丹宁纤维素富集-氢化物发生ICP-AES同时测定水中痕量锗

研究了丹宁纤维素富集10~(-11)g/ml级锗的条件,并考察了地下水中36种共存离子对磷酸介质中氢化物发生ICP-AES测定锗的干扰和消除,应用于测定地下水中的超痕量锗,结果满意,检出限为15ng/L。     

Computer generation of chemical structures from known fragments

The interactive generation of chemical structures from given fragments is described and discussed. It is implemented as a part of our expert system CARBON, based on C-13 NMR spectra. As it is designed, this program can also be a useful tool in the structure elucidation process when information on parts of the structure is obtained by other means (IR, mass and other spectrometries, chemical analysis, other relevant information). The topological characteristics of candidate fragments are first chosen interactively and then the elements are connected in all topologically possible ways. In the following step, the topological building blocks are substituted by chemical structural fragments resulting in a set of all chemical structures consistent with the input information.     

Optimization of selenium determination in plant samples by hydride generation and axial view inductively coupled plasma atomic emission spectrometry

The use of hydride generation coupled with axial view inductively couple plasma atomic emission spectrometry was presented for the determination of selenium in plant samples. The chemical factors affecting potentially the hydride generation efficiency (hydrochloric acid, sodium borohydride and sodium hydroxide concentrations) were assessed through investigation of chemical interference, accuracy and repeatability. The accuracy of measurements was not affected by elements present in high concentration in the plant matrix (K, Ca, Mg, and P). No interference was also observed with transition metals. Using a real sample (maize) with standard additions, decreases of recoveries were sometimes observed for 0.1% (m/v) NaOH, and attained 13.8% in the most unfavourable case. The final accuracy of the method was verified by using two certified reference materials: CRM 402 (white clover) and CRM 279 (sea lettuce). No statistically significant differences were obtained between the measured concentrations and the certified values. The optimized method was found sensitive (detection limit 0.15 μg l⁻¹), reliable and repeatable (R.S.D. between 1.3% and 4.0%).     

Synthesis and Characterization of ASnOAsO4(A = K and Rb)

Crystals of two alkali-metal tin(IV) arsenates, KSnOAsO₄ and RbSnOAsO₄, were grown from a flux and structurally characterized by single-crystal X-ray diffraction. Crystal data: RSnOAsO₄, orthorhombic, Pna2₁ (No. 33), a = 13.406(3) Å, b = 6.678(1) Å, c = 10.921(2) Å, Z = 8, R = 0.037 for 1173 independent reflections with I > 2.5ó(l); RbSnOAsO₄, as above except a = 13.567(3) Å, b = 6.791( 1) Å, c = 10.891(2) Å, R = 0.035 for 1958 independent reflections. The two compounds are isostructural with the nonlinear optical material KTiOPO₄. The oxygen frameworks of both tin compounds approximate closely to a centrosymmetric arrangement, as indicated from the analysis of atomic coordinates. Second harmonics were generated in powdered RbSnOAsO₄ to confirm the absence of a center of symmetry in the structure.     

Determination of arsenic in sediments, coal and fly ash slurries after ultrasonic treatment by hydride generation atomic absorption spectrometry and trapping in an iridium-treated graphite tube

A simple and reliable method for the determination of arsenic in sediment and in coal without sample digestion, based on hydride generation from slurry samples is proposed. After grinding the samples to a particle size of 50 μm, the sample powder was mixed with aqua regia and hydrofluoric acid in an ultrasonic bath for 30 min. After diluting the mixture with hydrochloric acid, the slurry was allowed to stand for 48 h, and an aliquot was used for hydride generation with sodium borohydride. More than 80% of the arsenic was leached to the aqueous phase under these conditions, except for one sediment sample with very high silica content. The generated arsine was collected in a graphite tube, treated with 0.5 mg of iridium as a permanent modifier, and the arsenic determination was carried out by electrothermal atomic absorption spectrometry. The same tube could be used for at least 160 cycles without any re-treatment. The greatest advantage of the method was that only a minimum of reagents and sample handling were required, reducing the risks of contamination and/or analyte loss. However, the addition calibration technique had to be used in order to obtain results within the 95% confidence level for 11 certified reference materials, 5 sediments, 5 coals and one coal fly ash. One certified sediment slurry was spiked with the analyte and the resulting addition calibration curve was used for the analysis of the certified sediments. Similarly, one certified coal was used to obtain the addition calibration curve for the coal and coal fly ash samples. The recoveries of the certified values, except for one sediment, were between 91 and 115%. The limits of detection in the samples were 0.54 and 0.7 μg g⁻¹ for the coal and sediment samples, respectively, obtained for 1 ml of slurry containing 1 mg of sample.     

