀化的时间随换热单元数增加而增大;换热管道间翅片的添加可有效地强化换热效果,改善蓄热器内部出现的温度严重分层现象,温度分布更加均匀;在研究范围内,换热流体温度的增加可有效提高蓄热器的换热效率,缩短相变时间。     

高温吸热管内超临界CO2传热特性的数值模拟

研究超临界CO2在高温吸热管内的传热特性是将其应用于聚光太阳能热发电技术中的基础.本文对此进行了数值模拟研究,分析了流体温度、流动方向、系统压力、质量流率和热流密度对对流传热系数和Nu数的影响.结果表明:高温区(800—1050 K)的对流传热系数和Nu数受流动方向和系统压力的影响均很小,但都随着质量流率的增大以及热流密度的减小而明显增大;而随着流体温度的升高,对流传热系数近似线性增大,Nu数则近似线性减小.另外,本文研究发现在高温区可忽略浮升力对传热的影响,而由高热流密度引起的流动加速效应会明显恶化传热.最后,选取了八种管内超临界流体传热关联式与模拟结果进行对比,发现使用基于热物性修正的关联式对高温区传热数据预测的结果优于使用基于无量纲数修正的关联式得到的结果,且其中预测效果最优的关联式得到的计算结果与模拟结果之间的平均绝对相对偏差为8.1%.     

降雪对地表附近自由空间量子信道的影响及参数仿真

量子通信具有覆盖面广、安全保密的优势,是当前通信领域国内外的研究热点.在自由空间量子通信过程中,光量子信号需要在地表上空一定高度进行传输,因此各种环境因素,例如降雪、沙尘暴、降雨、雾霾、浮尘等,不可避免地会影响量子通信性能.然而,迄今为止,降雪对地表附近自由空间量子信道影响的研究尚未展开.为此,根据降雪的强度,将降雪分为小雪(S1)、中雪(S2)、大雪(S3)和暴雪(S4)四个等级.由于空中正在飘落雪花对光量子信号具有能量吸收作用,称为消光效应,不同强度的降雪,其消光效应对自由空间光量子信号的影响不同.本文首先建立了不同等级降雪对光量子信号消光效应的数学模型;然后建立了因降雪导致的自由空间消光衰减定量关系,信道极限生存函数、不同降雪强度下的信道容量和量子误码率等性能参数受降雪影响的变化情况;最后建立了降雪强度、传输距离与链路衰减、幅值阻尼信道容量、信道生存函数以及信道误码率的数学模型.仿真结果表明,当降雪强度为2.1 mm/d(S1),传输距离为2.2 km时,通信链路衰减为0.0362,信道容量为0.7745,信道生存函数为0.2329,信道误码率为0.0105.当降雪强度为3.8 mm/d(S2)。传输距离为3.5 km时,通信链路衰减为0.1326,信道容量为0.4922,信道生存函数为0.2099,信道误码率为0.019.由此可见,降雪对量子通信性能有不同程度的影响.所以在实际应用中应根据降雪强度大小,自适应调节量子通信相关参数,提高量子通信的可靠性.     

Migration of Stabilizers from Polypropylene into Simulated Food

This study has investigated the migration of stabilizers from three polypropylene materials: a polypropylene homopolymer, a polypropylene block copolymer, and a polypropylene random copolymer in 10% ethanol, 3% acetic acid, 20% ethanol, 50% ethanol, and isooctane according to Regulation (EU) No. 10/2011. Measurements were performed at 20, 40, and 70°C and migration was evaluated from 10?min to 10 days. Measurements were performed by high-performance liquid chromatography (HPLC) with external calibration. The HPLC method provided high correlation coefficients, good precision, good accuracy, and suitable reproducibility. Diffusion coefficients for stabilizers were obtained using a rigorous model based on Fick’s second law and the values were between 6.1?×?10^?13 and 3.8?×?10^?9?cm²?s^?1. By applying an Arrhenius-type equation to the diffusion coefficients, an estimation of activation energy of the diffusion was obtained. The activation energies were from 39.97 to 98.75?kJ?mol^?1 for the stabilizers. The results indicate that the polypropylene material structure influenced the migration rate, which decreased in the order of the increasing crystallinity in the materials. The diffusion coefficients for stabilizers in the polypropylene random copolymer were higher than in the polypropylene block copolymer and polypropylene homopolymer. The random polypropylene copolymer had the lowest activation energy. These results show that a higher diffusion coefficient indicates a higher migration rate, and a system with a lower activation energy allows more migration.     

