Sol Gel Processing of Low Permittivity,Fiber-Reinforced SiO2-Polyimide Substrates

Low permittivity ceramic substrates with a sandwich structure consisting of a porous, fiber-reinforced SiO₂ core and two thin polymer plates were fabricated by sol-gel processing, and polymer infiltration. The rheological behavior of an aqueous colloidal SiO₂ sol, containing short SiO₂ fibers was studied as a function of particle loading, fiber loading and gelation time. Short SiO₂ fibers were introduced to limit drying shrinkage and thus minimize substrate cracking during drying. After the psuedoplastic sol was tape cast and sintered at 1150°C for 2 h, a polyimide solution was infiltrated into the porous SiO₂ core. Permittivities ranging from 1.81 to 3.08 could be obtained by using 32–42% SiO₂, 5–50% polyimide and 63 to 8% porosity. The substrate strength was increased from 1.93 MPa to 3.83 MPa after polyimide infiltration.     

Static atomic displacements of Sn in disordered NiAs/Ni2In type HT-Ni1+δSn

The crystal structures of the intermediate solid solution HT (high temperature) Ni_1+δSn with δ=0.28, 0.52 and 0.61 (refined Ni contents) have been analyzed in detail by X-ray diffraction on single crystals. The previously reported basic atomic arrangement, i.e., a NiAs/Ni₂In structure type (P6₃/mmc, Ni(1) on 2a, 0 0 0, Ni(2) with an occupancy δ on 2d, and Sn on 2c, ), is confirmed. However, strong anisotropic atomic displacements occur for Sn within the a-b plane of the hexagonal unit cell, which require a Gram-Charlier expansion of the probability density function of Sn in order to obtain a good fit to the diffraction data. Direction, magnitude and the concentration dependence of the displacements can be interpreted in terms of the geometrical requirements of the different local atomic configurations in the planes z=±1/4, so that the displacements can be identified as static ones.     

溶胶-凝胶法制备高取向Bi4Ti3O12/SrTiO3(100)薄膜

Bi4Ti3O12具有良好的铁电、电光等性能山、特别是Bi4Ti3O12薄膜很适合作永久性存储材料，也可用于电光器件问．在微电子学、光电子学、集成光学、集成铁电学等领域均有广泛开发和应用前景，国外已用溅射法、激光沉积法制备出c轴取向Bi。Ti3Ol。薄膜【’，＼山东大学用MOCVD法制     

Aminolysis ofO-alkylO-4-nitropyenyl chloromethylphosphonates in reverse micellar solutions of the nonionic surfactant

The reaction ofn-hexylamine withO-alkylO-4-nitrophenyl chloromethylphosphonates in toluene solutions of poly(ethylene glycol)-600 monolaurate (PM) has been studied by spectrophotometry. The reverse micelles of the nonionic surfactant increase more than tenfold the observed rate constant of aminolysis. The catalytic activity of the surfactant is practically independent of the alkyl radical length of phosphonate. An increase in the concentration of amine results in a decrease in the catalytic efficiency. The character of the dependence of the rate constant on the concentration of PM is affected by the alkyl chain length of the substrate. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1735–1738, September, 1998.     

Electroreduction of α-glucose on CNT/graphite electrode modified by Zn and Zn–Fe alloy

Electroreduction of -glucose to form sorbitol on Zn/CNTs and Zn alloy/CNTs electrodes has been investigated in this paper. Carbon nanotubes (CNTs) used in this paper are grown directly on graphite disks by chemical vapor deposition. Zn and Zn alloy are electrodeposited on the activated CNTs/graphite electrode by pulse galvanostatic method. The micrographs of Zn/CNTs and Zn alloy/CNTs electrodes are characterized by scanning electron microscopy. The results show that the current efficiency of -glucose reduction on CNTs electrodes is much better than that on flat Zn electrodes. The order of the current efficiency on different electrodes is as follows: Zn/CNT (0.58) Zn–Fe/CNT (0.57)>Zn–Ni/CNT (0.43) Zn/graphite (0.42)>Zn (0.40). It indicates that CNTs have good potential application in electrosynthesis. Additionally, effects of some operating parameters, such as pH, temperature and -glucose concentration, on the current efficiency of -glucose reduction are also discussed.     

