Epitaxial growth of borophene on substrates

Borophene, a two-dimensional (2D) planar boron sheet, has attracted dramatic attention for its unique physical properties that are theoretically predicted to be different from those of bulk boron, such as polymorphism, superconductivity, Dirac fermions, mechanical flexibility and anisotropic metallicity. Nevertheless, it has long been difficult to obtain borophene experimentally due to its susceptibility to oxidation and the strong covalent bonds in bulk forms. With the development of growth technology in ultra-high vacuum (UHV), borophene has been successfully synthesized by molecular beam epitaxy (MBE) supported by substrates in recent years. Due to the intrinsic polymorphism of borophene, the choice of substrates in the synthesis of borophene is pivotal to the atomic structure of borophene. The different interactions and commensuration of borophene on various substrates can induce various allotropes of borophene with distinct atomic structures, which suggests a potential approach to explore and manipulate the structure of borophene and benefits the realization of novel physical and chemical properties in borophene due to the structure–property correspondence. In this review, we summarize the recent research progress in the synthesis of monolayer (ML) borophene on various substrates, including Ag(1 1 1), Ag(1 1 0), Ag(1 0 0), Cu(1 1 1), Cu(1 0 0), Au(1 1 1), Al(1 1 1) and Ir(1 1 1), in which the polymorphism of borophene is present. Moreover, we introduce the realization of bilayer (BL) borophene on Ag(1 1 1), Cu(1 1 1) and Ru(0 0 0 1) surfaces, which possess richer electronic properties, including better thermal stability and oxidation resistance. Then, the stabilization mechanism of polymorphic borophene on their substrates is discussed. In addition, experimental investigations on the unique physical properties of borophene are also introduced, including metallicity, topology, superconductivity, optical and mechanical properties. Finally, we present an outlook on the challenges and prospects for the synthesis and potential applications of borophene.     

Annulation of Alkynyl Aryl Ethers with Allyl Pivalates To Give 2,3‐Bismethylenechromanes through Double C−H Bond Cleavage

The treatment of silylethynyloxyarenes with allylic pivalates in the presence of a palladium catalyst led to efficient C?H bond cleavage in both substrates and a novel annulation reaction to give 2,3‐bismethylenechromanes. When ortho‐allylated silylethynyloxybenzenes were used as the substrates, the same products were obtained. This result shows that site‐selective intramolecular hydrovinylation is involved in the annulation reaction. The synthetic utility of the products was demonstrated by the construction of condensed polycycles.     

在金属基片上激光沉积YBCO超导薄膜

介绍了在金属基片上激光沉积缓冲层和ＹＢａ２Ｃｕ３ｏ７－ｘ（ＹＢＣＯ）高温超导薄膜的研究结果。在带ｙｔｔｒｉａ－ｓｔａｂｉｌｉｚｅｄ－ｚｉｒｃｏｎｉａ（ＹＳＺ）缓冲层的ＮｉＣｒ合金基片上,激光原位沉积出ＹＢＣＯ超导薄膜,薄膜的零电阻转变温度度４８Ｋ,７７Ｋ时临界电流密度约为２００Ａ／ｃｍ＾２;缓冲层的取向可以通过选择适当的沉积参数来改善;用扫描隧道电子显微镜对ＹＢＣＯ薄膜的微观结构分析表明：完善的螺     

有机相中脂肪酶催化合成乳酸乙酯

 考察了在双底物抑制下脂肪酶催化合成乳酸乙酯,最佳溶剂为叔丁醇,在所选的几种脂肪酶中,固定化于大孔丙烯酸树脂的南极假丝酵母脂肪酶B (Novozym 435)的催化活性最好. 对反应条件进行了优化,当酸醇摩尔比为1∶8, 反应温度60 ℃, 酸浓度0.3 mol/L, 酶浓度45 g/mol, 摇床转速200 r/min时产率达到77%, 脂肪酶Novozym 435重复使用6次后产率仍然可达到60%.     

Wet-chemical treatment and electronic interface properties of silicon solar cell substrates

On textured n-type silicon substrates for solar cell manufacturing, the relation between light trapping behavior, structural imperfections, energetic distribution of interface state densities and interface recombination losses were investigated by applying surface sensitive techniques. The field-modulated surface photovoltage (SPV), in-situ photoluminescence (PL) measurements, total hemispherical UV-NIR-reflectance measurements and electron microscopy (SEM) were employed to yield detailed information on the influence of wet-chemical treatments on preparation induced micro-roughness and electronic properties of polished and textured silicon substrates. It was shown that isotropic as well as anisotropic etching of light trapping structures result in high surface micro-roughness and density of interface states. Removing damaged surface layers in the nm range by wet-chemical treatments, the density of these states and the related interface recombination loss can be reduced. In-situ PL measurements were applied to optimise HF-treatment times aimed at undamaged, oxide-free and hydrogen-terminated substrate surfaces as starting material for subsequent solar cell preparations.      

