Synthesis of Tailored Perfluoro Unsaturated Monomers for Potential Applications in Proton Exchange Membrane Preparation

The aim of the present work is the synthesis and characterization of new perfluorinated monomers bearing, similarly to Nafion^®, acidic groups for proton transport for potential and future applications in proton exchange membrane (PEM) fuel cells. To this end, we focused our attention on the synthesis of various molecules with (i) sufficient volatility to be used in vacuum polymerization techniques (e.g., PECVD)), (ii) sulfonic, phosphonic, or carboxylic acid functionalities for proton transport capacity of the resulting membrane, (iii) both aliphatic and aromatic perfluorinated tags to diversify the membrane polarity with respect to Nafion^®, and (iv) a double bond to facilitate the polymerization under vacuum giving a preferential way for the chain growth of the polymer. A retrosynthetic approach persuaded us to attempt three main synthetic strategies: (a) organometallic Heck-type cross-coupling, (b) nucleophilic displacement, and (c) Wittig–Horner reaction (carbanion approach). Preliminary results on the plasma deposition of a polymeric film are also presented. The variation of plasma conditions allowed us to point out that the film prepared in the mildest settings (20 W) shows the maximum monomer retention in its structure. In this condition, plasma polymerization likely occurs mainly by rupture of the π bond in the monomer molecule.     

直接乙醇燃料电池初探

采用商品化的PtRu/C和Pt/C分别作乙醇阳电极和氧气阴电极的催化剂 ,Nafion 115膜作固体电解质 ,组装成面积为 9cm2 的单池 .考察了电池温度、氧气压力、乙醇浓度及流量等对电池性能的影响 .实验结果表明在电池温度为 85℃ ,乙醇浓度为 1.0mol/L ,流量为 0 .5mL/min ,氧气压力为 0 .5MPa ,流量为 6 8mL/min条件下 ,电池开路电压为 0 .6 0 8V ,电流密度 5 0mA/cm2 时的放电端电压为 0 .32 9V ,电池最大功率密度为 19.2 5mW /cm2     

Synthesis and characterization of novel functional poly(vinyl alcohol-co-styrene sulfonic acid) copolymers

This paper first time reports the preparation of random anionic copolymers from vinyl acetate (VAc) bearing electro-donating substituent and sodium 4-vinylbenzenesulfonate (SSA) having electro-withdrawing substituent. Copolymers (PVA-co-SSA) of different composition have been successfully prepared by a simple free radical solution polymerization technique. Resulting final copolymer contained neutral hydrophilic as well as ionizable ion exchange sites. Evaluation of spectral data obtained from Fourier transform Infrared spectroscopy, Raman spectroscopy, and ¹H Nuclear magnetic resonance helped in identifying and confirming the chemical structure of copolymers. Characterization of copolymers by gel permeation chromatography revealed high molecular weight with moderate polydispersity index. Analysis of thermal stability and glass transition temperature of copolymers by thermogravimetric analysis and differential scanning calorimetry were found in between corresponding homopolymers. Physicochemical properties of PVA-co-SSA can be beneficial for prospective advanced application in the niche area of smart membrane technology for energy and environment.     

New strategy for reversal tolerant anode for automotive polymer electrolyte fuel cell

New approach for the reversal tolerant anode for polymer electrolyte membrane fuel cell is suggested by using the multifunctional IrRu alloy catalyst having concurrent superior activities towards hydrogen oxidation reaction and oxygen evolution reaction to mitigate the degradation of anode under the fuel starvation condition.     

活性位高度暴露的钴/氮/碳电催化剂的构建及氧还原性能研究

金属/氮/碳催化剂（M/N/C，M=Fe、Co等）是最有发展前景的非贵金属电催化剂之一，其性能依赖于催化剂表面的活性物种密度.通过常规的热解含氮前驱物与金属盐的方法制得的催化剂往往存在金属活性物种被包埋而不能有效利用的缺点.考虑到石墨相氮化碳（g-C₃N₄）富含类吡啶氮和亚纳米孔腔结构，将g-C₃N₄包覆在高导电性碳纳米笼（hCNC）表面，进而利用表层g-C₃N₄的配位和限域作用锚定大量Co²⁺离子，获得的Co/g-C₃N₄/hCNC复合物经热解后形成了活性位高度暴露、导电性好、孔结构丰富的Co/N/C催化剂.800℃热解得到的最优化催化剂在碱性介质中展现出优异氧还原活性，其起始电位（0.97 V）与商业Pt/C催化剂相当，且抗甲醇干扰性能和稳定性优异.此项研究提供了一种构建具有高度暴露活性位的M/N/C催化剂的有效策略.     

