Characterisation of atomic-scale defects in ODS ferritic alloys by positron annihilation

The vacancy-type defects and their local chemical environment in different ODS alloys produced in the USA (14YWT), China (K5) and Russia (ODS EP-450) are studied. The Angular Correlation of Annihilation Radiation (ACAR), which is one of the positron annihilation spectroscopy method, was used. It was shown that in all alloys, except 14YWT, the dominant type of positron traps are vacancy-like defects, localised in matrix or associated with dislocations and/or interfaces of the incoherent particles. In the case of 14YWT alloy, which contains Y–Ti–O nanoclusters of a high density, the positrons confine and annihilate at O-vacancy pairs or complexes within nanoclusters. It is testified by enhanced electron density in annihilation sites and neighbourhood of Ti and Y atoms. These results, obtained by the ACAR method, indicate that the vacancies play an essential role in the formation of nanoclusters in ODS 14YWT alloy as it was theoretical predicted by first-principle calculations.     

NUMERICAL SIMULATION OF FIBROBLAST DUROTAXIS MIGRATION INDUCED BY STIFFNESS GRADIENT OF SUBSTRATE1)

建立了一种细胞趋硬性迁移的理论模型和有限元分析框架,为连续变刚度人工基质的试验设计提供理论依据。考虑了细胞体的黏弹性属性,以及细胞与基质间的配受体动态反应过程,并以配受体合成时间为时间步长,将细胞运动方程化为静力学形式进行求解。对有限元过程提出一种动约束,便于消除其结构矩阵的奇异性。结果表明,模型能够模拟黏着斑内部力的快速波动现象,细胞的运动速度与观测数据一致,可有效模拟20,h以上的长时程问题。     

Vertical copper oxide nanowire arrays attached three-dimensional macroporous framework as a self-supported sensor for sensitive hydrogen peroxide detection

A hierarchical nanostructure consisting of uniform copper oxide nanowires vertically grown on three-dimensional copper framework (CuO NWs/3D-Cu foam) was prepared by a two-step synthetic process. The uniform CuO NWs anchored onto the 3D foam exhibited outstanding electrocatalytic activity towards hydrogen peroxide reduction due to the unique one‐dimensional direction with its excellent catalytic activity and large surface area of 3D substrate, which enhanced electroactive sites and charge conductivity. As a result, a wide linear detection range of 1 µM–1 mM, good sensitivity of 8.87 µA/(mM ⋅ cm²), low detection limit of 0.98 µM, and rapid response time of 5 s to hydrogen peroxide were achieved under a working potential of −0.4 V in phosphate buffer solution (pH of 7.4). In addition, the CuO NWs/3D-Cu foam material showed excellent selectivity to hydrogen peroxide and good resistance against poisonous interferents, including ascorbic acid, dopamine, urea, uric acid, and potassium chloride. Furthermore, the CuO NWs/3D-Cu foam presented good reproducibility, stability, and accurate detection for hydrogen peroxide in real sample; therefore, it may be considered to be a potential free-standing hydrogen peroxide sensor in practical analysis applications.     

Magnetocaloric properties in a FeNiGaMnSi high entropy alloy

We investigated a new Fe_26.7Ni_26.7Ga_15.6Mn₂₀Si₁₁ high entropy alloy (HEA) without the rare earth element. The structural, magnetic and magnetocaloric properties of the resulting materials are presented. The HEAs successfully is produced by the arc melting with suction casting method. The crystal structures are characterised through multiphase Rietveld refinement of X-ray diffraction data. The structure of the HEAs was found to be the body centred cubic (bcc). In the magnetic measurements, the ferromagnetic to paramagnetic transition was obtained in the range of 300–400 K. With the employed suction casting method; the Fe_26.7Ni_26.7Ga_15.6Mn₂₀Si₁₁ HEA shows the best magnetocaloric properties as 1.59 Jkg⁻¹K⁻¹ maximum magnetic entropy change (0–2 T) and 75.68 Jkg^-1 refrigeration capacity after the annealing process.     

First-principles study of the effect of iron on the crystal structure,stability and chemical bonding in the β-based AlCu ordered η2-phase and the pretransition state of a solid solution

First-principles calculations showed that the thermodynamic stability of β-based ordered η₂-AlCu phase doped with Fe is due to iron substitution in the copper sublattice (Fe_Cu), which corresponds to the maximum number of Fe–Al bonds in the first cubic coordination polyhedron. This iron localisation leads to stable ω-like atomic displacements and pentagonal Al-nets in the (010) plane of η₂-AlCu(Fe). This phase with iron substituting copper (e/a?=?1.925) is an energetically preferred η-based non-canonical approximant of the icosahedral phase (e/a?=?1.86). The energy gain for the Fe_Cu position is determined by strong covalent Fe3d–Al3p bonding, while there is a weak Fe3d–Cu4s3d hybridisation for the Fe_Al substitution. Using a composite cluster model, we demonstrate that short-range order in the pretransition state of the β-Al–Cu–Fe solid solution observed prior to the precipitation of η-phase is stabilised due to formation of Fe–Al bonds in the first cubic coordination polyhedron of the composite cluster.     

