分布变点模型的非参数检验和区间估计

提 要设　是定义在［０,１］上的随机过程Ｘ（ｔ）的ｎ个等距独立观察值,其中,　服从公共连续分布Ｆ;,服从公共连续分布 Ｆ＊,Ｆ与Ｆ＊不同;其中,是过程 Ｘ（ｔ）的变点．用ＣＵＳＵＭ及Ｂｒｏｗｎｉａｎ Ｓｈｅｅｔ方法给出了检测变点τ位置的一个程序,并证明了所得结果是强相合的;同时也讨论了τ的假设检验和区间估计．     

鲁棒的车载红外视频电子稳像算法

针对车辆行进中,红外热像仪拍摄的视频序列存在复杂的随机抖动,提出基于BRISK特征点匹配的运动估计算法,计算出高精度全局运动矢量,同时对于特征点匹配时出现误匹配及场景中存在前景运动物体的情况,采用模糊聚类法分离全局运动和局部运动,提高了算法的鲁棒性。提出了基于Kalman粒子滤波算法,有效实现了复杂扫描运动和随机抖动的分离,并利用双线性插值法进行图像补偿。采用快速图像拼接法进行未定义区域处理,实现了图像全景输出。还利用车载红外热像仪实际拍摄的红外视频进行了稳像实验。实验结果表明,视频序列获得了很好的稳像效果,能够满足实际应用要求。     

The impact of human activity patterns on asymptomatic infectious processes in complex networks

The study of the impact of human activity patterns on network dynamics has attracted a lot of attention in recent years. However, individuals’ knowledge of their own physical states has rarely been incorporated into modeling processes. In real life, for certain infectious processes, infected agents may not have any visible or physical signs and symptoms; therefore, they may believe that they are uninfected even when they have been infected asymptomatically. This infection awareness factor is covered neither in the classical epidemic models such as SIS nor in network propagation studies. In this article, we propose a novel infectious process model that differentiates between the infection awareness states and the physical states of individuals and extend the SIS model to deal with both asymptomatic infection characteristics and human activity patterns. With regards to the latter, we focus particularly on individuals’ testing action, which is to determine whether an individual is infected by an epidemic. The simulation results show that less effort is required in controlling the disease when the transmission probability is either very small or large enough and that Poisson activity patterns are more effective than heavy-tailed patterns in controlling and eliminating asymptomatic infectious diseases due to the long-tail characteristic.     

夹持方式和加工误差对大口径薄型KDP晶体附加面形的影响

惯性约束聚变频率转换系统中,大口径薄型KDP晶体的面形质量是影响频率转换效率能否达到设计要求的关键因素之一。针对45放置状态下口径为400 mm400 mm的三倍频KDP晶体,采用ANSYS有限元分析软件,建立了不同夹持方式和具有不同加工误差的KDP晶体模型和夹具模型,分析了加工误差对不同夹持方式下KDP晶体附加面形的影响,给出了不同加工误差和不同夹持情况下,KDP晶体附加面形的P-V值和RMS值。研究结果表明,夹持方式和加工误差是引起KDP晶体附加面形变化的重要因素,正面压条夹持方式即使在晶体和夹具存在加工误差时也可以较好地控制晶体的附加面形。     

高功率可变脉宽辐射系统

介绍了一种应用在高功率VHF频段可变脉冲产生及辐射系统的组成。在实验室条件下,通过优化设计、调节实现了数ns至数十ns脉冲宽度辐射输出。利用开路容性天线加载可调电感原理,达到辐射脉冲宽度可变的目的,同时通过并联引入耗能大电感,实现减少辐射脉冲拖尾,增加系统效率的功能;并利用高能量、快脉冲电源为种子电源,为放电回路进行储能放电,利用这一体制减小了系统辐射脉冲间的同步抖动。     

气体分子碰撞的模型无关分析

本文纯粹基于统计平均的思想,模型无关分析导出了气体分子的碰壁数和平均碰撞频率.     

Effect of bias in ferroelectric-antiferroelectric relaxation

The ferroelectric-antiferroelectric transition in greyscale generation of antiferroelectric liquid crystal displays (AFLC) is a heterogeneous process. The process has been described as the growth of finger-like domains [1]. We have previously studied the ferroelectric-antiferroelectric phase transition, relaxation that follows the data pulse in surface stabilized asymmetric antiferroelectric liquid crystal displays using biasless video frequency waveforms [2]. This relaxation involves an intensity decay of the light transmitted by a pixel and depends on several parameters such as surface stabilization, rotational viscosity of the AFLC, magnitude of the data pulse, and bias voltage. The usual multiplexed driving of AFLC displays leads to long-term stabilisation of the grey levels induced by the data pulses within the selection time. However, depending on the bias level, alternative greyscale mechanisms may be obtained by allowing the grey levels to decay during the frametime. These greyscales may be advantageous in some instances since they improve the dynamic response of the AFLC device and reduce the reset time of the waveform. In this study we extend the previous work to include the effect of bias. We present the measured data, in terms of growth pattern and speed and present an extension of the previously model on order to explain the results.     

啁啾脉冲堆积及其放大特性

根据啁啾脉冲堆积的原理以及模型介绍了两路脉冲堆积时脉冲的时间与频谱特性,分析了堆积脉冲产生时间与频谱调制,以及交叠区产生非线性频率啁啾的原因。通过非线性薛定谔方程,分析了堆积脉冲的放大特性,介绍了啁啾参量对放大结果的影响以及放大后堆积脉冲的频率啁啾的变化。研究表明,在堆积脉冲的放大过程中自相位调制效应非常明显,严重影响了脉冲的频谱与频率啁啾。     

非时齐扩散模型中时变参数的局部线性估计

本文主要研究非时齐扩散模型中时变的漂移参数和扩散参数的局部线性估计。基于非时齐扩散模型的离散观测样本,首先得到了漂移参数的局部线性估计及其标准误差。然后,考虑到扩散参数的非负性,本文利用局部对数线性拟合的方法得到了扩散参数的核函数加权估计,并讨论了扩散项估计的渐近偏差、渐近方差和渐近正态性。最后,通过模拟研究表明所得局部估计有很好的拟合效果。     

1.2 MV重复频率脉冲电源的测试诊断系统

为了更好分析系统的放电特性和工作状态,优化脉冲功率源系统的设计,研制了一套1.2 MV重复频率高功率微波驱动电源测试诊断系统。通过研究高电压、大电流测试技术和数据采集、信号处理、故障诊断技术,同时运用虚拟仪器和电磁兼容等技术,探索开发了一套重复频率脉冲电压电流测试诊断系统。结合系统的研制需求,通过分析各种数据采集设备的优缺点,硬件选用了凌华公司的PXI数据采集系统,软件采用LabVIEW,设计开发了重复频率快信号的采集诊断程序,研制出实时诊断系统,并在1.2 MV重复频率脉冲电源系统中应用,实现了对重复频率电源关键点电压电流的测试以及数据的诊断、处理和远程在线监测,出现故障时报警、存储数据并自动断电等功能。