Simultaneous determination of arsenic, antimony and selenium by gas-phase diode array molecular absorption spectrometry, after preconcentration in a cryogenic trap

This paper describes a method for the simultaneous determination of As(III), Sb(III) and Se(IV) by combining hydride generation and gas phase molecular absorption spectrometry. A system for continuous hydride generation has been designed and developed, based on the use of a double process of gas-liquid separation, and optimal compromise operation conditions for the three compounds have been found. After generation, the hydrides are collected in a liquid nitrogen cryogenic trap, and then evaporated and driven to the flow cell of a diode array spectrophotometer, in which the transient signals over the 190–250 nm wavelength interval are measured. Under the recommended conditions (sample flow: 35 ml min⁻¹, 0.5 M HCl; reductor flow: 4 ml min⁻¹ of 4% NaBH₄, solution) linear response ranges above 50 μg 1⁻¹ for As(III), 30 μg 1⁻¹ for Sb(III) and 200 μg 1⁻¹ for Se(IV) are obtained with detection limits of 22 μg 1⁻¹, 15 μg 1⁻¹ and 65 μg 1⁻¹, respectively. Multiwavelength linear regression equations were used for the simultaneous determination of the three elements in different synthetic samples, with good precision and accuracy and to study simultaneously the interference from different chemical species for the three compounds. Results were similar to those obtained by other techniques using hydride generation.     

氢化物发生-冷原子吸收光谱法测定化妆品中汞

介绍用氢化物发生-冷原子吸收光谱法在重铬酸钾-硝酸溶液存在下测定化妆品中汞的含量。方法空白值低、灵敏、准确、精密度好，特别适合于化妆品中汞的测定。     

断续流动-氢化物发生原子荧光法测定浓缩苹果汁中的砷

用断续流动－氢化物发生原子荧光法测定了浓缩萍果汁中的砷含量。确定了仪器的最佳条件，探讨了酸介质，硫脲－抗坏血酸用量，硼氢化钾加入量对测定As的影响。在选定的操作条件下，砷的检限为0．43ng/mL，相对标准偏差为3．4％－6．3％，加标回收率为94．0％－101．5％本方法简便，快速，灵敏，准确，应用于浓缩苹果汁中As的测定，得到满意的结果。     

Origin of the Landau-Lifshitz hydrodynamic fluctuations in nonequilibrium systems and a new method for reducing the Boltzmann equation

The Landau-Lifshitz fluctuating fluxes in fluctuating hydrodynamics are derived from the deterministic Boltzmann equation with the aid of a reduction method developed by Fujisaka and Mori. Thus it is shown that the hydrodynamic fluctuations innonequilibrium systems are generated by the reduction of variables from the-space distribution function to its five momentum moments, i.e., the hydrodynamic variables. This differs from the Bixon-Zwanzig and Fox-Uhlenbeck theories, in which the Landau-Lifshitz fluctuating fluxes are derived from the molecular fluctuating force in thestochastic Boltzmann-Langevin equation, which is, however, negligible in nonequilibrium systems. Thus the present method improves the Chapman-Enskog reduction method so as to include the hydrodynamic fluctuations generated by the reduction of variables.Supported in part by the Scientific Research Fund of the Ministry of Education.     

Determination of Inorganic Arsenic Species by Electrochemical Hydride Generation Atomic Absorption Spectrometry with Selective Electrochemical Reduction

A new direct procedure for the determination of inorganic arsenic species was developed by electrochemical hydride generation atomic absorption spectrometry （EcHG-AAS） with selective electrochemical reduction. The determination of inorganic arsenic species is based on the fact that As（Ⅲ） shows significantly higher absorbance at low electrolytic currents than As（Ⅴ） in 0.3 mol·L^-1 H2SO4. The electrolytic current used for the determination of As（Ⅲ） without considerable interferences of As（Ⅴ） was 0.4 A, whereas the current for the determination of As（Ⅲ） and As（Ⅴ） was 1.2 A. For equal concentrations of As（Ⅲ） and As（Ⅴ） in a sample, the interferences of As（Ⅴ） during the As（Ⅲ） determination were smaller than 5%. The absorbance for As（Ⅴ） could be calculated by subtracting that for As（Ⅲ） measured at 0.4 A from the total absorbance for As（Ⅲ） and As（Ⅴ） measured at 1.2 A, and then the concentration of As（Ⅴ） can be obtained by its calibration curve at 1.2 A. The methodology developed provided the detection limits of 0.3 and 0.6 ng·mL^-1 for As（Ⅲ） and As（Ⅴ）, respectively. The relative standard deviations were of 3.5% for 20 ng·mL^-1 As（Ⅲ） and 3.2% for 20 ng·mL^-1 As（Ⅴ）. The method was successfully applied to determination of soluble inorganic arsenic species in Chinese medicine.