In–out asymmetry and interference effects in plasmon excitation by swift charged particles traversing a surface

We investigate the excitation of plasmons by a fast charged particle moving in the vicinity or traversing the surface of a solid along an arbitrary trajectory. We use both quantum‐mechanical and semiclassical dielectric formulations to study how the particle couples with the bulk and surface excitations. We pay special attention to the differences and similarities between incoming and outgoing trajectories, finding some novel oscillatory structures that can be ascribed to an interference effect between direct and reflected plasmon excitations. Copyright © 2013 John Wiley & Sons, Ltd.     

普适的基于能量的分块局域激发态聚类算法

在普适的基于能量的分块(GEBF)方法的框架下,大体系的局域激发(LE)能可通过一系列活性子体系激发能的线性组合近似得到,从而有效降低了计算的时间标度.然而,在体系的局域激发具有多个激发态的情形下,如何有效识别所有活性子体系的激发特征并将其组合是一个挑战.提出了一种基于局域激发态聚类的算法.该方案基于空穴-电子分析和基于密度的聚类(DBSCAN)机器学习算法,可以自动地聚合不同子体系中最相似的激发态并组合得到相应的局域激发态能量或激发能.结合该算法改进的LE-GEBF方法在荧光分子衍生物、荧光染料-水团簇及绿色荧光蛋白模型体系的计算中均获得了令人满意的结果.该算法有望大大提升LE-GEBF方法在计算局域激发时的稳定性和准确性,并可以有效处理吸收光谱具有多重峰的大体系.     

Study on the Phase Diagram of CsCl-CeCl3-HCl(11%)-H2O System and the Properties of the Compounds

The equilibrium solubility of CsCl-CeCl3-HCl(11%)-H2O qua-ternary system at 25℃ has been determined by the physicchemical analysis method ,and the phase diagram was plotted, Two new double salts 3CsCl.CeCl3.3H2O and CsCl.CeCl3.4H2O obtained from the complicated system were identified and characterized by XRD,TG-DTA ,DSC,UV and fluorescence spectroscopy, Studies on the fluorescence excitation and emission show that 3CsCl.CeCl3.3H2O and CsCl.CeCl3.4H2O have upconversion luminescence of infrared-visible range,and the upconversion emission intensity increases with the increase of ratio of CeCl3 in CsCl.     

多光子技术及其应用研究进展

本文综述了多光子技术的基本原理及其在生命科学、化学、物理和材料科学领域的应用研究进展。     

ZnS:Tm的薄膜电致发光及激发过程

用电子束蒸发的方法制备了传统的双绝缘层的ZnS:Tm的薄膜电致发光器件，对其电致发光谱进行分析，在光致发光中，Tm离子受到基质ZnS的无辐射能量传递，而在电致发光中，Tm被过热电子碰撞激发而非能量传递，在所研制的电致发光器件中，稀土TmF3掺杂浓度不同，器件的发光性能也不同，在双绝缘层的ZnS:Tm的薄膜电致发光器件的基础上，改变器件的结构，发现器件的蓝光发射与红光发射之比增加，并对Tm离子可能的发光机理进行了探讨。     

Asymmetrical flow field-flow fractionation and excitation-emission matrix spectroscopy combined with parallel factor analyses of riverine dissolved organic matter isolated by tangential flow ultrafiltration

