A novel technique to measure the surface electrical potential of polymer films by using dielectric spectroscopy

A novel method that allows the determination of the electrical potential of a polymer surface has been applied for polypropylene film treated by N₂ + H₂ cold plasma. The plasma treatment results in formation on the film surface of NH₂ groups, which then gets transformed to NH₃⁺ in contact with an electrolyte and leads to the formation of an electrical double layer. The method consists of theoretical calculation of electrical model potential, using the measurement of the electrical capacitance of the film in contact with an electrolyte by dielectric spectroscopy. Comparison with the results obtained by theoretical model shows similar dependencies of the electrical potential as a function of amino‐groups density and electrolyte concentration, but systematic differences of absolute values are observed. Copyright © 2005 John Wiley & Sons, Ltd.     

Low dielectric thermoset. II. Synthesis and properties of novel 2,6‐dimethyl phenol–dipentene epoxy

A 2,6‐dimethyl phenol–dipentene adduct was synthesized from dipentene (DP) and 2,6‐dimethyl phenol, and then a 2,6‐dimethyl phenol–DP epoxy was synthesized from the reaction of the resultant 2,6‐dimethyl phenol–DP adduct and epichlorohydrin. The proposed structures were confirmed by Fourier transform infrared, elemental analysis, mass spectra, NMR spectra, and epoxy equivalent weight titration. The synthesized 2,6‐dimethyl phenol–DP adduct was cured with 4,4‐diamino diphenyl methane, phenol novolac, 4,4‐diamino diphenyl sulfone, and 4,4‐diamino diphenyl ether. The thermal properties of the cured epoxy resins were studied with differential scanning calorimetry, dynamic mechanical analysis, dielectric analysis, and thermogravimetric analysis. These data were compared with those for the bisphenol A epoxy system. The cured 2,6‐dimethyl phenol–DP epoxy exhibited a lower dielectric constant (ca. 3.1), a lower dissipation factor (ca. 0.065), a lower modulus, lower thermal stability (5% degradation temperature = 366–424 °C), and lower moisture absorption (1.21–2.18%) than the bisphenol A system but a higher glass‐transition temperature (ca. 173–222 °C) than that of bisphenol A system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4084–4097, 2002     

Topical Problems in Elemental Analysis of Advanced Ceramic Materials

Selected prominent problems in the analysis of advanced ceramic materials are surveyed. The importance of reliability of results is discussed in the field of elemental trace- and microanalysis in view of its interaction with economy, power of detection, local resolution and speciation selectivity. Particular problems in the analysis of major constituents, trace components and microlocal distributions are based on the striking propertics of ceramics; they are exemplified. Analytical assistance must start from the beginning of the production processing, in the preparation of the powdered base materials. Determination of the stoichiometry requires high accuracy and differentiation of chemical species in bulk and surface analysis of ceramic base powders. Element trace determination by direct instrumental methods requires standard reference materials for calibration; these are currently inavailable in a sufficient variety. For optimum reliability and power of detection, element traces must be prepared in isolated form in a small excitation volume for analysis. A review on the state-of-the-art of wet-chemical combined procedures is presented. Decomposition position procedures are emphasized, due to their risk of contributing severe systematic error. Combustion in elementary fluorine is presented for decomposition of refractory materials. The performance of some direct procedures is discussed. Very efficient methods are available for element trace determinations in ceramic materials, offering high detection power. Several approaches for high-resolution local microanalysis in non-conductive ceramic materials are identified as the most promising development in the analysis of sintered compact ceramic products and devices.     

Oxidation of Styrene in a Silent Discharge Plasma

A silent discharge plasma reactor has been developed to study the oxidation of styrene vapor in argon/oxygen mixtures. A number of analytical techniques were employed to determine the destruction efficiency and to characterize the intermediate products. The destruction efficiency was measured as a function of initial styrene concentration, temperature, and energy density of the plasma. The formation of solid products was observed in most experiments. At low temperature (100°C), the solid deposit was polymeric in nature, while at high temperature (300°C) the solid appeared to be amorphous carbon. A combination of high temperature and high energy density resulted in high destruction efficiency and minimal production of solid films. The destruction efficiency vs. energy density is shown to be more complex than a simple model predicting exponential behavior. Several reasons for the discrepancy are suggested. The e-folding energy density for the destruction of styrene is compared to literature values for other organic compounds, measured using similar types of plasma reactors.     

A novel microwave dielectric ceramic Ca2Zn4Ti16O38: Preparation and dielectric properties

A novel microwave dielectric powder with composition of Ca₂Zn₄Ti₁₆O₃₈ was synthesized through a citrate sol-gel process. The development of crystalline phases with heat-treating temperature for the gel derived powders was evaluated by using thermo-gravimetric analysis and X-ray powder diffraction analysis techniques. The pure phase of Ca₂Zn₄Ti₁₆O₃₈ with crichtonite crystal structure was obtained at relatively low temperature of 1000 °C. The synthesized powder has high reactivity and the dense ceramics with single crystalline phase were obtained at low sintering temperature of 1100 °C. Impedance spectroscopy and microwave dielectric measurements on sintered samples showed the present compound to be a modest dielectric insulator with excellent dielectric properties of ε_r∼47-49, Qf value ∼27,800-31,600 GHz and τ_f∼+45 to +50 ppm/°C. It shows comparable microwave dielectric properties to other moderate-permittivity microwave dielectrics, but much lower sintering temperature of 1100 °C.     

