L—氨基酸氧化酶电极的制作及电极特性的研究

报道了一种新的Ｌ－氨基酸氧化酶电极，这种酶电极系由氨气敏电极和以氨基化玻璃布为载体的酶膜所组成；研究了固定化条件对酶膜活性的影响以及底物浓度、温度和ｐＨ对电极响应特性的影响。该电极在６．０×１０＾－５～４．０×１０＾－３ｍｏｌ／Ｌ的底物浓度范围内呈良好的线性关系，检测下限为５．０×１０＾－５ｍｏｌ／Ｌ。在最宜条件下，酶电极具有良好的稳定性。     

Thermal decomposition of Cd(CH3COO)2·2H2O studied by a coupled TG-DTA-MS method

The thermal decomposition of cadmium acetate dihydrate in helium and in air atmosphere has been investigated by means of a coupled TG-DTA-MS method combined with X-ray diffraction analysis. Dehydration of Cd(CH₃COO)₂·2H₂O is a two-stage process with Cd(CH₃COO)₂·H₂O as intermediate. The way of Cd(CH₃COO)₂ decomposition strongly depends on the surrounding gas atmosphere and the rate of heating. CdO, acetone and CO₂ are the primary products of decomposition in air. In helium decomposition goes by two parallel and consecutive reactions in which intermediates, Cd and CdCO₃, are formed. Metallic cadmium oxidizes and cadmium carbonate decomposes giving CdO. Some of the metallic cadmium, depending on the heating rate and the concentration of oxygen, evaporates. Acetone is partially oxidized in secondary reactions with oxygen. This revised version was published online in July 2006 with corrections to the Cover Date.     

气相-质谱法测定粮谷中恶草酮的残留量

 应用微量化学法和固相萃取技术 ,建立了粮谷中恶草酮残留量的气相 质谱 (GC MS)测定方法。用苯 正己烷 (体积比为 1∶1)萃取 ,中性氧化铝小柱净化。净化液用GC MS测定 ,采用外标法定量。恶草酮在大米中的回收率为 90 4%～ 115 .7% ,RSD为 2 %～ 6 % ,在玉米中的回收率为 81 3%～ 10 9 7% ,RSD为 4%～ 9% ,最低定量检出限为 0 0 0 5mg/kg。该法快速、灵敏、准确 ,各项技术指标均满足农药残留检测的要求。     

Reaction gas chromatography: Study of the photodecomposition of selected substances

Summary A simple apparatus that permits to carry out photolytic reactions in direct connection with a gas chromatograph has been designed. The photodecomposition of C₅–C₇ aliphatic alkanes, C₁–C₅ primary, secondary and tertiary aliphatic alcohols and of some other substances was studied using this apparatus. The degradation products are characteristic of the individual types of alcohols. The identification of the individual types of alcohols. The identification of the degradation products confirms the proposed schemes for the photodegradation reactions. The apparatus described can also be used for the study of photolysis kinetics, as it permits the easy and rapid variation of the reaction conditions.     

Determination of organotin compounds in biological samples using accelerated solvent extraction,sodium tetraethylborate ethylation,and multicapillary gas chromatography–flame photometric detection

A method has been developed for species-selective analysis of organotin compounds in solid, biological samples. The procedure is based on accelerated solvent extraction (ASE) of analytes and includes extraction of the tin species with a methanol–water (90% methanol) solution of acetic acid/sodium acetate containing tropolone (0.03% w/v), their ethylation with NaBEt₄, and separation and detection by GC–FPD. The analytical procedure was optimized with an unspiked sample of harbor porpoise (Phocoena phocoena) liver. Effects of ASE operational variables (extraction temperature and pressure, solvent composition, number of static extraction steps) are discussed. Method detection limits (MDL) were in the range 6–10 ng(Sn) g^–1 dry weight and 7–17 ng(Sn) g^–1 dry weight for butyl- and phenyltin compounds, respectively. Recoveries were comparable with or better than those obtained by use of other procedures reported in the literature. The analytical procedure was validated by analysis of NIES No. 11 (fish tissue) certified reference material.     

New method for calculating the adsorption of noble gases on amorphous surfaces

A new approach to calculating the equilibrium characteristics of the adsorption of noble gases on the amorphous surfaces of adsorbents was developed and applied to the Ar−TiO₂(rutile) system. Intermolecular adsorbate-adsorbate interactions are taken into account for the nearest neighbors in the quasi-chemical approximation. The lattice energy parameters of all interactions of the model are determined from the Lennard-Jones potential (12-6). The formation of amorphous TiO₂(rutile) surface includes completion of the surface layers and partial removal of the surface oxygen ions. The quality of the amorphization procedure was confirmed by the experimentally measured heats and isotherms of adsorption of the system under study. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1109–1118, June, 1997.     

气相色谱法测定三聚氰氯的研究

气相色谱法测定三聚氰氯的研究李秀梅赵树岚＊田锦霞＊孙维星（东北师范大学化学系长春１３００２４）关键词气相色谱法三聚氰氯三聚氰氯（ＣＮＣｌ）３是活性染料的重要中间体及合成树脂、橡胶、塑料等的防老剂，也常用于除草剂、增白剂、药物、炸药等的生产中。传统的分...     

The study of electron beam flue gas treatment for coal-fired thermal plant in Japan

The fundamental research work with simulated coal-fired flue gas was performed in JAERI to get basic data for electron beam treatment of flue gas from thermal power plants in Japan. The standard condition of the experiments was set to be the same as that of next large scale pilot test in Nagoya. The concentrations of NO_x and SO_x were 225 ppm and 800 ppm, respectively. The temperature of the system was 65°C. The effect of multiple irradiation was observed for NO_x removal. The target SO_x and NO_x removals (94% and 80%, respectively) with low NH₃ leakage (less than 10 ppm) were achieved at 9 kGy irradiation with 0.9 NH₃ stoichiometry during 7 hours continuous operation. The facility for the pilot plant (12,000 Nm³/hr) has just built at the site of Shin-Nagoya power plant of Chubu Electric Power Company and will be started in full operation in November 1992.     

Surface characterization of macroporous glycidyl methacrylate based copolymers by inverse gas chromatography

Two samples of macroporous crosslinked poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate), PGME, with different porosity parameters were synthesized by suspension copolymerization and modified by ring-opening reaction of the pendant epoxy groups with ethylene diamine, EDA. Inverse gas chromatography at infinite dilution was used for the determination of adsorption properties of PGME, and copolymer modified with ethylene diamine, PGME-en. Thermodynamic parameters of adsorption, dispersive components of the surface free energies, and the acid/base constants for the copolymer samples were calculated. The calculated dispersive surface energy values, , for PGME and PGME-en are comparable with the literature data for nonconductive polymers.     

Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.