Chirality Control by Substituents in the Asymmetric Addition of Et_2Zn to Aromatic Aldehydes Catalyzed by cis-(1 R,2S)-2- Benzamidocyclohexanecarboxylic Acid Derived 1,3-Aminoalcohols

A series of novel optically active 1,3‐aminoalcohols based on cis‐(1R,2S)‐2‐benzamidocyclohexanecarboxylic acid and trans‐(1R,2R)‐2‐benzamidocyclohexanecarboxylic acid were synthesized and used in the asymmetric diethylzinc addition to aromatic aldehydes. Not only the enantioselectivity but also the stereochemistry of the product were controlled by the N‐substituents and the substituents on the vicinity carbon to hydroxyl group of the cis‐derivatives.     

线性唯象传热定律下光驱动发动机的最优路径

以存在热漏、摩擦等不可逆性,以双分子反应系统2SO3FS2O6F2为工质的光驱动发动机为研究对象,考虑工质与环境之间传热服从线性唯象传热定律[q∝Δ(T-1)],分别以输出功最大和熵产生最小为目标对整个循环活塞运动的最优路径进行研究.利用最优控制理论得出了活塞运动路径及工质温度的最优构型,给出了最优构型的数值算例,并与牛顿传热定律[q∝Δ(T)]下的最优构型进行了比较.     

Simple quality assessment approach for herbal extracts using high performance liquid chromatography-UV based metabolomics platform

A lack of adequate or accepted research methodology has been a major obstacle to study herbal medicines. In this study, instead of the prevalent hyphenated chromatographies, common high performance liquid chromatography equipped with ultraviolet detector (HPLC-UV) and multivariate statistical analysis were utilized to assess the qualities of total flavones of sea buckthorn (TFS), an 85% ethanol extract of the sea buckthorn berries. Two complementary HPLC-UV methods were developed, validated and combined to comprehensively determine the ingredients in TFS. Principal component analysis (PCA) and partial least square-discriminant analysis (PLS-DA) of the combined analytical data showed that the six batches of TFS could be well differentiated. Hierarchical cluster analysis (HCA) using Ward's minimum variance method of the PLS-DA loading matrix demonstrated the known ingredients (quercetin, kaempferol, isorhamnetin, oleanolic acid and ursolic acid) and three unknown ingredients in TFS significantly contributed to the quality differences. A PLS regression model indicated that the results of the present method correlated well with the content of total flavones, which is now the quality control approach of TFS. Results from this study indicated that the proposed method is reliable for the quality reassessment of some widely used herbal extracts.     

Quantitative assessment of moisture damage for cacao bean quality using two-dimensional gas chromatography combined with time-of-flight mass spectrometry and chemometrics

Quality control of cacao beans is a significant issue in the chocolate industry. In this report, we describe how moisture damage to cacao beans alters the volatile chemical signature of the beans in a way that can be tracked quantitatively over time. The chemical signature of the beans is monitored via sampling the headspace of the vapor above a given bean sample. Headspace vapor sampled with solid-phase micro-extraction (SPME) was detected and analyzed with comprehensive two-dimensional gas chromatography combined with time-of-flight mass spectrometry (GC × GC–TOFMS). Cacao beans from six geographical origins (Costa Rica, Ghana, Ivory Coast, Venezuela, Ecuador, and Panama) were analyzed. Twenty-nine analytes that change in concentration levels via the time-dependent moisture damage process were measured using chemometric software. Biomarker analytes that were independent of geographical origin were found. Furthermore, prediction algorithms were used to demonstrate that moisture damage could be verified before there were visible signs of mold by analyzing subsets of the 29 analytes. Thus, a quantitative approach to quality screening related to the identification of moisture damage in the absence of visible mold is presented.     

A quality systems approach for identifying and controlling sources of error with point of care testing devices

Historically, due to the size and nature of the instrumentation, highly skilled laboratory professionals performed clinical testing in centralized laboratories. Today’s clinicians demand realtime test data at the point of care. This has led to a new generation of compact, portable instruments permitting ”laboratory” testing to be performed at or near the patient’s bedside by nonlaboratory workers who are unfamiliar with testing practices. Poorly controlled testing processes leading to poor quality test results are an insidious problem facing point of care testing today. Manufacturers are addressing this issue through instrument design. Providers of clinical test results, regardless of location, working with manufacturers and regulators must create and manage complete test systems that eliminate or minimize sources of error. The National Committee for Clinical Laboratory Standards (NCCLS) in its EP18 guideline, ”Quality management for unit-use testing,” has developed a quality management system approach specifically for test devices used for point of care testing (POCT). Simply stated, EP18 utilizes a ”sources of error” matrix to identify and address potential errors that can impact the test result. The key is the quality systems approach where all stakeholders – professionals, manufacturers and regulators – collaboratively seek ways to manage errors and ensure quality. We illustrate the use of one quality systems approach, EP18, as a means to advance the quality of test results at point of care. Received: 26 June, 2002 Accepted: 17 July 2002 Presented at the European Conference on Quality in the Spotlight in Medical Laboratories, 7–9 October 2001, Antwerp, Belgium Abbreviations NCCLS National Committee for Clinical Laboratory Standards (formerly) · POCT point of care testing · QC quality control · HACCP hazard analysis critical control points · CLIA clinical laboratory improvement amendments (of 1988) Correspondence to S. S. Ehrmeyer     

