基于无线传感器网络的智能灌溉系统研究

针对我国水资源紧缺以及农田节水灌溉的需求,根据现有的农田灌溉装备条件,应用领域作物、土壤、水源布点等情况,分析了目前实现精确农业亟待解决的关键技术问题,提出一套采用无线传感器网络技术、适合大面积农田智能灌溉控制方法。分析结果表明,该系统通过无线传感技术完成智能化灌溉,可很好地实现节水。且该系统工作稳定,具有一定的推广应用价值。     

基于经验模态分解的SO_2浓度检测信号处理方法

荧光法测量SO2浓度是大气监测中常用的检测手段.双光路技术可以消除光源和光路的噪音干扰,但光电转换器件在激发光照射下产生的背景噪音也会影响定量分析的准确度.本文采用经验模态分解滤波算法降低检测中存在的各种噪音,在实现有效降噪的基础上较好地保存了有用的原始信号.仿真结果表明,针对SO2浓度检测系统,利用经验模态分解去噪后信号的信噪比达到204.273 6,均方误差为0.007 0.与小波去噪法相比,经验模态分解检测效果更佳.最后将经两组不同方法处理后的信号应用于气体检测系统中,实验数据的线性关系更好地验证了经验模态分解方法应用到浓度检测系统的可行性.     

镉(Ⅱ)的共振散射光谱研究及应用

由于镉在环境中具有高毒性和生物蓄积性,对人体和环境会产生巨大的危害,因而测定其在环境中的浓度是十分必要的。本研究基于镉（Ⅱ）-蛋白质-刚果红体系的共振瑞利散射和共振非线性散射光谱建立了测定环境水样中微量镉（Ⅱ）的新方法。在pH=4的BR缓冲溶液中,镉（Ⅱ）与牛血清白蛋白溶液及刚果红溶液反应生成三元离子缔合络合物,使该体系中的共振瑞利散射（RRS）、二级散射（SOS）和倍频散射（FDS）信号明显增强,其最大散射波长分别位于波长560 nm（RRS）、690 nm（SOS）和352 nm（FDS）处。在优化的实验条件下,ΔI与镉（Ⅱ）浓度在一定范围内呈现良好的线性关系,检出限分别为0.31 μg/L（RRS）、0.29 μg/L（SOS）、0.34 μg/L（FDS）。将该方法用于实验室废水、涪江河水和农夫山泉中镉（Ⅱ）的测定,水样中镉（Ⅱ）的回收率在93.2%~107.7%之间,相对标准偏差在0.8%~3.1%之间,取得了较理想的结果。     

基于布拉格光栅的边坡监测实验研究

提出了一种基于分布式光纤光栅的边坡监测与报警系统.根据强度折减法,利用ANSYS软件分析出边坡的软弱面及滑体所在的具体位置,从而在该处安装经过特殊封装的拉线式光纤光栅位移传感器.滑体的位移通过拉线转换为作用在光栅上的应力,而光纤光栅反射波长与应变具有良好的线性关系,因此通过检测光栅反射光的中心波长的偏移量,就可以解调出...     

网络行为建模环境的实现及网络混沌性状分析

设计并实现了一种用于网络行为研究的网络行为建模环境，将网络环境的监测功能和网络行为的分析功能相互结合，为网络系统行为的研究奠定了基础。在这一环境下，归纳了四种有普遍意义的网络突发流量模型，并用混沌分形理论中的迭代函数系统和相空间重构方法对它们进行描述、分析、计算和重构，得到了它们的分形维以及能体现网络流量行为特性的宏观参数。     

红外光谱法测量城市空气中CH4浓度

利用自行组建的开放光路傅里叶变换红外光谱测量系统对北京燕山石化地区大气中的甲烷进行了连续监测,对测量光谱进行了浓度反演,并对浓度结果做了简单分析。实验表明,该测量系统性能稳定,能以非接触的方式对空气中多种气体进行连续在线监测,能及时反应测量区域内污染信息,较好地适应工业上气体污染监测的需要。     

基于虚拟仪器的污水水质在线监测系统

为了监测生产和生活中的污水排放情况,通过对虚拟仪器的介绍,应用LabVIEW软件稳定快速地对污水的流量、液位、温度、pH、BOD、COD、TOC、TOD、氨氮和总磷等各个参数进行基于无线网络的数据采集,然后在数据中心进行实时显示和综合分析,为污水水质的在线监测提供了一整套完整可靠的系统.经测试,系统运转良好,达到了预期...     

Comparison of the effectiveness of epoxy cure accelerators using a fluorescent molecular probe

A simple optical method for quantitative comparison of the effectiveness of epoxy cure accelerators, used for speeding up the crosslinking process of epoxy resins with cyclic anhydrides, is described. Fluorescent molecular probes and a miniature fiber optic spectrometer have been applied for measurement of the cure kinetics of a model epoxy resin/anhydride composition in the presence of various cure accelerators. A quantitative index of accelerator performance has been determined for several of the most common accelerators.     

Adoption of Common Schemes for Single and Sequential Extractions of Trace Metal in Soils and Sediments

Abstract

The various methods for determining the mode of occurrence of trace metals in sediments and soils have a long history which dates back to the determinations of the availability of metals for plant nutrition performed earlier. Various methods have been developed in the 70′s and 80′s dealing with both single and sequential extraction schemes. Although some schemes received wide acceptance, none of them developed into a commonly accepted procedure. As a result, the information obtained was site-specific and the interpretation of the results scientist-specific. The workshop on single and sequential extraction in sediments and soils held at Sitges     

Monitoring of Airborne Organic Vapors Using Ion Mobility Spectrometry

Abstract

Automated, continuous monitoring of organic vapors in air under three field designs for plume drift was demonstrated using a hand-held ion mobility spectrometer (IMS) in characterizing IMS behavior as a point sensor. In one field study, the IMS was placed 50cm from a 9m² grass plot contaminated with methylsalicylate and response to airborne vapors was recorded during a 13hr period of atmospheric turbulence to illustrate susceptibility of point sensors to wind direction. A similar study under near-quiescent atmospheric conditions was made using dimethylsulfoxide. In a third study, the plume from a point source of dipropyleneglycolmonomethylether was interrogated over a 25m × 12m grid downwind with windspeeds of 6–18km h^?. Laboratory studies were used to measure instrumental response times and influences from potentially interfering atmospheric organic pollutants.