Facile synthesis of exfoliated and highly conductive poly(arylene disulfide)/graphite nanocomposites

Exfoliated graphite has been synthesized by first synthesizing H₂SO₄ intercalated compound in a H₂O₂‐H₂SO₄ mixture, followed by exfoliation under microwave irradiation. Poly(arylene disulfide)/graphite nanocomposites were then fabricated by absorbing cyclic(arylene disulfide) oligomers into the pores of exfoliated graphite. Subsequently, the nanocomposite precursor was subjected to heat treatment to carry out the in situ ring‐opening polymerization of the oligomers via free radical mechanism. The as‐prepared nanocomposite exhibited a exfoliated nanostructure as evidenced by transmission electron microscopy (TEM) observation. The nanocomposite with a very small amount of graphite, 5 wt%, possesses a highly electrical conductivity of 4 S/cm, therefore, many applications can be found as conductive materials. Copyright © 2004 John Wiley & Sons, Ltd.     

低硫可膨胀石墨的制备

低硫可膨胀石墨的制备宋克敏，路文义，高淑英，阎秋燕（河北教育学院石家庄０５００９１）关键词低硫可膨胀石墨，制备，过氧化氢，硫酸柔性石墨具有耐高温、耐酸碱、抗拉、抗压、抗辐射、回弹性等优良性能，被广泛应用于化工、机械、肮天、原子能等领域。但其原材料可膨...     

抗癌药物的电化学研究(Ⅱ)道诺霉素在DNA修饰石墨粉末微电极上的电化学行为及分析应用

研究了道诺霉素 ( DNM)在石墨粉末微电极和 DNA修饰石墨粉末微电极上的电化学行为 ,并分析了产生差别的原因。在此基础上 ,提出了测定微量 DNM的方法 ,DNM浓度在 1 .0× 1 0 - 7～ 1 .0× 1 0 - 5mol/L之间其微分脉冲伏安 ( DPV)峰电流与浓度有良好的线性关系 ,检出限为 5 .0× 1 0 - 8mol/L。采用标准加入法测定了模拟样品中的 DNM,回收率在 94%～ 1 0 8%之间 ,结果令人满意     

Determination of fluoride in complex liquid matrices by electrothermal atomic absorption spectrometry with in-furnace oxygen-assisted ashing

A new chemical method is reported for the determination of total fluoride in complex liquids and suspensions, such as fruit juices, urine, serum and blood. It is based on the formation of the A1F radical in a graphite furnace afterin situ oxygen-assisted ashing of the untreated sample. The absorbance of this radical is measured at 227.45 nm. The method is relatively easy to use and provides a low detection limit (14 ng/ml) and reasonable reproducibility (5–10%).     

Electrochemical Response of Cobalt(II) in the Presence of Ammonia

The electrochemical oxidation of cobalt(II) at gold, boron‐doped diamond, basal and edge plane pyrolytic graphite, and highly oriented pyrolytic graphite electrodes in aqueous solutions containing NH₃ has been studied using cyclic voltammetry, with subsequent chemical and electrochemical processes explained in detail. Furthermore, the electro‐reduction of [Co(NH₃)₆]³⁺ in the presence of different electrolytes has also been studied to obtain a better understanding of the oxidation pathway of the Co(II)‐ammine complexes. In aqueous solution the mechanism can be described by the following scheme:     

Theoretical investigation of 1,4-dioxane complexes with water in the <Emphasis Type="Italic">chair</Emphasis> conformation by semiempiric MNDO/PM3 method

The structure and relative stability of 1,4-dioxane-water, (Diox)_n·(H₂O )_m (n = 1, 2, m = 1–6), molecular complexes have been calculated by semiempirical MNDO/PM3 method. A considerable variety of (Diox)_n·(H₂O )_m isomeric structures was stated. The mean energy of O_Diox…H_W-O_W hydrogen bond in (Diox)_n·(H₂O)_m complexes formed by 1,4-dioxane molecules in the chair conformation amounts to ?2.293 ± 0.210 kcal/mol with the average bond length 2.797 0.015 Å.     