Dislocation glide through non-randomly distributed point obstacles

Abstract

Classical meso-scale models for dislocation–obstacle interactions have, by and large, assumed a random distribution of obstacles on the glide plane. While a good approximation in many situations, this does not represent materials where obstacles are clustered on the glide plane. In this work, we have investigated the statistical problem of a dislocation sampling a set of clustered point obstacles in the glide plane using a modified areal-glide model. The results of these simulations show two clear regimes. For weak obstacles, the spatial distribution does not matter and the critically resolved shear stress is found to be independent of the degree of clustering. In contrast, above a critical obstacle strength determined by the degree of clustering, the critical resolved shear strength becomes constant. It is shown that this behaviour can be explained semi-analytically by considering the probability of interaction between the dislocation line and obstacles at a given level of stress. The consequences for alloys exhibiting solute clustering are discussed.     

Strain glass behaviour of Ni–Co–Mn–Sn ferromagnetic shape memory alloys

We report the direct experimental observations of the glassy behaviour in Ni–Co–Mn–Sn ferromagnetic shape memory alloys by doping sufficient substitutional point defect Co into the Ni sites (9 at%). The results showed that high level of Co doping had caused the complete suppression of the martensitic transformation and introduction of a strain glass transition in Ni–Co–Mn–Sn alloys. The strain glass transition was definitively characterized by the dynamic mechanical anomalies following the Vogel–Fulcher relationship and the signature nonergodicity of the frozen glass using a zero‐field‐cooled/field‐cooled heating measurement of static strain. The findings clarified the cause of vanishing of the martensitic transformation in Ni–Co–Mn–Sn alloy with high Co doping levels and the generality of glassy state in Ni–Mn based ferromagnetic shape memory alloys with high level of foreign elements doping. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Atomic fraction around defects associated with nanoparticles in AlCuMg alloys

A positron annihilation spectroscopy analysis method to obtain a quantitative determination of the chemical composition around defects inside nanoparticles is presented here. This methodology is applied to AlCuMg alloys to study the rapid hardening phenomena associated with solute-vacancy aggregation. Coincidence Doppler Broadening (CDB) and lifetime spectroscopy measurements of reference samples of pure elements with and without defects were analyzed to give quantitative information of the average chemical environment around vacancies, i.e. the atomic fraction of the first neighbors of these defects, in the alloys studied. The accuracy and reproducibility of the methodology is confirmed not only by good fits to the experimental data but, in most cases, by the consistency between the mean lifetime values predicted, using the CDB estimation, and the mean lifetime values independently measured. Discrepancies in the methodology are expected when there is poor CDB contrast between elements, i.e. having similar electronic structure (for example, Al and Mg). The criterion for establishing the statistical accuracy of the separation of elements in these special cases is discussed. The methodology can be applied not only to study homogeneous materials as metallic alloys, but also to study the depth profile in thin films.     

A thioester substrate binds to the enzyme Arthrobacter thioesterase in two ionization states: evidence from Raman difference spectroscopy

4‐Hydroxybenzoyl‐CoA (4‐HB‐CoA) thioesterase from Arthrobacter is the final enzyme catalyzing the hydrolysis of 4‐HB‐CoA to produce coenzyme A and 4‐hydroxybenzoic acid in the bacterial 4‐chlorobenzoate dehalogenation pathway. Using a mutation E73A that blocks catalysis, stable complexes of the enzyme and its substrate can be analyzed by Raman difference spectroscopy. Here we have used Raman difference spectroscopy, in the non‐resonance regime, to characterize 4‐HB‐CoA bound in the active site of the E73A thioesterase. In addition, we have characterized complexes of the wild‐type enzyme complexed with the unreactive substrate analog 4‐hydroxyphenacyl‐CoA (4‐HP‐CoA). Both sets of complexes show evidence for two forms of the ligand in the active site: one population has the 4‐hydroxy group protonated, 4‐OH; while the second has the group as the hydroxide, 4‐O⁻. For bound 4‐HP‐CoA, X‐ray data show that glutamate 78 is close to the 4‐OH in the complex and it is likely that this is the proton acceptor for the 4‐OH proton. Although the pK_a of the 4‐OH group on the free substrate in aqueous solution is 8.6, the relative populations of ionized and neutral 4‐HB‐CoA bound to E73A remain invariant between pH 7.3 and 9.8. The invariance with pH suggests that the 4‐OH and the ‐COO⁻ of E78 constitute a tightly coupled pair where their separate pK_a ‘s lose their individual qualities. Narrow band profiles are seen in the CO double bond and C‐S regions, suggesting that the hydrolyzable thioester group is rigidly bound in the active site in a syn gauche conformation. Copyright © 2011 John Wiley & Sons, Ltd.