基于氨基酸模糊聚类分析的跨膜区域预测

跨膜蛋白在进化过程中,序列保守性较差,即使是同源蛋白序列的一致性程度也较低,因而在跨膜区预测算法中,通过序列的一致性程度来选取训练集并不能有效地消除预测结果对训练集的过度适应性．本文提出了一种基于氨基酸模糊聚类分析的预测算法,通过氨基酸在各个区域分布的相似性程度进行模糊聚类,从而根据一类氨基酸的分布特性而不是各个氨基酸的分布特性进行跨膜区预测．结果表明,该方法能在一定程度上消除训练集的选取对测试结果的影响,提高跨膜蛋白拓扑结构预测的准确度,特别是提高对目前知之甚少的跨膜蛋白的预测准确度．     

Emulsion polymerization: From fundamental mechanisms to process developments

Emulsion polymers are “products by process” whose main properties are determined during polymerization. In this scenario of margins reduction, increasing competition, and public sensitivity to environmental issues, the challenge is to achieve an efficient production of high‐quality materials in a consistent, safe, and environmentally friendly way. This highlight reviews the investigations carried out at The University of the Basque Country to develop a knowledge‐based strategy to achieve these goals. First, the research in fundamental mechanisms is discussed. This includes studies in radical entry and exit, oil‐soluble initiators, propagation‐rate constants of acrylic monomers, processes involved in the formation of branched and crosslinked polymers, microstructure modification by postreaction operations, the formation of particle morphology, and reactive surfactants. The advanced mathematical models developed in the group are also reviewed. In the second part, the advances in process development (optimization, online monitoring and control, monomer removal, production of high‐solids, low‐viscosity latices, and process intensification) are presented. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1025–1041, 2004     

Practical and quality-control aspects of multi-element analysis with quadrupole ICP–MS with special attention to urine and whole blood

Two screening methods were developed for rapid analysis of a great number of urine and blood samples within the framework of an exposure check of the population after a firework explosion. A total of 56 elements was measured including major elements. Sample preparation consisted of simple dilution. Extensive quality controls were applied including element addition and the use of certified reference materials. Relevant results at levels similar to those found in the literature were obtained for Co, Ni, Cu, Zn, Sr, Cd, Sn, Sb, Ba, Tl, and Pb in urine and for the same elements except Ni, Sn, Sb, and Ba in blood. However, quadrupole ICP–MS has limitations, mainly related to spectral interferences, for the analysis of urine and blood, and these cause higher detection limits. The general aspects discussed in the paper give it wider applicability than just for analysis of blood and urine—it can for example be used in environmental analysis.     

Clinical quality vs analytical performance: what are the right targets and target values?

For optimal performance of laboratory tests, testing processes should be designed to provide clinically useful quality and QC procedures should be selected to assure that the necessary clinical quality is achieved in routine production. One important issue is how to define clinical quality. Today’s practice guidelines, quality regulations, and quality standards provide some targets for analytical quality, but they fail to adequately address clinical quality. Target values for precision and accuracy are not the same as clinical quality, though analytical performance certainly contributes to the clinical quality of test results. How can we proceed in our quest to improve quality when there are inconsistencies and inadequacies in the specifications found in practice guidelines, regulations, and standards? Today target values are often being set for the wrong targets. A better approach is possible if we focus on test interpretation guidelines to define clinical quality, then derive specifications for the accuracy and precision that are appropriate for the method, as well the QC rules and numbers of control measurements that are necessary to guarantee the desired quality will be achieved in routine operation of the testing process.     

Recent topics of functionalized organolithiums using flow microreactor chemistry

Examples in this mini-review illustrate the potential of flow microreactor chemistry in chemical science and chemical production. Flow microreactors provide a powerful method for novel transformations via functional organolithiums that cannot be achieved using a conventional macro batch reactor.