Uniform convergence of Galerkin‐multigrid methods for nonconforming finite elements for second‐order problems with less than full elliptic regularity

In this article we prove uniform convergence estimates for the recently developed Galerkin‐multigrid methods for nonconforming finite elements for second‐order problems with less than full elliptic regularity. These multigrid methods are defined in terms of the “Galerkin approach,” where quadratic forms over coarse grids are constructed using the quadratic form on the finest grid and iterated coarse‐to‐fine intergrid transfer operators. Previously, uniform estimates were obtained for problems with full elliptic regularity, whereas these estimates are derived with less than full elliptic regularity here. Applications to the nonconforming P₁, rotated Q₁, and Wilson finite elements are analyzed. The result applies to the mixed method based on finite elements that are equivalent to these nonconforming elements. © 2002 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 18: 203–217, 2002; DOI 10.1002/num.10004     

薄相屏闪烁的数值分析

本文在弱闪烁条件下，利用广泛适用于星际闪烁、行星际闪烁和电离层闪烁的薄相屏理论，以行星际闪烁为算例，对薄相屏闪烁进行了数值分析。结果表明：垂直于介质运动方向上的不规则结构的大小对闪烁有着重要的影响，直接表现在频谱的变化趋势和振荡幅度的不同。尤其是当小于Ｆｒｅｓｎｅｌ尺度时，数值计算表明此时没有闪烁发生。     

排气全燃型联合循环设计点性能简明估计公式

排气全燃型联合循环设计点性能简明估计公式蔡睿贤（中国科学院工程热物理研究所北京１０Ｏ０８０）关键词：排气全燃型联合循环，热力分析主要符号表Ｈｕ燃料热值Ｌ燃料理论空气量ｌ比功Ｐ单位能量价格Ｒ燃气轮机与蒸汽轮机的功率比α过量空气系数β摩尔燃料系数△增量η...     

Reactivity of a Ti–45.9Al–8Nb alloy in air at 700–900°C

A Ti–45.9Al–8Nb (at%) alloy with a lamellar structure (γ+α₂) was oxidised in air at 700, 800, 850 and 900°C in isothermal and thermal cycling conditions. The reaction progress was followed by thermogravimetric measurements. In isothermal conditions the oxidation kinetics followed approximately a parabolic rate law and the rate constants ranged from about 10^–12 kg² m^–4 s^–1 at 700°C to 10^–10 kg² m^–4 s^–1 at 900°C. The oxide scales were built of Al₂O₃ and TiO₂, the former being the main component of the outermost layer. The oxidation behaviour of Ti–45.9Al–8Nb was referred to a commercial titanium alloy, WT4 (Ti–6Al–1Mn), and selected oxidation-resistant alloys.     

Transient free‐surface flow of a viscoelastic fluid in a narrow channel

The interplay between inertia and elasticity is examined for transient free‐surface flow inside a narrow channel. The lubrication theory is extended for the flow of viscoelastic fluids of the Oldroyd‐B type (consisting of a Newtonian solvent and a polymeric solute). While the general formulation accounts for non‐linearities stemming from inertia effects in the momentum conservation equation, and the upper‐convected terms in the constitutive equation, only the front movement contributes to non‐linear coupling for a flow inside a straight channel. In this case, it is possible to implement a spectral representation in the depthwise direction for the velocity and stress. The evolution of the flow field is obtained locally, but the front movement is captured only in the mean sense. The influence of inertia, elasticity and viscosity ratio is examined for pressure‐induced flow. The front appears to progress monotonically with time. However, the velocity and stress exhibit typically a strong overshoot upon inception, accompanied by a plug‐flow behaviour in the channel core. The flow intensity eventually diminishes with time, tending asymptotically to Poiseuille conditions. For highly elastic liquids the front movement becomes oscillatory, experiencing strong deceleration periodically. A multiple‐scale solution is obtained for fluids with no inertia and small elasticity. Comparison with the exact (numerical) solution indicates a wide range of validity for the analytical result. Copyright © 2004 John Wiley & Sons, Ltd.     

钢卷尺刻度在线测量系

本文介绍了一种钢卷尺刻度在线测量系统 ,它采用了高速摄像及计算机数据处理技术 ,文章阐述了系统的非接触动态测量原理 ,描述了光电信号的处理方法 .     

Improved accuracy of quantitative XPS analysis using predetermined spectrometer transmission functions with UNIFIT 2004

The accuracy of quantitative XPS analysis can be improved using predetermined transmission functions. Two different calibration methods are used for estimating the transmission function T(E) of a photoelectron spectrometer, applying a survey spectra approach (SSA) and a quantified peak‐area approach (QPA) to minimize the quantification error. For the SSA method, Au, Ag and Cu spectra measured with the Metrology Spectrometer II have been used. The new QPA method was built up from Au 4f, Au 4d, Au 4p_3/2, Ag 3d, Ag 3p_3/2, Cu 3p, Cu 2p_3/2, Ge 3p and Ge 2p_3/2 standard peak areas, applying adequate ionization cross‐sections and mean free path lengths for different pass energies (10 and 50 eV), lens modes (large area, large area XL, small area 150) and x‐ray sources (Al/Mg Twin and Al Mono). In the energy range 200–1500 eV a transmission function T(E) = a₀ + b₁E (where a₀, b₁ and b₂ are variable parameters) was found to give an appropriate approximation for eight tested spectrometer settings, implementing the largest changes in the case of pass energy variations. Determination and application of the transmission functions were integrated in the XPS analysis software (UNIFIT 2004) and tested by means of an Ni90Cr10 alloy. The results demonstrate the practicability of the SSA and QPA methods, giving decreased errors of <8% in comparison with errors up to 38% obtained using Wagner's sensitivity factors. Copyright © 2005 John Wiley & Sons, Ltd.     

Copolymer of Di (methacryloyloxymethyl) naphthalene and divinylbenzene as a column packing for high-performance liquid chromatography

Summary A new porous polyaromatic ester packing was synthetized for high performance liquid chromatography. The relationship between retention and chain length of the members of homologous series of alkylbenzenes, N-alkylanilines, alkylarylethers, alkylbenzoates and alkylarylketones on this new stationary phase using different eluents was investigated. Using the alkylarylketone scale the retention indices of the homologues and test compounds were calculated. The results were compared with those obtained for poly (styrene-divinylbenzene) polymers. For both types of packing the first members of each homologous series gave non-linear behaviour. The methylene group index increments are different for the studied homologous series; thus there is no simple additivity of the retention indices. The efficiency of the porous polymeric columns is a function of the capacity factor of the solute and the organic component of the eluent.     

密胺-脲甲醛树脂合成工艺放大研究

以密胺－脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。研究结果与小试研究的工艺条件相吻合。     

大型液相色谱分离过程FAD－SMT数学模型及其数值解

提出大型液相色谱分离过程ＦＡＤ－ＳＭＴ数学模型，把色谱分离连续性方程转变为对流扩散方程和常微分方程组，并提出模型的数值方法，分析了数值解的稳定条件和收敛条件以及空间和时间步长的选取。实验结果表明，ＦＡＤ－ＳＭＴ数学模型计算的液相色谱分离葡萄糖、果糖和分离甘露醇、山梨醇理论与实验流出曲线相吻合。灵敏度分析结果表明：相平衡常数比轴向扩散系数和总传质系数对色谱分离有较大的影响。