金属有机物化学气相沉积法生长Ga2（1-x）In2xO3薄膜的结构及光电性能研究

采用金属有机物化学气相沉积（MOCVD）法在蓝宝石（0001）衬底上制备出了Ga_2（1-x）In_2xO₃（x=01—09）薄膜,研究了薄膜的结构、电学和光学特性以及退火处理对薄膜性质的影响.测量结果表明：当In组分x=02时,样品为单斜β-Ga₂O₃结构;x=05的样品,薄膜呈现非晶结构,退火处理后薄膜结构得到明显的改善 关键词： 金属有机物化学气相沉积 2（1-x）In_2xO₃薄膜')" href="#">Ga_2（1-x）In_2xO₃薄膜 蓝宝石衬底 退火     

Formation of SERS-active silver structures on the surface of mesoporous silicon

We have optimized the procedure for preparation of nanostructured silver films on the surface of mesoporous silicon (PSi) to use them as active substrates in surface-enhanced Raman scattering (SERS) spectroscopy. The greatest enhancement of the SERS signal was observed for samples obtained when the silver was deposited on PSi from an aqueous AgNO₃ solution with concentration 1⋅10^–2 M over a 10–15 minute period. The detection limit for rhodamine 6G on SERS-active substrates prepared by the optimized procedure was 1⋅10^–10 M. The enhancement factor for the SERS signal on these surfaces was estimated as ≈2⋅10⁸. We have shown that SERS-active substrates based on mesoporous silicon are promising for detection and study of complex organic compounds, in particular tetrapyrrole molecules. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 76, No. 2, pp. 298–306, March–April, 2009.     

Improved surface-enhanced Raman scattering on optimum electrochemically roughened silver substrates

In this work, the effects of preparation conditions used in roughening silver substrates by electrochemical triangular-wave oxidation-reduction cycles (ORC) on surface-enhanced Raman scattering (SERS) were first investigated. The optimum roughening conditions for obtaining strongest SERS of Rhodamine 6G (R6G) are as follows. Ag electrodes were cycled in deoxygenated aqueous solutions containing 0.1 M NaCl from −0.3 to +0.2 V versus Ag/AgCl at 25 mV s⁻¹ for five scans. The SERS of R6G adsorbed on this optimum procedure-prepared roughened Ag substrate exhibits a higher intensity by one order of magnitude, as compared with that of R6G adsorbed on a normally roughened Ag substrate.     

Cold isostatic pressing technique for producing highly efficient flexible dye‐sensitised solar cells on plastic substrates

One of the biggest challenges for making dye‐sensitised solar cells (DSCs) on plastic substrates is the difficulty in making good quality nanoporous TiO₂ films with both good mechanical stability and high electrical conductivity. Cold isostatic pressing (CIP) is a powder compaction technique that applies an isostatic pressure to a powder sample in all directions. It is particularly suitable for making thin films on plastic substrates, including non‐flat surfaces. Cold isostatically pressed nanocrystalline TiO₂ electrodes with excellent mechanical robustness were prepared on indium tin oxide (ITO)‐coated polyethylene naphthalate (PEN) substrates in the absence of organic binders and without heat treatment. The morphology and the physical properties of the TiO₂ films prepared by the CIP method were found to be very compatible with requirements for flexible DSCs on plastics. This room‐temperature processing technique has led to an important technical breakthrough in producing high efficiency flexible DSCs. Devices fabricated on ITO/PEN films by this method using standard P‐25 TiO₂ films with a Ru‐complex sensitiser yielded a maximum incident photon‐to‐current conversion efficiency of 72% at the wavelength of 530 nm and showed high conversion efficiencies of 6.3% and 7.4% for incident light intensities of 100 and 15 mW cm⁻², respectively, which are the highest power conversion efficiencies achieved so far for any DSC on a polymer substrate using the widely used, commercially available P‐25 TiO₂ powder. Copyright © 2011 John Wiley & Sons, Ltd.     

Thin film substrates from the Raman spectroscopy point of view

We have investigated ten standard single crystal substrates of complex oxides on the account of their applicability in the Raman spectroscopy‐based thin film research. In this study, we suggest a spectra normalization procedure that utilizes a comparison of the substrate's Raman spectra to those of well‐established Raman reference materials. We demonstrate that MgO, LaGaO₃, (LaAlO₃)_0.3(Sr₂AlTaO₆)_0.7 (LSAT), DyScO₃, YAlO₃, and LaAlO₃ can be of potential use for Raman‐based thin film research. At the same time TiO₂ (rutile), NdGaO₃, SrLaAlO₄, and SrTiO₃ single crystals exhibit multiple phonon modes accompanied by strong Raman background that substantially hinder Raman‐based thin film experiments. Copyright © 2014 John Wiley & Sons, Ltd.