Dielectric analysis of polystyrene microcapsules using scanning dielectric microscope

 A dielectric imaging technique with a scanning dielectric microscope was applied to polystyrene microcapsules in an aqueous environment to study the electrical properties of individual ones. The dielectric images obtained over a frequency range from 10 kHz to 10 MHz showed frequency dependence, which indicated dielectric dispersion (or relaxation) due to interfacial polarization or the build up of charge on the boundaries between the microcapsule shell and the aqueous phases. The dielectric dispersion was analyzed based on an equivalent electrical circuit model and a shell-sphere model in which a spherical core is covered with an insulating shell. Received: 26 September 1997 Accepted: 26 December 1997     

Structural Study of an Unusual Cubic Pyrochlore Bi1.5Zn0.92Nb1.5O6.92

Single-phase pyrochlore-type specimens of Bi_1.5Zn_0.92Nb_1.5O_6.92 were studied using combined electron, X-ray and neutron powder diffraction techniques. Rietveld refinements using neutron powder diffraction data confirmed an average pyrochlore structure A₂B₂O₆O′ (Fd&3macr;m, a=10.5616(1) Å) with both Bi and Zn mixed on the A-sites. However, refinements revealed significant local deviations from the ideal pyrochlore arrangement which were caused by apparent displacive disorder on both the A and O′ sites. The best fit was obtained with a disordered model in which the A-cations were randomly displaced by ∼0.39 Å from the ideal eight-fold coordinated positions. The displacements occur along the six 〈112〉 directions perpendicular to the O′-A-O′ links. In addition, the O′ ions were randomly displaced by ∼0.46 Å along all 12 〈110〉 directions. Crystal-chemical considerations suggest the existence of short-range correlations between the O′ displacements and both the occupancy of the A-sites (i.e., Bi or Zn) and the directions of the A-cation displacements. The combined A-cation and O′ displacements change the coordination sphere of the A-cations from 8 to (5+3); the resulting coordination environment of the A-cations bears similarities to that of the (5+1)coordinated Zn in zirconolite-like Bi₂Zn_2/3Nb_4/3O₇. The observed displacive disorder in the A₂O′ network of the Bi_1.5Zn_0.92Nb_1.5O_6.92 structure involves atoms associated with the lowest-frequency vibrational bending mode, and is likely responsible for both the high dielectric constant and the dielectric relaxation reported for this compound.     

The application of dielectric analysis to drying latex films

Measurements of real and imaginary capacitance (C andC) have been made during the drying of a film-forming latex. In one experiment dielectric measurements at frequencies between 1 Hz and 100 kHz were made simultaneously with gravimetric measurements on a microbalance. It was found that both the rate of water evaporation and the a.c. conductance decrease sharply at high polymer volume fraction. These results are discussed qualitatively in terms of a model for the film-forming process. In another experimentC andC were recorded at 10 Hz along with automatic measurements of the build-up of the scratch resistance of the film. It was found that the mechanical response to film-formation appears significantly earlier than the dielectric response. This is also discussed qualitatively in terms of the model.The authors would like to thank Dr. I. Abrahams, Dr. S. Bell, and Dr. M. Reading for useful discussions regarding this work and M. Bahra for his help with the TFA measurements.     

Phenomenology of nonlocal cellular automata

Dynamical systems with nonlocal connections have potential applications to economic and biological systems. This paper studies the dynamics of nonlocal cellular automata. In particular, all two-state, three-input nonlocal cellular automata are classified according to the dynamical behavior starting from random initial configurations and random wirings, although it is observed that sometimes a rule can have different dynamical behaviors with different wirings. The nonlocal cellular automata rule space is studied using a mean-field parametrization which is ideal for the situation of random wiring. Nonlocal cellular automata can be considered as computers carrying out computation at the level of each component. Their computational abilities are studied from the point of view of whether they contain many basic logical gates. In particular, I ask the question of whether a three-input cellular automaton rule contains the three fundamental logical gates: two-input rules AND and OR, and one-input rule NOT. A particularly interesting edge-of-chaos nonlocal cellular automaton, the rule 184, is studied in detail. It is a system of coupled selectors or multiplexers. It is also part of the Fredkin's gate—a proposed fundamental gate for conservative computations. This rule exhibits irregular fluctuations of density, large coherent structures, and long transient times.     

Hydration and dielectric properties of aqueous solutions of protonated diallylmethylammonium polymer: transition from monomer to polymer

Abstract

The high-frequency dielectric relaxation of aqueous solutions of protonated diallylammonium polyelectrolyte, namely poly(diallylmethylammonium trifluoroacetate) has been studied at the maximum water dispersion frequencies, 7.5–25?GHz, and temperatures of 288, 298, and 308?K. Dielectric relaxation parameters have been calculated and compared with similar characteristics of aqueous solutions of monomer, diallylmethylammonium trifluoroacetate, and pyrrolidinium trifluoroacetate salt simulated structure of pyrrolidinium polymer link. It has been concluded that although the monomer features hydrophobic hydration, its polymer exhibits hydrophilic hydration properties. This change is related to conformation of hydrophilic-hydrophobic polycations in aqueous solutions and the change in the structure of polymer links.