Transient deformation and heat generation of solid polyurethane under impact compression

This investigation examines the transient deformation and heat generation of a solid polyurethane subjected to dynamic compression. A special method is presented to prepare the solid polyurethane from raw materials which are commonly used to make polyurethane foams. Testing methods including infrared spectrum, differential scanning calorimetry, quasi-static and dynamic compression were applied to study the basic physical properties of the solid polyurethane. High-speed optical and infrared imaging systems are used to obtain visual and thermo-graphic images during impact tests. Under quasi-static compression, the solid polyurethane presents a good performance in toughness. This is confirmed by its Poisson's ratio. Under impact compression, the adiabatic heat generation are identified statistically. Temperature distribution confirms the fact of transient heat generation in specimens. Adiabatic self-heating mechanism provides a consideration to understand the negative strain-rate effect and post-yield softening effect found in the solid polyurethane. Mechanical properties including quasi-static and dynamic responses are related with the composition of molecular and structure of polymer.     

Physicochemical investigation of sulfonamide-derived compounds interacting with conventional cationic surfactants in aqueous media

The sulfonamide core in compounds is effective synthons, which offer exciting perspectives in chemotherapeutic and pharmacological research. In this study, we investigated the molecular interaction of potent sulfonamide derivatives (SDs), 2-benzenesulfonamido-3-methylbutyric acid (BSB) and tetraaquabis{3-methyl-2-[(phenylsulfonyl)amino]butanoate}copper(II) (Cu-BSB), with cationic surfactants, cetyltrimethyl ammonium bromide (CTAB) and ethylhexadecyl dimethyl ammonium bromide (EHDAB), using UV-visible spectroscopy and steady-state fluorescence measurements. Various mathematical models were applied to quantify the effect of cationic surfactants on physicochemical characteristics of BSB and Cu-BSB. These interactions were confirmed by estimating the partition coefficient (K_x), binding capacities (K_b), Stern-Volmer quenching constant (K_sv), and related Gibbs free energies (ΔG_b). The in-depth mechanism revealed that the binding mode in SD–surfactants combinational system is spontaneous and quenching exists in static mode initiated by ground-state complex formation. We believe that the true knowledge of host–guest interaction mechanisms concerning model membrane with entrapped moiety can help in better understanding of molecular recognition in related phospholipid membrane models.     

A tube-by-tube reduction method for simultaneous heat and mass transfer characteristics for plain fin-and-tube heat exchangers in dehumidifying conditions

This study proposed a new method, namely a tube-by-tube reduction method to analyze the performance of fin-and-tube heat exchangers having plain fin configuration under dehumidifying conditions. The mass transfer coefficients which seldom reported in the open literature, are also presented. For fully wet conditions, it is found that the reduced results for both sensible heat transfer performance and the mass transfer performance by the present method are insensitive to change of inlet humidity. Unlike those tested in fully dry condition, the sensible heat transfer performance under dehumidification is comparatively independent of fin pitch. The ratio of the heat transfer characteristic to mass transfer characteristic (h_c,o/h_d,o C_p,a) is in the range of 0.6~1.0, and the ratio is insensitive to change of fin spacing at low Reynolds number. However, a slight drop of the ratio of (h_c,o/h_d,o C_p,a) is seen with the decrease of fin spacing when the Reynolds number is sufficient high. This is associated with the more pronounced influence due to condensate removal by the vapor shear. Correlations are proposed to describe the heat and mass performance for the present plate fin configurations. These correlations can describe 89% of the Chilton Colburn j-factor of the heat transfer (j_h) within 15% and can correlate 81% of the Chilton Colburn j-factor of the mass transfer (j_m) within 20%.     

浮力对混合对流流动及换热特性的影响

用热线和冷线相结合的技术测量垂直圆管内逆混合对流流体的平均速度、 温度以及它们的脉动. 较详细地研究了浮力对逆混合对流的流动特性和传热特性的影响. 评 估了实验中采用的冷线测量温度补偿速度探头温度敏感的影响. 逆混合对流的传热结果用无 量纲参数Ω (Ω= Grd / Red2 )来表示，其中，基于管道直 径的雷诺数Red变化范围为900~18000, 浮力参数Ω变化范围为 0.004899~0.5047. 研究结果表明，浮力对逆混合对流的换热有强化作用. 随着葛拉晓夫数Grd的增加，温度脉动，流向雷诺正应力和流向温度通量增 大，并且在靠近壁面的流体区域尤其明显. 热线与冷线相结合的技术适合于研究非绝热的流 动测量，可以用于研究浮力对流动和换热特性的影响.     

稳恒扩展裂纹尖端的弹粘塑性场

采用弹粘塑性力学模型代替通常的弹塑性模型，对于I型和Ⅱ型问题，分别求得了不可压缩材料中平面应变动态扩展裂纹尖端的指数奇异性场和对数奇异性场，消除了弹塑性解中存在的塑性激波。通过数值计算，分别求得了两种奇异属性的分界线，建立起统一的裂纹尖端奇异性场。