Preparation and electrochemical properties of graphene‐supported Si‐TiO2 nanospheres as anode material for Li‐ion batteries

Graphene‐supported Si‐TiO₂ (Si‐Ti‐GE) composites have been synthesized by a simple polymerization and sintering method. In the Si‐Ti‐GE composites, many small Si‐TiO₂ particles are scattered on the graphene sheet, which can mitigate the agglomeration of the material and further reduce the particle size. The initial discharge capacities of Si‐TiO₂, Si‐Ti‐GE‐1, Si‐Ti‐GE‐2, and Si‐Ti‐GE‐3 are 336.9, 337.2, 339.8, and 356.6 mAh g⁻¹ at the current density of 200 mA g⁻¹, respectively. The discharge rate capacities of TiO₂, Si‐TiO₂, and Si‐Ti‐GE‐3 composites retain 57.5%, 41.7%, and 82.1% at the current density from 100 to 400 mA g⁻¹, respectively. Therefore, the introduction of graphene not only could facilitate the Li⁺ diffusion and electron transport but also could make better electrical conductivity.     

Computational Screening of 3 d Transition Metal Atoms Anchored on Defective Graphene for Efficient Electrocatalytic N2 Fixation

The synthesis of ammonia (NH₃) through the electrochemical reduction of molecular nitrogen (N₂) is a promising strategy for significantly reducing energy consumption compared to traditional industrial processes. Herein, we report the design of a series of monovacancy and divacancy defective graphenes decorated with single 3d transition metal atoms (TM@MVG and TM@DVG; TM=Sc−Zn) as electrocatalysts for the nitrogen-reduction reaction (NRR) aided by density functional theory (DFT) calculations. By comparing energies for N₂ adsorption as well as the free energies associated with *N₂ activation and *N₂H formation, we successfully identified V@MVG, with the lowest potential of −0.63 V, to be an effective catalytic substrate for the NRR in an enzymatic mechanism. Electronic properties, including Bader charges, charge density differences, partial densities of states, and crystal orbital Hamilton populations, are further analyzed in detail. We believe that these results help to explain recent observations in this field and provide guidance for the exploration of efficient electrocatalysts for the NRR.     

Magnetism‐Tunable Oligoacene Dioxide Diradicals: Promising Magnetic Oligoacene‐Like Molecules

Graphene oxide has attracted intense research interest recently because the graphene oxide synthesis route, as a promising alternative for cost‐effective mass production of graphene, has been explored. To further study the oxidation process and possible mechanism and to explore applicability of the oxidized products, we have performed a computational study on three series of oligoacene dioxides, focusing on their structures and electronic properties. Taking 1,5‐dioxidized naphthalene as a starting point, three series of oligoacene dioxides are considered as follows: 1) middle insertion by 1–2 benzene rings; 2) single‐side expansion using 1–2 benzene rings; 3) double‐side expansion using two benzene rings. On the basis of density functional theory and complete active space self‐consistent field (CASSCF) calculations, we reveal that oligoacene dioxides in the middle insertion series have a triplet ground state, whereas those in the single‐side expansion series and the double‐side expansion series have open‐shell broken‐symmetry singlet diradical ground states except for their common origin naphthalene‐1,5‐dioxide whose ground state is triplet and which is also viewed as the origin of the middle insertion series. Magnetic coupling interactions of these oligoacene dioxides are also determined. This work should help people toward an atomistic understanding of the electronic structures and properties of possible intermediates or products and even the oxidation mechanism of graphene sheets, and provides a reasonable strategy of designing novel graphene‐oxide‐based magnetic materials.     

石墨烯修饰玻碳电极测定邻苯二酚

制备了用于测定邻苯二酚(CAT)的石墨烯修饰电极,并应用循环伏安法研究了CAT在该修饰电极上的电化学行为;用差分脉冲伏安法研究了测试底液的pH值对该修饰电极性能的影响,结果表明,此修饰电极在含不同浓度CAT的PBS溶液(pH=7.0)中测定,响应电流与CAT浓度在5.0×10-8～5.6×10-4mol/L范围内有良好的线性关系,相关系数r=0.9919,检出限为6.68×10-9mol/L(S/N=3)。与其它几种修饰电极相比,石墨烯修饰电极制备简单、响应时间快、操作简便,稳定性和重现性良好,有应用价值。     

Stress‐Transfer‐Induced In Situ Formation of Ultrathin Nickel Phosphide Nanosheets for Efficient Hydrogen Evolution

Ultrathin two‐dimensional (2D) nanostructures have attracted increasing research interest for energy storage and conversion. However, tackling the key problem of lattice mismatch inducing the instability of ulreathin nanostructures during phase transformations is still a critical challenge. Herein, we describe a facile and scalable strategy for the growth of ultrathin nickel phosphide (Ni₂P) nanosheets (NSs) with exposed (001) facets. We show that single‐layer functionalized graphene with residual oxygen‐containing groups and a large lateral size contributes to reducing the lattice strain during phosphorization. The resulting nanostructure exhibits remarkable hydrogen evolution activity and good stability under alkaline conditions.     

