Existence results for second order boundary value problem of impulsive dynamic equations on time scales

In this paper, Schaefer's fixed point theorem and nonlinear alternative of Leray-Schauder type are used to investigate the existence of solutions for second order boundary value problem for impulsive dynamic equations on time scales.     

超大规模集成电路波导光互连技术的现状与前景

介绍超大规模集成电路(VLSI)波导(?)互连技术的最新进展,并预测其发展方向,以及如阿解决存在的实际问题。     

钢卷尺刻度在线测量系

本文介绍了一种钢卷尺刻度在线测量系统 ,它采用了高速摄像及计算机数据处理技术 ,文章阐述了系统的非接触动态测量原理 ,描述了光电信号的处理方法 .     

Improved accuracy of quantitative XPS analysis using predetermined spectrometer transmission functions with UNIFIT 2004

The accuracy of quantitative XPS analysis can be improved using predetermined transmission functions. Two different calibration methods are used for estimating the transmission function T(E) of a photoelectron spectrometer, applying a survey spectra approach (SSA) and a quantified peak‐area approach (QPA) to minimize the quantification error. For the SSA method, Au, Ag and Cu spectra measured with the Metrology Spectrometer II have been used. The new QPA method was built up from Au 4f, Au 4d, Au 4p_3/2, Ag 3d, Ag 3p_3/2, Cu 3p, Cu 2p_3/2, Ge 3p and Ge 2p_3/2 standard peak areas, applying adequate ionization cross‐sections and mean free path lengths for different pass energies (10 and 50 eV), lens modes (large area, large area XL, small area 150) and x‐ray sources (Al/Mg Twin and Al Mono). In the energy range 200–1500 eV a transmission function T(E) = a₀ + b₁E (where a₀, b₁ and b₂ are variable parameters) was found to give an appropriate approximation for eight tested spectrometer settings, implementing the largest changes in the case of pass energy variations. Determination and application of the transmission functions were integrated in the XPS analysis software (UNIFIT 2004) and tested by means of an Ni90Cr10 alloy. The results demonstrate the practicability of the SSA and QPA methods, giving decreased errors of <8% in comparison with errors up to 38% obtained using Wagner's sensitivity factors. Copyright © 2005 John Wiley & Sons, Ltd.     

Copolymer of Di (methacryloyloxymethyl) naphthalene and divinylbenzene as a column packing for high-performance liquid chromatography

Summary A new porous polyaromatic ester packing was synthetized for high performance liquid chromatography. The relationship between retention and chain length of the members of homologous series of alkylbenzenes, N-alkylanilines, alkylarylethers, alkylbenzoates and alkylarylketones on this new stationary phase using different eluents was investigated. Using the alkylarylketone scale the retention indices of the homologues and test compounds were calculated. The results were compared with those obtained for poly (styrene-divinylbenzene) polymers. For both types of packing the first members of each homologous series gave non-linear behaviour. The methylene group index increments are different for the studied homologous series; thus there is no simple additivity of the retention indices. The efficiency of the porous polymeric columns is a function of the capacity factor of the solute and the organic component of the eluent.     

小波包去噪信号的分形特征

将分形理论与小波包滤波相结合，用盒维数的大小来评判信号曲线的滤波情况。随着小波包分解尺度的增大，滤波后信号曲线的盒维数逐渐减小，并最后趋于稳定值。因此可以根据盒维数-分解尺度曲线来选择最佳分解尺度。对仿真含噪信号进行了滤波实验，结果表明：即使在信噪比低至0．5时仍能得到较好的结果，并且该法用于毛细管电泳实验数据的处理结果同样令人满意。     

Quantitative surface analysis by Auger and x-ray photoelectron spectroscopy

Recent developments in quantitative surface analysis by Auger (AES) and x-ray photoelectron (XPS) spectroscopies are reviewed and problems relating to a more accurate quantitative interpretation of AES/XPS experimental data are discussed. Special attention is paid to consideration of elementary physical processes involved and influence of multiple scattering effects on signal line intensities. In particular, the major features of core-shell ionization by electron impact, Auger transitions and photoionization are considered qualitatively and rigorous approaches used to calculate the respective transition probabilities are analysed. It is shown that, in amorphous and polycrystalline targets, incoherent scattering of primary and signal Auger and photoelectrons can be described by solving analytically a kinetic equation with appropriate boundary conditions. The analytical results for the angular and energy distribution, the mean escape depth, and the escape probability as a function of depth of origin of signal electrons as well as that for the backscattering factor in AES are in good agreement with the corresponding Mote Carlo simulation data. Methods for inelastic background subtraction, surface composition determination and depth-profile reconstructions by angle-resolved AES/XPS are discussed. Examples of novel techniques based on x-ray induced photoemission are considered.     

密胺-脲甲醛树脂合成工艺放大研究

以密胺－脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。研究结果与小试研究的工艺条件相吻合。     

大型液相色谱分离过程FAD－SMT数学模型及其数值解

提出大型液相色谱分离过程ＦＡＤ－ＳＭＴ数学模型，把色谱分离连续性方程转变为对流扩散方程和常微分方程组，并提出模型的数值方法，分析了数值解的稳定条件和收敛条件以及空间和时间步长的选取。实验结果表明，ＦＡＤ－ＳＭＴ数学模型计算的液相色谱分离葡萄糖、果糖和分离甘露醇、山梨醇理论与实验流出曲线相吻合。灵敏度分析结果表明：相平衡常数比轴向扩散系数和总传质系数对色谱分离有较大的影响。     

Importance of the choice of assumptions and models in the estimation of analytical quality specifications

The validity of any model depends on its ability to imagine the situation or problem to which it is applied. Further, the assumptions made in relation to the model are determining for the actual outcome. Within the field of clinical biochemistry a lot of models for analytical quality specifications, based on a variety of concepts and ’clinical settings’, have been proposed. A hierarchical structure for application of these approaches and models has been agreed on at several occasions in 1999. In this hierarchy, the highest rank is given to evaluation of analytical quality specifications based on ’clinical settings’/’clinical outcome’ models, followed by specifications based on biological variation and on ’clinicians opinions’. This contribution, deals with the problems of combining random and systematic errors and the implications of application of different models to a variety of clinical settings. Received: 1 June, 2002 Accepted: 17 July 2002 Presented at the European Conference on Quality in the Spotlight in Medical Laboratories, 7–9 October 2001, Antwerp, Belgium