Determination of mercury in soils and sediments by graphite furnace atomic absorption spectrometry with slurry sampling

A graphite furnace atomic absorption spectrometric procedure for the determination of mercury is presented, in which the samples are suspended in a solution containing hydrofluoric and nitric acids. Silver nitrate (4% m/v) and potassium permanganate (3%) are incorporated, in the order specified, and aliquots are directly introduced into the graphite furnace. A fast heating programme with no conventional pyrolysis step is used. The detection limit for mercury in a 125 mg ml⁻¹ suspension is 0.1 μg g⁻¹. Calibration is performed by using aqueous standards. The reliability of the procedure is proved by analysing certified reference materials.     

Molecular Adsorption-Induced Interfacial Solvation Regulation to Stabilize Graphite Anode in Ethylene Carbonate-Free Electrolytes

Many organic solvents have excellent solution properties, but fail to serve as lithium-ion batteries (LIBs) electrolyte solvents, due to their electrochemical incompatibility with graphite anodes. Herein, a new strategy is proposed to address this issue by introducing a surface-adsorbed molecular layer to regulate the interfacial solvation structure without the alteration of electrolyte composition and properties. As a proof-of-concept study, it is demonstrated for the first time that the intrinsically incompatible propylene carbonate (PC)-based electrolyte becomes completely compatible with graphite anodes by introducing a layer of adsorbed hexafluorobenzene (HFB) molecules to weaken the Li⁺-PC coordination strength and facilitate the interfacial desolvation process. As a consequence, the graphite/ NCM811 pouch cells using the PC-based electrolyte containing only 1 vol.% HFB demonstrate excellent long-term cycling stabilities over 1150 cycles. This strategy is also proved to be applicable to other ethylene carbonate (EC)–free electrolytes, thus providing a new avenue for developing advanced LIB electrolytes.     

A Materials Perspective on Direct Recycling of Lithium-Ion Batteries: Principles,Challenges and Opportunities

As the dominant means of energy storage technology today, the widespread deployment of lithium-ion batteries (LIBs) would inevitably generate countless spent batteries at their end of life. From the perspectives of environmental protection and resource sustainability, recycling is a necessary strategy to manage end-of-life LIBs. Compared with traditional hydrometallurgical and pyrometallurgical recycling methods, the emerging direct recycling technology, rejuvenating spent electrode materials via a non-destructive way, has attracted rising attention due to its energy efficient processes along with increased economic return and reduced CO₂ footprint. This review investigates the state-of-the-art direct recycling technologies based on effective relithiation through solid-state, aqueous, eutectic solution and ionic liquid mediums and thoroughly discusses the underlying regeneration mechanism of each method regarding different battery chemistries. It is concluded that direct regeneration can be a more energy-efficient, cost-effective, and sustainable way to recycle spent LIBs compared with traditional approaches. Additionally, it is also identified that the direct recycling technology is still in its infancy with several fundamental and technological hurdles such as efficient separation, binder removal and electrolyte recovery. In addressing these remaining challenges, this review proposes an outlook on potential technical avenues to accelerate the development of direct recycling toward industrial applications.     

Coprecipitation with metal hydroxides for the determination of beryllium in seawater by graphite furnace atomic absorption spectrometry

Coprecipitation first with magnesium hydroxide, next with tin(IV) hydroxide is developed for the determination of traces of beryllium in sea-water. To a 200-ml sample is added a sodium hydroxide solution to form magnesium hydroxide at pH 11.5, on which beryllium is quantitatively coprecipitated. The precipitate is separated by centrifugation and dissolved in 2 ml of 12 mol/l hydrochloric acid. The resulting solution (ca. 10 ml) is mixed with 2 mg of tin (IV) carrier and the pH is adjusted to 5.0 to collect the beryllium on tin (IV) hydroxide, leaving magnesium ions in the solution. The tin (IV) hydroxide is centrifuged, dissolved in 0.1 ml of 5 mol/l hydrobromic acid, and then diluted to 1 ml with water. Magnesium is so added as to be 500 g/ml for increasing the sensitivity about four times, and the beryllium in the solution is determined by graphite furnace atomic absorption spectrometry. The experiments with synthetic seawater samples showed that pg — g amounts of beryllium can be coprecipitated on the metal hydroxides and beryllium at the low ng/1 level can be determined with reasonable precision (RSD < 10%). The detection limit of the proposed method is 0.5 ng/l of beryllium in seawater.