Indirect voltammetric detection of fluoride ions in toothpaste on a comb-shaped interdigitated microelectrode array

A novel technique based on dynamic electrochemistry for the detection of fluoride ions was developed. It is based on its strong complexation with ferric ion. Formed fluoroferric complex is cathodically inactive at the potential of the reduction of free ferric aquo ion. The voltammetric and amperometric response of platinum comb-shaped interdigitated microelectrode array is decreased after fluoride addition. This decrease serves for the quantification of fluoride ions added to the solution. The detection limit of 4.5 × 10⁻⁵ mol dm⁻³ was achieved when one of the segments of interdigitated microelectrode array (IDA) was used as an indicating electrode. The detection limit is about one order of magnitude lower than in the case of conventional platinum macroelectrode. In comparison with ISE electrodes this method is faster and also avoiding large error resulting from the antilogarithmization of ISE Nerstian response. The method was applied to the analysis of toothpaste.     

Method of gas mixtures discrimination based on sensor array, temporal response and data driven approach

This work presents a method of gas mixtures discrimination. The principal concept of the method is to apply measurement data provided by a combination of sensors at single time point of their temporal response as input of the discrimination models. The pattern data combinations are selected for classes of target gases based on the criterion of 100% efficient discrimination. Combinations of sensors and time points, which provide pattern data combinations in course or repeated measurements, are encoded in the form of addresses. The designer of sensor system is responsible for their selection and they are included in the software of the final instrument. The study of the method involved the discrimination of gas mixtures composed of air and single chemical: hexane, ethanol, acetone, ethyl acetate and toluene. Two sensor arrays were utilized. Each consisted of six TGS sensors of the same type. The dynamic operation of sensors was employed. As an example the stop-flow mode was chosen. The work provides the evidence of the existence of sensor combinations and time points, which are successful in discrimination of studied classes of target gases. The persistence of addresses was discussed considering the ability of sensor array to recognize analytes, variability of repeated measurement results, number of repeated measurements and a twin sets of sensors. Altogether, the validity of the method was demonstrated.     

以泡沫镍载NiCo2O4纳米线阵列为阴极催化剂的Al-H2O2半燃料电池

研究了以泡沫镍载NiCo2O4纳米线阵列为阴极催化剂的Al-H2O2半燃料电池的性能. 以无模板生长法制备了泡沫镍载NiCo2O4纳米线阵列阴极材料, SEM测定结果表明, NiCo2O4纳米线几乎垂直于泡沫镍载体表面生长. 以电压和功率密度-电流密度曲线研究了H2O2浓度、电解液流速和温度对电池性能的影响, 结果显示, 以铝片为阳极, 0.6 mol/L H2O2为氧化剂的电池的开路电压约为1.40 V; 在室温和57 ℃下, 电流密度为98和172 mA/cm2时, 最大功率密度分别达到79和120 mW/cm2.  在5000 s的测试时间内, 0.70 V的恒电流密度和75 mA/cm2 的恒电压值几乎为一常数, 这表明以泡沫镍载NiCo2O4纳米线阵列为催化剂电还原H2O2具有很好的活性、稳定性和传质性能.     

多波长薄层扫描分析非那西丁和咖啡因

将阵列感光的光纤光谱仪与二维电移平台结合,完成多波长薄层反射扫描定量,提供二阶张量数据输出.设计的仪器采取“弓”形二维移动扫描,探头与薄层板间距2mm,能在200ms积分时间内同时获取紫外—近红外2048个波长响应值,利用Kubelka-Munk函数积分值定量,提高了薄层扫描定量的线性度和准确度,检出范围覆盖纳克到毫克...     

不同形态铈改性的TiO2纳米管阵列的制备及其可见光光电响应性质

采用电化学阴极还原和阳极氧化法,制备了还原态铈和氧化态铈改性的TiO2纳米管阵列,通过扫描电子显微镜(SEM)和X射线衍射(XRD)表征样品形貌和晶相,得出还原态铈以单质铈纳米纤维形式存在于TiO2纳米管内及表面,单质铈改性的TiO2纳米管经阳极氧化后,以CeO2和单质Ce形式共存.测定样品的光电流响应并计算样品的能带宽度.结果表明:单质铈改性的TiO2纳米管阵列在可见光区光电流响应较TiO2纳米管增强,单质铈添加存在最佳值,在10 mmol·L-1溶液中制备的单质铈改性的TiO2纳米管阵列光电流响应最强,能带宽度E9减少到2.88 eV,并且随着单质铈含量的增加,载流子浓度增大,且平带电位向负向移动.单质铈改性的样品经阳极氧化后,样品在紫外光区和可见光区光电流响应都增强,但其在可见光区的响应强度要小于单质铈改性的TiO2纳米管在可见光区的响应强度.     

