Focused ion beam preparation of samples for X‐ray nanotomography

The preparation of hard material samples with the necessary size and shape is critical to successful material analysis. X‐ray nanotomography requires that samples are sufficiently thin for X‐rays to pass through the sample during rotation for tomography. One method for producing samples that fit the criteria for X‐ray nanotomography is focused ion beam/scanning electron microscopy (FIB/SEM) which uses a focused beam of ions to selectively mill around a region of interest and then utilizes a micromanipulator to remove the milled‐out sample from the bulk material and mount it on a sample holder. In this article the process for preparing X‐ray nanotomography samples in multiple shapes and sizes is discussed. Additionally, solid‐oxide fuel cell anode samples prepared through the FIB/SEM technique underwent volume‐independence studies for multiple properties such as volume fraction, average particle size, tortuosity and contiguity to observe the characteristics of FIB/SEM samples in X‐ray nanotomography.     

Synthesis and proton conductivity of sulfonated,multi‐phenylated poly(arylene ether)s

A series of sterically‐encumbered, sulfonated, poly(arylene ether) copolymers were synthesized and their proton conductivity examined. The series was prepared by copolymerizing a novel monomer, 2″,3″,5″,6″‐tetraphenyl‐[1,1′:4',1″:4″,1″':4″',1″″‐quinquephenyl]‐4,4″″‐diol, with 4,4'‐difluorobenzophenone and bisphenol A. Subsequent sulfonation and solution casting provided membranes possessing ion exchange capacities of 1.9 to 2.7 mmol/g and excellent mechanical properties (Young's modulus, 0.2–1.2 GPa; tensile strength, 35–70 MPa; elongation at break, 62–231%). Water uptake ranged from 34 to 98 wt% at 80 °C/100% RH. Proton conductivities ranged between 0.24 to 16 mS/cm at 80 °C/60% RH, and 3 to 167 mS/cm at 80 °C/95% RH. TEM analysis of the polymers, in the dehydrated state, revealed isolated spherical aggregates of ions, which presumably coalesce when hydrated to provide highly conductive pathways. The strategy of using highly‐encumbered polymer frameworks for the design of mechanically‐robust and dimensionally‐stable proton conducting membranes is demonstrated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2579‐2587     

Highly alkaline stable anion exchange membranes from nonplanar polybenzimidazole with steric hindrance backbone

The anion exchange membranes (AEMs) with both high ionic conductivity and alkali stability are always the research focus of the AEM fuel cells. Here, a novel nonplanar polymer for AEMs manufacture, mPBI‐TP‐x‐R, with excellent hydroxide stability and satisfactory processability is reported for the first time. The serial mPBI‐TP‐x resins with steric hindrance were prepared by copolymerization among 3,3′,4,4′‐tetraaminobiphenyl, isophthalic acid and tetraphenyl‐terephthalic acid (TP) in different ratios under microwave condensation. The copolymers mPBI‐TP‐x were quaternized at N1/N3‐sites of benzimidazole unit in backbone with alkyl groups (R?CH₃, C₂H₅, n‐C₃H₇, or n‐C₄H₉) to prepare soluble ionomers, and the corresponding membranes in hydroxyl ion form were prepared by a solution casting method and subsequent ion‐exchange process. The chemical structure of all membranes was characterized using FTIR and ¹H NMR spectroscopy. The properties of ion exchange capacity, water uptake, swelling ratio, tensile strength, ionic conductivity, and alkaline stability were measured. Among the prepared membranes, the mPBI‐TP‐15%‐(n‐Bu) exhibited the excellent alkaline stability (only degradation ca. 5% under 1M NaOH aqueous solution at 60 °C for 800 h) and satisfactory OH^? conductivity (46.66 mS/cm at 80 °C). The current research provides a useful exploration to commercial application of alkaline fuel cell. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1087–1096     

Characterization of the Insoluble Sludge from the Dissolution of Irradiated Fast Breeder Reactor Fuel

Insoluble sludge is generated in the reprocessing of spent fuel. The sludge obtained from the dissolution of irradiated fuel from the “Joyo” experimental fast reactor was analyzed to evaluate its chemical form. The sludge was collected by the filtration of the dissolved fuel solution, and then washed in nitric acid. The yields of the sludge weight were less than 1% of the total fuel weight. The chemical composition of the sludge was analyzed after decomposition by alkaline fusion. Molybdenum, technetium, ruthenium, rhodium, and palladium were found to be the main constituent elements of the sludge. X-ray diffraction patterns of the sludge were attributable to Mo₄Ru₄RhPd, regardless of the experimental conditions. The concentrations of molybdenum and zirconium in the dissolved fast reactor fuel solutions were low, indicating that zirconium molybdate hydrate is produced in negligible amounts in the process.     