Asymmetrical flow field-flow fractionation (AF4) with sequential on-line UV/visible and fluorescence detectors was used to investigate the composition of dissolved organic matter (DOM) in permeate and retentate fractions isolated by tangential flow ultrafiltration (TFF) at various concentration factors (i.e. ratio of initial volume to the retentate volume; CF). The permeation coefficient model, which defines the log-log relationship between DOM in the permeate fractions and CFs, described the permeation behaviour of DOM with regression coefficients r ² > 0.99. The dominance of higher-molecular weight retentate chromophoric DOM (CDOM) observed in TFF was consistent with the results of AF4. The weight-averaged molecular weights (M _w) of the integral permeate and retentate at CF = 20 were determined to be 1160 and 2320 by AF4, respectively, while their molecular weight distributions (MWD) were centered at 1120 and 1600 Da. M _w, MWD, and aromaticity (i.e. ratio of absorbance at 250 and 365 nm; E2/E3) in permeate fractions were altered significantly during the early stages of TFF (CF < 9). These changes, however, were not evident in excitation-emission matrix fluorescence properties as determined using the parallel factor analysis model. The application of AF4 to TFF fractions suggests that the choice of CF may have an important impact on the size distribution and aromaticity of permeate fractions, whereas fluorescence properties appear insensitive to concentration factor. These results suggest that the choice of CF is crucial only in the study of the permeate fraction where similar CF (i.e. > 9) should be used to obtain meaningful comparison among samples.     

QM/MM calculation of solvent effects on absorption spectra of guanine

Electronic spectra of guanine in the gas phase and in water were studied by quantum mechanical/molecular mechanical (QM/MM) methods. Geometries for the excited‐state calculations were extracted from ground‐state molecular dynamics (MD) simulations using the self‐consistent‐charge density functional tight binding (SCC‐DFTB) method for the QM region and the TIP3P force field for the water environment. Theoretical absorption spectra were generated from excitation energies and oscillator strengths calculated for 50 to 500 MD snapshots of guanine in the gas phase (QM) and in solution (QM/MM). The excited‐state calculations used time‐dependent density functional theory (TDDFT) and the DFT‐based multireference configuration interaction (DFT/MRCI) method of Grimme and Waletzke, in combination with two basis sets. Our investigation covered keto‐N7H and keto‐N9H guanine, with particular focus on solvent effects in the low‐energy spectrum of the keto‐N9H tautomer. When compared with the vertical excitation energies of gas‐phase guanine at the optimized DFT (B3LYP/TZVP) geometry, the maxima in the computed solution spectra are shifted by several tenths of an eV. Three effects contribute: the use of SCC‐DFTB‐based rather than B3LYP‐based geometries in the MD snapshots (red shift of ca. 0.1 eV), explicit inclusion of nuclear motion through the MD snapshots (red shift of ca. 0.1 eV), and intrinsic solvent effects (differences in the absorption maxima in the computed gas‐phase and solution spectra, typically ca. 0.1–0.3 eV). A detailed analysis of the results indicates that the intrinsic solvent effects arise both from solvent‐induced structural changes and from electrostatic solute–solvent interactions, the latter being dominant. © 2009 Wiley Periodicals, Inc. J Comput Chem 2010     

Lamp‐based wavelength‐resolved fluorescence detection for protein capillary electrophoresis: Setup and detector performance

A lamp‐based fluorescence detection (Flu) system for CE was extended with a wavelength‐resolved (WR) detector to allow recording of full protein emission spectra. WRFlu was achieved using a fluorescence cell that employs optical fibres to lead excitation light from a Xe‐Hg lamp to the capillary window and protein fluorescence emission to a spectrograph equipped with a CCD. A 280 nm band pass filter etc. together with a 300 nm short pass cut‐off filter was used for excitation. A capillary cartridge was modified to hold the detection cell in a commercial CE instrument enabling WRFlu in routine CE. The performance of the WRFlu detection was evaluated and optimised using lysozyme as model protein. Based on reference spectral data, a signal‐intensity adjustment was introduced to correct for transmission losses in the detector optics that occurred for lower protein emission wavelengths. CE‐WRFlu of lysozyme was performed using BGEs of 50 mM sodium phosphate (pH 6.5 or 3.0) and a charged‐polymer coated capillary. Using the 3‐D data set, signal averaging over time and emission‐wavelength intervals was carried out to improve the S/N of emission spectra and electropherograms. The detection limit for lysozyme was 21 nM, providing sufficient sensitivity to obtain spectral information on protein impurities.     