高效液相色谱法测定化妆品中10种限用物质

建立了乙腈超声提取、高效液相色谱/二极管阵列检测快速测定化妆品中的氢醌、水杨酸、苯酚、苯氧乙醇、对羟基苯甲酸甲酯、对羟基苯甲酸乙酯、对羟基苯甲酸丙酯、对羟基苯甲酸丁酯、双氯酚、三氯生10种限用物质含量的分析方法.对提取方法、液相色谱条件和检测条件进行了优化,10种限用物质标准溶液的线性范围为0.01～0.1g/L,50...     

Enhanced Electron Transfer Rates by AC Voltammetry for Ferrocenes Attached to the End of Embedded Carbon Nanofiber Nanoelectrode Arrays

The effect of the interior structure of carbon nanomaterials on their electrochemical properties is not well understood. We report here the electron transfer rate (ETR) of ferrocene (Fc) molecules covalently attached to the exposed end of carbon nanofibers (CNFs) in an embedded nanoelectrode array. The ETR in normal DC voltammetry was found to be limited by the conical graphitic stacking structure interior of CNFs. AC voltammetry, however, can cope with this intrinsic materials property and provide over 100 times higher ETR, likely by a new capacitive pathway. This provides a new method for high‐performance electroanalysis using CNF nanoelectrodes.     

Orthogonal array design for the optimization of ionic liquid-based dispersive liquid-liquid microextraction of benzophenone-type UV filters

In the present study, dispersive liquid-liquid microextraction (DLLME) using an ionic liquid (IL) as the extractant was successfully developed to extract four benzophenone-type UV filters from the different water matrices. Orthogonal array experimental design (OAD), based on five factors and four levels (L(16)(4(5))), was employed to optimize IL-dispersive liquid-liquid microextraction procedure. The five factors included pH of sample solution, the volume of IL and methanol addition, extraction time and the amount of salt added. The optimal extraction condition was as follows. Sample solution was at a pH of 2.63 in the presence of 60 mg/mL sodium chloride; 30 μL IL and 15 μL methanol were used as extractant and disperser solvent, respectively; extraction was achieved by vortexing for 4 min. Using high-performance liquid chromatography-UV analysis, the limits of detection of the target analytes ranged between 1.9 and 6.4 ng/mL. The linear ranges were between 10 or 20 ng/mL and 1000 ng/mL. This procedure afforded a convenient, fast and cost-saving operation with high extraction efficiency for the model analytes. Spiked waters from two rivers and one lake were examined by the developed method. For the swimming pool water, the standard addition method was employed to determine the actual concentrations of the UV filters.     

Derivative spectrum chromatographic method for the determination of trimethoprim in honey samples using an on-line solid-phase extraction technique

A simple, selective and rapid analytical method for determination of trimethoprim (TMP) in honey samples was developed and validated. This method is based on a SPE technique followed by HPLC with photodiode array detection. After dilution and filtration, aliquots of 500 μL honey samples were directly injected to an on-line SPE HPLC system. TMP was extracted on an RP SPE column, and separated on a hydrophilic interaction chromatography column during HPLC analysis. At the first detection step, the noise level of the photodiode array data was reduced with two-dimensional equalizer filtering, and then the smoothed data were subjected to derivative spectrum chromatography. On the second-derivative chromatogram at 254 nm, the limit of detection and the limit of quantification of TMP in a honey sample were 5 and 10 ng/g, respectively. The proposed method showed high accuracy (60-103%) with adequate sensitivity for TMP monitoring in honey samples.     

Center problem and bifurcation behavior for a class of quasi analytic systems

Results about the study of nonanalytic systems’ center-focus and bifurcations of limit cycles are hardly seen in published references up till now. In this paper, we investigated the problems of determining center or focus and bifurcations for a class of planar quasi cubic analytic systems. The recursive formula to figure out generalized focal values is given, ulteriorly the conditions for four limit cycles from the origin or the point at infinity are obtained and center problems are considered. What is worth pointing out is that we offer a kind of interesting phenomenon that the exponent parameter λ control the non-analyticity of studied system (3.8) in this paper. In terms of nonanalytic differential systems, our work is new.