Heterogenized peroxopolyoxotungstate catalyst on the surface of clicked magnetite‐graphene oxide nanocomposite: Magnetically recoverable epoxidation catalyst

A new heterogeneous catalyst for the epoxidation of olefins was prepared by immobilization of peroxophosphotungstate anions on the surface of clicked magnetite‐graphene oxide as magnetically recoverable support. To prepare the heterogeneous catalyst, the clicked magnetite‐graphene oxide support was prepared by thiolene click reaction of thiol functionalized graphene oxide with vinyl modified magnetite nanoparticles. The tailored support was then modified with aminopropyl groups followed by electrostatic interaction with peroxophosphotungstate anions to achieve the desired heterogeneous catalyst. Characterization of the catalyst was performed by various physicochemical methods which confirmed the successful immobilization of peroxopolyoxotungstate species on the surface of clicked magnetite‐graphene oxide. Catalytic activity of the catalyst revealed its high catalytic activity and selectivity in the epoxidation of various olefins in the presence of H₂O₂ as green oxidant. This heterogeneous catalyst can be magnetically reused several times without significant loss of activity and selectivity.     

Nitrogen doped nano porous graphene as a sorbent for separation and preconcentration trace amounts of Pb,Cd and Cr by Ultrasonic assisted in‐syringe dispersive micro solid phase extraction

Nitrogen doped nano porous graphene was used as an efficient sorbent in solid‐phase extraction process for simultaneous separation and pre‐concentration of metal ions lead (II), cadmium(II), and chromium(III)) in biological samples. Ultrasonic assisted in‐syringe dispersive micro solid phase extraction coupled with micro sampling atomic absorption spectrometry was utilized for the determination of metal ions. Nitrogen doped nano porous graphene was synthesized as a nano sorbent by chemical vapour deposition method. Methane and aniline were used as carbon and nitrogen sources. The characterization of sorbent was performed by field emission scanning electron microscope, transmission electron microscopy, atomic force microscope, fourier transform infrared, chemical element analysis and raman analysis. Effective parameters on the extraction efficiency such as pH, sorbent dosage, eluent volume and eluent concentration were optimized by central composite design and desirability function. Experimental results indicate that the optimal conditions for this extraction were pH = 6.4, 1.42 mg of sorbent, 100 μL of eluent, and 0.84 mol L^‐1 of eluent concentration. The detection limits are as low as 1.5, 0.3 and 0.9 μg L^‐1 for lead, cadmium, and chromium, respectively. The intra‐day precisions were 3.6, 4.38 and 2.94 and Inter‐day precision were 4.83, 5.26 and 4.52 for lead, cadmium, and chromium, respectively. Method performance was investigated by determination of mentioned heavy metals in complicated biological matrixes such as human plasma, urine and saliva samples with good recoveries.     

Formation of PdNiZn thin film at oil‐water interface: XPS study and application as Suzuki‐Miyaura catalyst

Nanosheet of PdNiZn and nanosphere of PdNiZn/reduced‐graphene oxide (RGO) with sub‐3 nm spheres have been successfully synthesized through a facile oil‐water interfacial strategy. The morphology and composition of the films were determined by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive analysis of X‐ray (EDAX) and elemental mapping. In the present study, we have developed a method to minimize the usage of precious Pd element. Due to the special structure and intermetallic synergies, the PdNiZn and PdNiZn/RGO nanoalloys exhibited enhanced catalytic activity and durability relative to Pd nanoparticles in Suzuki‐Miyaura C‐C cross‐coupling reaction. Compared to classical cross‐coupling reactions, this method has the advantages of a green solvent, short reaction times, low catalyst loading, high yields and reusability of the catalysts.     

Preparation,characterization and heterogeneous catalytic applications of GO/Fe3O4/HPW nanocomposite in chemoselective and green oxidation of alcohols with aqueous H2O2

Graphene oxide ‐ Fe₃O₄ ‐ NH₃⁺H₂PW₁₂O₄₀ ^‐ magnetic nanocomposite (GO/Fe₃O₄/HPW) was prepared by linking amino ‐ functionalized Fe₃O₄ nanoparticles (Fe₃O₄ ‐ NH₂) on the graphene oxide (GO), and then grafting 12 ‐ tungstophosphoric acid (H₃PW₁₂O₄₀) on the graphene oxide ‐ magnetite hybrid (GO ‐ Fe₃O₄ ‐ NH₂). The obtained GO/Fe₃O₄/HPW nanocomposite was well characterized with different techniques such as FT ‐ IR, TEM, SEM, XRD, EDX, TGA ‐ DTA, AGFM, ICP and BET measurements. The used techniques showed that the graphene oxide layers were well prepared and the various stages of preparation of the GO/Fe₃O₄/HPW nanocomposites successfully completed. This new nanocomposite displayed excellent performance as a heterogeneous catalyst in the oxidation of alcohols with H₂O₂. The as ‐ prepared GO/Fe₃O₄/HPW catalyst was more stable and recyclable at least five times without significantly reducing its catalytic activity.     

Single layer graphene: an alternative electrode material for ferroelectric liquid crystal based displays

We made comparative investigations on indium tin oxide (ITO) and single-layer graphene (SLG)-coated glass substrate as electrodes, specially for ferroelectric liquid crystal (FLC)-based system. We experimentally examined the comparative behaviour of important electro-optical FLC parameters for ITO- and SLG-based sample cells. The parameters are observed to be almost similar for both the cells. Interestingly, the value of threshold voltage is observed lower in SLG-based cell in comparison to that of conventional ITO/ITO cell. The presented results will definitely add a step to prove the suitability of graphene to be used as transparent electrodes in FLC-based display devices.