Quellenformen für γ-Bestrahlungsanlagen mit Reaktorbrennelementen

Wesentliche Bedeutung für die Strahlenausnutzung in γ-Bestrahlungsanlagen mit Reaktorbrennelementen hat die Quellenform, wobei der besonderen Quelldichteverteilung Rechnung zu tragen ist. Es wurden Bewertungskenngröβen abgeleitet, mit deren Hilfe Optimalvarianten der Quellenform für verschiedene Bestrahlgutbedingungen bestimmt werden können. Für fünf Quellen-grundformen sind Formeln zur Berechnung der Strahlenfelder angegeben. Mit Hilfe der ermittelten Kenngröβen wurden die verschiedensten Quellenformen verglichen. Die hieraus abgeleiteten Optimalbedingungen sind abschlieβend zusammengefaβt.     

Controlled water flooding of polymer electrolyte fuel cells applying superhydrophobic gas diffusion layer

Water transport is critical to the successful implementation of polymer electrolyte fuel cells (PEFC), especially in long-term and dynamic operation in automotives. Liquid water appears in the fuel cells not only from the water generated at the cathode catalyst layer but also as a result of condensation of water vapor from the humidified gases. In this study, we report a simple approach to prepare a superhydrophobic gas diffusion layer by chemical vapor deposition of polydimethylsiloxane without significant change in pore size of gas diffusion layer unlike other approach adding hydrophobic agent such as polytetrafluoroethylene. A superhydrophobic coating on the GDL can be obtained, leading to exceptionally enhanced power performance and stability of PEFC especially at a high current where water transport becomes more critical.     

A lattice Boltzmann model for diffusion of binary gas mixtures that includes diffusion slip

This paper describes the development of a lattice Boltzmann (LB) model for a binary gas mixture, and applications to channel flow driven by a density gradient with diffusion slip occurring at the wall. LB methods for single component gases typically use a non‐physical equation of state in which the relationship between pressure and density varies according to the scaling used. This is fundamentally unsuitable for extension to multi‐component systems containing gases of differing molecular masses. Substantial variations in the species densities and pressures may exist even at low Mach numbers; hence, the usual linearized equation of state for small fluctuations is unsuitable. Also, existing methods for implementing boundary conditions do not extend easily to novel boundary conditions, such as diffusion slip. The new model developed for multi‐component gases avoids the pitfalls of some other LB models. A single computational grid is shared by all the species, and the diffusivity is independent of the viscosity. The Navier–Stokes equation for the mixture and the Stefan–Maxwell diffusion equation are both recovered by the model. Diffusion slip, the non‐zero velocity of a gas mixture at a wall parallel to a concentration gradient, is successfully modelled and validated against a simple one‐dimensional model for channel flow. To increase the accuracy of the scheme, a second‐order numerical implementation is needed. This may be achieved using a variable transformation method that does not increase the computational time. Simulations were carried out on hydrogen and water diffusion through a narrow channel for varying total pressure and concentration gradients. Copyright © 2011 John Wiley & Sons, Ltd.     

Polyelectrolyte Nanocomposite Membranes Using Imidazole-Functionalized Nanosilica for Fuel Cell Applications

The preparation and characterization of a new type of nanocomposite polyelectrolyte membrane, based on DuPont Nafion/imidazole-modified nanosilica (Im-Si), for direct methanol fuel cell applications is described. Related to the interactions between the protonated imidazole groups, grafted on the surface of nanosilica, and negatively charged sulfonic acid groups of Nafion, new electrostatic interactions can be formed in the interface of Nafion and Im-Si which result in both lower methanol permeability and also higher proton conductivity. Physical characteristics of these manufactured nanocomposite membranes were investigated by scanning electron microscopy, thermogravimetry analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, water uptake, methanol permeability, and ion-exchange capacity, as well as proton conductivity. The Nafion/Im-Si membranes showed higher proton conductivity, lower methanol permeability and, as a consequence, higher selectivity parameter in comparison to the neat Nafion or Nafion/silica membranes. The obtained results indicated that the Nafion/Im-Si membranes could be utilized as promising polyelectrolyte membranes for direct methanol fuel cell applications.     

推进器辅助系泊系统的动态张力控制

在良好的环境条件下,无推进器锚泊系统足以完成定位。然而,随着石油生产发展到深水区海域,这种超尺寸的锚泊系统就不适用了。因此,必须发展"混合动力"方法,即利用推进器补偿来设计更轻量级的锚泊系统。提出了在动力辅助锚泊系统中,通过动态控制锚泊线张力的方法来减少能量消耗,根据无源性推导出一个参考自适应控制策略。仿真包含并采用了船舶刚体子模型和锚泊有限元子模型。仿真结果验证了使用动态锚线张力的可行性。     

基于极点优化配置的发动机空燃比控制器设计

针对燃油发动机的燃油油膜动力学子系统,以发动机的空燃比精确控制为最终目标,采用基于状态空间模型的极点配置方法设计控制器.为确定适当的目标极点,提出根据主导极点概念,利用坐标轮换法搜索最优参数,从而确定目标极点的方法.最后通过仿真实验,验证所提出方法有较好的空燃比控制效果,为空燃比精确控制提供了一种新的思路.