A FREQUENCY OFFSET ESTIMATION AND COMPENSATION ALGORITHM FOR K/Ka-BAND COMMUNICATIONS

This paper presents a new open-loop technique for estimating and correcting Doppler frequency shift in K/Ka-band communication systems with special reference to the advanced communications technology satellite (ACTS) mobile terminal (AMT) modem, which utilizes square-wave pulse-shaped, binary differential phase shift-keyed (DPSK) modulation. The novelty of this estimation scheme is that it exploits the Doppler-induced phase shift over a fraction of a symbol interval to provide an estimate of the Doppler offset, without requiring symbol synchronization. Furthermore, by utilizing time-differential detection (delay-and-multiply), the proposed technique can tolerate much larger frequency offsets than existing open- or closed-loop techniques. Analytical results are provided for the variance of the above estimator and the error probability performance of the AMT is evaluated in the presence of the Doppler correction. Practical design considerations are also discussed, including a method for modifying the front end, digital bandlimiting filter in such a way that Doppler bias effects in the new estimator are eliminated. Simulation results reveal that, in general, performance improves with increasing data rates, i.e., the new frequency offset estimation/compensation algorithm induces a degradation from ideal of approximately 1 dB at a 6 dB energy per data symbol (bit) and a 2⋅4 kbps data rate. However, there is no appreciable degradation when the data rate is increased to 9⋅6 or 19⋅2 kbps.     

COMPUTER SIMULATION TECHNIQUES FOR A MOBILE SATELLITE COMMUNICATION CHANNEL

This paper gives a brief and systematic presentation of the computer simulation techniques of satellite communications, especially for a mobile satellite channel, based on a summarization of the author's exploration and experience in this area. It includes the equivalent complex baseband notation (ECBN) method, a very convenient mathematical form for software simulation; development of a multi-functional and expandable channel simulation system on a computer from L-band to Ka-band; channel impulse or frequency response estimation in real time by the technique burst-mode link analyser with least-squares algorithm (BMLA/LS), modelling and simulation of the channel fast fading due to multipath and shadowing; acquisition of the equivalent normalized binary signal-to-noise ratio (E_b/N₀) data at the channel input; and bit-error rate (BER) evaluation by the directly error-counting approach and the computational approach at the channel output in simulation.     

系统设计中如何节省转发器带宽的占用

本文根据村通工程中的实际情况,提出了3种节省转发器带宽的方法,并提出了不同技术适用的条件和需要注意的问题.     

Dynamic modeling and simulation of deploying process for space solar power satellite receiver

To reveal some dynamic properties of the deploying process for the solar power satellite via an arbitrarily large phased array (SPS-ALPHA) solar receiver, the symplectic Runge-Kuttamethod is used to simulate the simplified model with the consideration of the Rayleigh damping effect. The system containing the Rayleigh damping can be separated and transformed into the equivalent nondamping system formally to insure the application condition of the symplectic Runge-Kutta method©First, the Lagrange equation with the Rayleigh damping governing the motion of the system is derived via the variational principle. Then, with some reasonable assumptions on the relations among the damping, mass, and stiffness matrices, the Rayleigh damping system is equivalently converted into the nondamping system formally, so that the symplectic Runge-Kutta method can be used to simulate the deploying process for the solar receiver. Finally, some numerical results of the symplectic Runge-Kutta method for the dynamic properties of the solar receiver are reported. The numerical results show that the proposed simplified model is valid for the deploying process for the SPS-ALPHA solar receiver, and the symplectic Runge-Kutta method can preserve the displacement constraints of the system well with excellent long-time numerical stability.     

Ka高通量宽带卫星网络服务应用模式探讨

2017年4月12号第一颗国产高通量宽带卫星-中星16发射成功,Ka高通量宽带卫星网络在国内已经正式运行,本文就国内高通量卫星宽带业务做相应探讨。     

Design of Broadband L-band Erbium Doped Fiber Amplifier

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｗａｖｅｌｅｎｇｔｈ ｄｉｖｉｓｉｏｎｍｕｌｔｉｐｌｅｘｉｎｇ(ＷＤＭ )ｍｅｔｈｏｄｇｉｖｅｓａｓｏｌｕｔｉｏｎｏｆｄｅｍａｎｄｏｎｔｈｅｈｉｇｈｓｐｅｅｄａｎｄｈｉｇｈｃａｐａｃｉｔｙｔｒａｎｓｍｉｓｓｉｏｎ .ＯｎｅｏｆｔｈｅｋｅｙｔｅｃｈｎｏｌｏｇｙｏｆｔｈｅＷＤＭｔｒａｎｓｍｉｓｓｉｏｎｉｓｔｏｂｒｏａｄｅｎｂａｎｄｗｉｄｔｈｏｆｅｒｂｉｕｍ ｄｏｐｅｄｆｉｂｅｒａｍｐｌｉｆｉｅｒ (ＥＤＦＡ)ａｎｄｔｏｇｅｔｔｈｅｗｉｄｅｂａｎｄａｎｄｆｌａｔ ｇａｉｎＥＤＦＡ .…     