Semi-interpenetrating polymer networks toward sulfonated poly(ether ether ketone) membranes for high concentration direct methanol fuel cell

Semi-IPNs were constructed by forming the crosslinking networks via the reaction between BPPO and diamine cross-linkers to overcome the dimensional swelling and methanol-permeation issues of SPEEK.     

Carbon Corrosion in Proton-Exchange Membrane Fuel Cells: Spectrometric Evidence for Pt-Catalysed Decarboxylation at Anode-Relevant Potentials

The carbon oxidation reaction (COR) is a critical issue in proton-exchange membrane fuel cells (PEMFCs), as carbon in various forms is the most used electrocatalyst support material. The COR is thermodynamically possible above the C/CO₂ standard potential, but its rate becomes significantly important only at high overpotential (e. g. PEMFC cathode potential). Herein, using on-line differential electrochemical mass spectrometry, we show that oxygen-containing carbon surface groups present on high-surface aera carbon, Vulcan XC72 or reinforced graphite are oxidized at PEMFC anode-relevant potential (E=0.1 V vs. the reversible hydrogen electrode, RHE), but not at E=0.4 V vs. RHE. We rationalized our findings by considering a Pt-catalysed decarboxylation mechanism in which Pt nanoparticles provide adsorbed hydrogen species to the oxygen-containing carbon surface groups, eventually leading to evolution of carbon dioxide and carbon monoxide. These results shed fundamental light on an unexpected degradation mechanism and facilitate the understanding of the long-term stability of PEMFC anode nanocatalysts.     

吸热型碳氢燃料在银、镧改性ZSM-5分子筛上的裂解研究

为提高吸热型碳氢燃料的吸热能效，对HZSM－5分子筛进行了La^3 、Ag^ 离子交换改性，考察了吸热型碳氢燃料NNJ－150在HZSM－5及改性ZSM－5分子筛催化剂上的裂解情况。结果表明，La^3 、Ag^ 离子交换改性催化剂提高了NNJ－150的裂解气中低碳烯烃的选择性（500℃,81.63%)，并且改性催化剂和未改性催化剂的活性在35min内均未随进样时间下降，转化率也未降低（500℃,HZSM-5,64.62%;LaZSM-5,65.71%；AgZSM-5,68.75%)。实验结果表明，双金属离子改性可为今后研究的方向。     

PEMFC催化剂的研究：自制抗CO中毒Pt-Ru/C电催化剂的性质

用胶体法制备了抗CO中毒PEMFC阳极Pt-Ru/C电催化剂（标记为THYT－2）,对 比研究了THYT－2与Johnson Matthey (JM)公司同类品牌Pt-Ru/C催化剂的电化学及 其它物理化学性能。结果表明,THYT－2电催化剂在甲醇燃料电池和CO／H_2（Φ_ (CO) = 1 * 10~(-4)）的氢氧燃料电池中的电催化行为与JM催化剂相当,但THYT－ 2在低浓度CO氢气燃料中的电池性能更好。两种催化剂的其它物理化学性质具有类 似性：XPS分析结果表明THYT－2和JM催化剂 中都有三种不同价态的Pt存在：即金 属态Pt(0)、氧化态Pt(II)和Pt(IV)。HRTEM测试结果表明两种催化剂的粒径处在2 ～3 mn左右,这可能是它们拥有良好电化学性能的主要原因之一。本文还对催化剂 中Pt与Ru组分的分布和相互作用进行了讨论,提出了改进Pt-Ru/C电催化剂的思路 。     

La0.8Sr0.2Ga0.8Mg0.2O2.8的电化学性质及其在SOFC中的应用

采用凝胶浇注法制备具有较高氧离子电导率的固体电解质La0.8Sr0.2Ga0.8Mg0.2O2.8粉料.X射线衍射结果表明,于1400℃焙烧后即形成了钙钛矿结构,无杂相存在.探讨了粉料压制坯体的致密化和导电性能在1450℃下与烧结时间的关系,发现烧结时间为18h时其相对密度达98.3%,而在24h的情况下,样品具有最佳的氧离子导电性.采用Ni-Ce0.8Gd0.2O1.9作为阳极,La0.8Sr0.2Ga0.6Ni0.4O2.7作为阴极,组装了平板型固体氧化物燃料电池(SOFC).阳极和阴极分别通入含3%H2O的氢气和空气,750℃时的开路电压为1.04V,最大输出功率密度(P)达252mW/cm2(U=0.48V,J=525mA/cm2).