一种新的滤纸基质固体表面低温荧光(燐光)测定装置

对自行研制的铜制滤纸基质低温荧光（燐光）测定的样品支架，进行了滤纸基质固体表面低温荧光测定的可行性研究。与同类冷冻装置和室温装置比较，本装置用于滤纸基质固体表面低温荧光（燐光）测定具有以下优点；样品的分析周期大大地缩短，由45min缩短为5-6min；装置简单、便宜耐用；操作简便，简化了室温测定时的滤纸干燥程序，应用范围广，方法的重现性好，检样分析结果的相对标准偏差RSD%小于10%，荧光（燐光）分析灵敏度高，检出限低，线性范围宽。     

Determination of benzene, toluene, ethylbenzene and xylenes in air by solid phase micro-extraction/gas chromatography/mass spectrometry

The aim of the study was to analyse BTEX compounds (benzene, toluene, ethylbenzene, xylenes) in air by solid phase micro-extraction/gas chromatography/mass spectrometry (SPME/GC/MS), and this article presents the features of the calibration method proposed. Examples of real-world air analysis are given. Standard gaseous mixtures of BTEX in air were generated by dynamic dilution. SPME sampling was carried out under non-equilibrium conditions using a Carboxen/PDMS fibre exposed for 30 min to standard gas mixtures or to ambient air. The behaviour of the analytical response was studied from 0 to 65 g/m³ by adding increasing amounts of BTEX to the air matrix. Detection limits range from 0.05 to 0.1 g/m³ for benzene, depending on the fibre. Inter-fibre relative standard deviations (reproducibility) are larger than 18%, although the repeatability for an individual fibre is better than 10%. Therefore, each fibre should be considered to be a particular sampling device, and characterised individually depending on the required accuracy. Sampling indoor and outdoor air by SPME appears to be a suitable short-delay diagnostic method for volatile organic compounds, taking advantage of short sampling time and simplicity.     

分子电子学的新进展

分子尺度电子学通过构筑基于微尺度电极和单个分子或者少量分子聚集体的"电极-分子-电极"结，研究跨越分子的电荷输运性质.它将分子本征化学特性与器件构筑相结合，考察分子的理化特性与电荷输运的构效关系，揭示微尺度的量子输运动力学原理，并探索基于分子的功能电子器件.是一个集化学、物理学与微电子学为一体的交叉学科.总结整理了分子电子学近些年在器件制备、输运机理及应用方面部分有代表性的进展.     

Analysis of microgram amounts of particulate material by simultaneous multiwavelength AES

A unique simultaneous emission spectrograph is utilized to perform qualitative and quantitative analysis on trace quantities of solid particulates. The atomic emission spectroscopic system consists of a direct current plasma source and an echelle spectrograph with a charge injection device detector, enabling the system to simultaneously measure the wavelength range from 220 nm to 520 nm with 0.02 nm resolution at 300 nm. Monitoring all wavelengths simultaneously allows the qualitative and quantitative determination of most major and minor constituent in a trace quantity of sample with little prior knowledge about the sample. The ability to perform qualitative and quantitative analysis on particulates is demonstrated by evaluating NBS certified coal fly ash, as well as a sample taken from the respirator air filter at an acute care unit in a hospital.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

便携式温度计校验仪的研制

介绍便携式温度计校验仪的工作原理及研制过程。对该仪器的恒温槽体机械结构、制冷器和散热器的设计、恒温槽体温度测量及控制等进行了详细叙述。该仪器提供的温度场稳定、均匀，在-20～100℃范围内可任意设定温度。解决了温度计现场快速校准的问题。     

A DFT and direct MO dynamics study on the structures and electronic states of phenyl-capped terthiophene

The structures and electronic states of phenyl-capped terthiophene (denoted by P3T) and the ionic species of P3T have been investigated by means of density functional theory (DFT) and direct MO dynamics calculations. P3T is one of the high-performance molecular devices, which has been utilized as a semi-conductor. The calculations indicated that the neutral P3T has a non-planar structure whose the phenyl rings in both ends of thiophene chain are largely deviated from the molecular plane. The cation and anion radicals, dication and dianion were considered as its ionic states. The structure for cation radical of P3T is close to more planar than that of neutral P3T. The structures for anion radical, dication and dianion take a pure planar structure. The first excitation energy of neutral P3T is calculated to be 2.90 eV at the TD-B3LYP/6-31G(d)//B3LYP/6-311+G(d) level, while the P3T cation and anion radicals have lower excitation energies (1.22 and 1.10 eV, respectively). The direct MO dynamics calculation showed that neutral, cation and anion hold near planar structure at 300 K. On the other hand, oligothiophene (n = 5) and its ionic species are strongly deformed from the planar structure, and thiophene rings in both ends of chain rotate rapidly by thermal activation. The mechanism of the electron conductivity in P3T was discussed on the basis of theoretical results.     

Preparation and Characterisation of Nano-Structured WO<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> Layers for Photoelectrochromic Devices

Nano-structured WO₃-TiO₂ layers were prepared by the sol-gel route. To obtain transparent, porous and crack free layers up to 0.8 μ m with a single dipping cycle a templating strategy was used. As a template three-dimensionally network based on organically modified silane was introduced to the WO₃ and TiO₂ sols. The WO₃ layers were dip-coated onto the conductive glass substrate (TCO) and the TiO₂ layers on the top of the WO₃ layer. The morphology and the structure of the layers were determined by Scanning Electron Microscopy (SEM), High Resolution Transmission Electron Microscopy (HR-TEM), Energy Dispersive X-Ray Spectroscopy (EDXS), Auger and Infrared spectroscopy. SEM image of the WO₃-TiO₂ layer confirmed the nano-porosity of the layers and give the size of the particles of about 10 nm for TiO₂ and 30 nm for WO₃ layer. Further analysis indicated that the titanium sol penetrates the WO₃ layer. Particles in the WO₃ layer consist of a crystalline monoclinic WO₃ core surrounded by a 5–10 nm amorphous phase consisting of WO₃, TiO₂ and SiO₂. The WO₃-TiO₂ layers were used to assemble all solid state photoelectrochromic (PE) devices. Under 1 sun irradiation (1000 W/m²) the visible transmittance of the PE device changes from 62% to 1.6%. The colouring and bleaching processes last about 10 minutes.     

电子对抗装备战术指标体系构建方法

考虑电子对抗的作战特点，遵循体系构建原则，依据作战目标特性，以作战规模为依据，把电子对抗装备战术指标划分为战略、战役、战术三个层次，并把作战规模作为一级指标的划分依据，选择作战用途和装备指标性质作为二级指标的划分依据，装备的具体作战能力和环境适应能力作为三级以下指标划分依据。     

某火控雷达俯仰同步传动机构的改进设计

针对某火控雷达俯仰同步传动机构的回差精度不能满足使用要求,经过理论分析与实践验证提出了可行的改进方案.