高功率激光系统nm宽带激光脉冲传输特性

对高功率激光系统采用宽带激光消除菲涅耳衍射问题进行了研究,指出只有数百nm的宽带啁啾光脉冲才对近场衍射有一定的平滑作用,数nm的宽带啁啾光脉冲对近场衍射几乎没有平滑作用;同时,还对宽带啁啾光的B积分表征方式和最快增长频率问题进行了研究,并与原型装置上开展的窄带脉冲、宽带啁啾堆积脉冲的非线性实验结果进行了对比研究,指出以最大B积分或加权B积分反映非线性自聚焦更为准确。研究还表明,在数nm,ns情况下最快增长频率与窄带激光脉冲的差别不大。     

Coherent Vibrational Dynamics and High-resolution Nonlinear Spectroscopy： A Comparison with the Air/DMSO Liquid Interface

We present a comparative study on the C-H stretching vibrations at air/DMSO （dimethyl sulfoxide） interface with both the free-induction decay （FID） coherent vibrational dynamics and the sub-wavenumber high resolution sum-frequency generation vibrational spectroscopy measurements. In principle the frequency-domain and time-domain spectroscopic measurements should generate identical information for a given molecular system. However, when the molecular systems are with several coupled or overlapping vibrational modes, obtain- ing detailed spectroscopic and coherent dynamics information is not as straightforward and rather difficult from either the time-domain or the frequency domain measurements. For the case of air/DMSO interface that is with moderately complex vibrational spectra, we show that the frequency-domain measurement with sub-wavenumber high-resolution sum-frequency generation vibrational spectroscopy is probably more advantageous than the time- domain measurement in obtaining quantitative understanding of the structure and coherent dynamics of the molecular interface.     

Application of Non-Destructive X-Ray Fluorescence Spectrometry to the Analysis of Suspended Matter in Sea Water

Abstract

In the framework of remote sensing studies concerning coastal transport of pollution in the Northern Adriatic Sea, a method has been developed for the quantitative determination of sulphur, iron, titanium, calcium, phosphorus, silicon, aluminium, magnesium in suspended matter of sea water.

The suspended material was collected by filtering on millipore membrane filters with pore width of 0.45 μ and directly analysed by X-ray spectroscopy. For calibration dried solution and particulate standard samples were used. Limits of sensitivity and precision of the method are reported.

Correlations between the concentration of these elements and the total suspended matter/chlorophyll are discussed.

The aim is to study the geochemical composition of particulate matter and its variations within the geographical site of the sea basin and the seasonal conditions. The approach is to consider aluminium and the other elements normalized on Al. On the basis of a matrix correlation analyses of some sets of data chosen in the restricted area for investigation, some hypothesis on superficial distribution of clay, carbonate, iron hydrous oxides and other mineral detrites, are taken into account. The results confirm the complex situation existing in the offshore area of the Venice lagoon from a geochemical point of view.

The suspended matter seem to be argillaceous in the Southern part of the investigated area and semi-argillaceous with hydrous oxides and carbonates in the Northern part which is influenced by the Piave river.     

NMR‐based analysis of the chemical composition of Japanese persimmon aqueous extracts

Japanese persimmon (Diospyros kaki L.) is recognized as an outstanding source of biologically active compounds relating to many health benefits. In the present study, NMR spectroscopy provided a comprehensive metabolic overview of Japanese persimmon juice. Detailed signal assignments of Japanese persimmon juice were carried out using various 2D NMR techniques incorporated with broadband water suppression enhanced through T₁ effects (BB‐WET) or WET sequences, and 26 components, including minor components, were identified. In addition, most components were quantitatively evaluated by the integration of signals using conventional ¹H NMR and BB‐WET NMR. This is the first detailed analysis combined with quantitative characterization of chemical components using NMR for Japanese persimmon. Copyright © 2015 John Wiley & Sons, Ltd.