Wavelet transform analysis of ab initio molecular dynamics simulation: application to core-excitation dynamics of BF3

We propose a novel analysis method of ab initio molecular dynamics (AIMD) simulation using a continuous wavelet transform (c-WT) technique. The c-WT technique, one of the time-frequency signal analysis methods, provides a clear view of the dynamical information in time developments. Combined with the auto-correlation function of velocity by AIMD simulation, c-WT analysis enables us to well understand dynamical distribution, such as the vibrational properties following a change of electronic structure in a molecular system. As a practical application, AIMD simulation of core-excited BF(3) (B1s --> 2a(2) (')) is illustrated. AIMD simulation leads to the change of vibrational motion as well as structural deformation by core-excitation. The c-WT analysis clarifies the relationship between structural deformation and the related significant vibrational modes in core-excitation within 50 fs.     

一种乌青铜结构光催化剂：铁电-顺电相变与光催化性质

近年来,铁电材料作为一种潜在的高活性光催化剂材料越来越多地受到研究者关注.由于晶体结构的对称性破缺导致铁电晶体中出现自发极化,在这种极化内建电场的影响下,光生电子-空穴将发生空间分离,从而有效抑制载流子复合,进一步提高光催化体系的总量子效率.文献报道了很多性能优异的铁电光伏器件,在这样的思路下,越来越多的材料被直接作为光催化材料来研究,但有关顺电-铁电差异的报道很少,铁电性与光催化性能关联的直接证据尚有欠缺.研究表明, SrxBa1-xNb2O6(SBN)材料的居里温度(TC)对组分调变有很强的依赖性,当 Sr2+含量发生改变时(x =0.32-0.82),其居里温度可在10-270oC范围内变化.因此,合成一个居里温度接近室温的 SBN材料,研究其在顺/铁电相下自发极化行为、光生电荷分离行为、光催化行为及结构演变,就可能得到一个关于铁电性与光催化性能关系的直接证据,并有助于理解二者的关联性.本文以较低温度(65°C)下发生铁-顺电相变的 Sr0.7Ba0.3Nb2O6(SBN-70)材料为模型体系,使用X射线衍射、紫外可见光谱及不同温度下的铁电及介电测试、光电测试、光催化产氢和荧光激发谱等表征技术,研究了 SBN-70光电/光催化性能差异与相结构的相关性.首先使用高温固相合成法制备了纯相的四方钨青铜型 SBN-70材料,根据紫外可见漫反射光谱表征结果,推测 SBN-70材料在热力学上可发生光催化水分解反应.对 SBN-70进行的铁电及介电测试表明 SBN-70属于典型的弛豫型铁电材料：介电峰温度宽化显著,且介电峰位置随不同测试频率发生变化.在f =1 kHz测试下,其名义居里温度约为65oC.使用高温下两步烧结法制备了致密的 Ag/SBN-70/Ag陶瓷样品.受到高强度电场(E =30 kV/cm)极化的 Ag/SBN-70/Ag样品在紫外光照射下出现了显著光伏效应,铁电回线测试表明极化后的 SBN-70材料中存在强度约为0.8 kV/cm由剩余极化导致的内建电场,当经过极化的 SBN-70经过80oC退火后,光伏效应消失.结果表明, SBN-70极化后在内建极化场的作用下,在低温铁电相表现了显著的光生电荷分离能力,在进入高温顺电相后,这种分离能力随着自发极化的消失而消失.同时我们发现担载 Pt的 SBN-70粉末样品作为光催化剂在不同温度下存在很大的光催化产氢活性差异：反应在15oC时,产氢量为4.5μmol,随着反应温度升高,其产氢量升高,在60oC时为5.3μmol,继续升高温度至80oC时,发生了反常的活性变化,即产氢活性完全消失.这种反常的活性-温度关系可能与 SBN-70的铁-顺电相变有关：进入高温顺电相(80oC)后,晶体结构回到4/mmm点群,铁电畴结构不再存在,从而丧失了作为电荷分离驱动力的自发极化.不同温度下荧光激发谱结果也暗示了 SBN-70在高于65oC附近极化结构的消失.本文结果表明,铁电相中存在的铁电极化结构确实有利于光生电荷分离,进而提高了光催化反应活性.