Pulse plating effect on microstructure and corrosion properties of Zn–Ni alloy coatings

The influence of pulse plating parameters on the surface morphology, grain size, lattice imperfection and corrosion properties of Zn–Ni alloy has been studied. The coatings were electrodeposited in an alkaline cyanide-free solution. AFM was applied for surface morphology examination, XRD measurements were carried out for phase composition and texture analysis, electron probe microanalysis was used for alloy chemical composition studies, while electrochemical techniques were applied for corrosion performance evaluation. The pulse plated Zn–Ni coatings appeared to consist of the γ-Zn₂₁Ni₅ phase and the composition of the alloy depended on the plating parameters. The grain size, lattice imperfection and homogeneity of grain distribution were established to be the main factors determining corrosion behaviour of the coating. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005     

Ascorbate oxidase

Ascorbate oxidase fromCucurbita sp. was isolated by ammonium sulfate precipitation and DEAE-dextran-silochrome column chromatography. The thermal and pH stabilities of the purified enzyme were investigated. TheK _M forl-ascorbic acid (1.5 mM) and chlorohydroquinone (0.37 mM) was determined. Substrate specificity of ascorbate oxidase was investigated and compared with those of laccases fromCoriolus hirsutus andCerrena maxima. Ascorbate oxidase was covalently bound to a polymeric membrane and used in an enzyme electrode for ascorbic acid.     

Study on the anodic reaction of Ni in an alkaline solution by transient pH detection based on scanning electrochemical microscopy (SECM)

The anodic reaction of Ni in an alkaline solution was studied by the tip–substrate voltammetry mode of scanning electrochemical microscopy (SECM) and cyclic voltammetry (CV). A platinum microdisc electrode was selected as the tip electrode, which functioned as a pH sensor with transient response capability. The pH value of the solution near the Ni electrode surface varied while the Ni substrate oxidation reaction occurred, and the pH variation could be detected by the tip faradic current. The cyclic voltammogram results showed that two types of hydroxides: i.e. α‐Ni(OH)₂ and β‐Ni(OH)₂ were formed during Ni oxidation in the lower potential region. In the proceedings of α‐Ni(OH)₂ → γ‐NiOOH and β‐Ni(OH)₂ → β‐NiOOH, the process of OH^? concentration decrease in the solution was ahead and behind of electron transfer in the solid phase, respectively. These results indicate that the OH^? adsorption process occurs as an elementary step in the former reaction and the H⁺ diffusion process from the inner to the outer layer of the solid phase occurs as a subsequent step in the latter reaction. The results also revealed that the oxide film on the Ni surface has a two‐layer structure. The real potential of the oxygen evolution reaction (OER) on the Ni surface with different cycles is also analyzed in the paper. Copyright © 2007 John Wiley & Sons, Ltd.     

混合稀土对ZL108铝合金组织与性能的影响

对稀土处理前后的ZL108合金进行了机械性能测试和断口分析, 表明稀土处理有利于提高合金的塑性和强度. 对稀土处理前后合金中氢总量进行了分析, 未加稀土的合金内氢总量与稀土处理后的合金相当, 结合性能与断口形态, 从侧面表明稀土改变了氢的存在形式.     

Hydrolytic and transglycosylation reactions of N-acyl modified substrates catalysed by β-N-acetylhexosaminidases

The hydrolytic and transglycosylation capabilities of 35 fungal β-N-acetylhexosaminidases with p-nitrophenyl 2-amino-2-deoxy-β-d-glucopyranoside and its four N-acyl derivatives (CHO, COCH₂OH, COCH₂CH₃, COCF₃) as substrates were tested. The preparation of four novel p-nitrophenyl disaccharides from these unnatural substrates catalysed by enzymes from Aspergillus oryzae, Penicillium oxalicum and Talaromyces flavus represents a considerable extension of the synthetic potential of glycosidases.