The use of silicon in the preparation of apolar glass capillary columns

As an extention of previous reports, variables affecting the performance of columns modified by silicon deposition have been optimized. The aim of this work was to produce thermostable apolar glass capillary columns regardless of the glass type used and to maintain column performance under stressful conditions. The main parameters studied were the influence of glass type, leaching effects, and silicon layer thickness on column activity. Deactivation and stationary phase conditions were held constant. Both coated and uncoated columns were tested. The thickness of the silicon layer was found to be relatively unimportant. There was no difference whether soft glass or borosiiicate glass was used and leaching before silicon deposition did not influence column activity. Bare silicon surfaces showed considerable activity especially in respect to interactions with free acids and bases. There are indications that the surface consists of silicon oxide and other oxygenated forms of silicon rather than of the element. Treatment of the silicon layers with dilute hydrofluoric acid and the strict exclusion of traces of oxygen and water did not improve the situation. In spite of such specific interactions, silicon surfaces were easily deactivated by heat treatment with polysiloxanes. Silicon surfaces deactivated by baking with octamethyltetrasiloxane at 400°C are inert and temperature stable and show characteristics similar to persilylated surfaces.     

Electron beam pretreatment of sewage sludge before anaerobic digestion

The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately 30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation. A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation. Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k ₁ and k ₂). Most initial decay reaction accelerated within 10 d, with an average k ₁ of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient (k ₂) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron beam pretreatment could reduce the reactor solid retention time by half.     

A practical approach to the implementation of autoverify

Autoverification is a process in which computer software will automatically evaluate laboratory test results, verify result integrity, and then release the results to the hospital interface without any technologist intervention. Autoverify release criteria are user defined and can be customized. The process of developing, implementing, and monitoring autoverify is achievable for most test results in laboratory medicine. The use of autoverification will improve result quality, increase revenue, and create faster turn-around times. All of this put together will ultimately lead to improved customer satisfaction. Computers and autoverification are survival tools in the competitive market of laboratory diagnostics services.Presented at the 8th Conference on Quality in the Spotlight, 17–18 March 2003, Antwerp, Belgium     

Tamarindus indica mucilage and its acrylamide-grafted copolymer as flocculants for removal of dyes

The application of Tamarindus indica seed mucilage (Tam), a food grade polysaccharide, and its acrylamide grafted copolymer as flocculants was assessed for the first time for removal of various types of dyes from model textile wastewater containing azo, basic, and reactive dyes. Acrylamide grafted T. indica mucilage (Tam-g-PAM) was obtained by ceric ion initiated polymerization technique. A series of contact time experiments were conducted to assess the system variables such as concentrations of mucilage and dyes and pH. These flocculants reduce the dye concentration by flocculation and settling. The grafted copolymer, Tam-g-PAM showed better results for dye removal. The optimal flocculant concentration, which was required to effect flocculation, was independent of dye concentration within the range examined. Both the flocculants performed better for removal of azo dyes than for reactive and basic dyes.     

Profiling and comprehensive expression analysis of ABC transporter solute-binding proteins of Bacillus subtilis membrane based on a proteomic approach

We analyzed ABC transporter solute-binding proteins (SBPs) of the Bacillus subtilis membrane using a proteomic approach. We prepared a washed cell membrane fraction that was insoluble in 134 mM nondetergent sulfobetaine and then extracted proteins using mixtures of detergents in a stepwise manner. The membrane proteins were resolved by three two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) or two one-dimensional (1-D) PAGE procedures, electroblotted, and digested in the presence of 5% or 80% acetonitrile. Thereafter, matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF MS) identified 637 proteins corresponding to 15.9% of the total cellular proteins. We predicted that among these, 256 were membrane proteins, 101 were lipoproteins or secretory proteins and 280 were soluble proteins containing peripheral proteins that function in both the cytoplasm and the cell membrane such as SecA and FtsY. Among the 637 proteins, we identified 30 SBPs among 38 importers predicted by a bioinformatic search of the genome. We confirmed expression of the genes for the 30 SBPs using DNA microarray analysis. We compared the 2-D gel separation profiles of submembrane fractions solubilized by 1% n-dodecyl-beta-D-maltoside from cells cultured on Luria Bertani (LB), S7, and S7 medium without glutamate as well as DNA microarray data on LB and S7. The results suggested that YcdH, YtmK and YurO are binding proteins for Mn(++), glutamate and glucose, respectively, and that YqiX and YxeM are binding proteins for amino acids (tryptophan in S7 medium).     

In-gel deglycosylation of sodiumdodecyl sulfate polyacrylamide gel electrophoresis-separated glycoproteins for carbohydrate estimation by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Mass determination by mass spectrometric methods (electrospray ionization mass spectrometry (ESI-MS), matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS)) of sodiumdodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE)-separated proteins is a well known procedure and reliable protocols are available. In our efforts to use the established methods to determine the molecular mass of the disulfide bridged, heterodimeric glycoprotein GP3 and to determine the carbohydrate content of each protein subunit we developed an in-gel chemical deglycosylation method. For this purpose we established experimental conditions that allow maximum extraction of the high molecular mass protein subunits and developed a routine method to apply the HF-pyridine deglycosylation protocol to proteins isolated from polyacrylamide gel pieces. The novel protocol and extraction procedure described can be used to analyze O-glycosylated proteins up to 150 kDa after SDS-PAGE separation.     

Effects of different alkali metal ions on the cationization of poly(ethylene glycol)s in matrix-assisted laser desorption/ionization mass spectrometry: a new selectivity parameter

The cationization of poly(ethylene glycol)s, PEG 4000 and PEG 6000, under matrix-assisted laser desorption/ionization conditions was studied by using different concentration ratios of the sodium ion, as the reference ion, and another alkali metal ion (Li(+), K(+), Rb(+), Cs(+)). A linear correlation was found between the intensity ratio of the sodiated PEGs and PEGs cationized with alkali metal ions versus the initial concentration ratio of sodium and alkali metal ions. The slopes of these straight lines are proposed as a novel selectivity ratio for the ionization process. The intensity distribution of the cationized PEGs was also investigated. It was found that the cationized oligomers follow Poisson statistics. The M(n) and M(w) values were also evaluated. An explanation for the observed effects is given.     

生物检材中乌头类生物碱的检验

 用薄层 (TLC)、高效液相 光电二极管阵列检测器 (HPLC/DAD)、动物实验等方法对生物检材中乌头生物碱进行检验 ,并对这些方法进行比较。结果发现 ,TLC法为此类药物检验筛选的首选方法 ,最小检出量为 0 3μg。在进行HPLC检测时 ,以乌头生物碱的特征紫外吸收光谱和动物实验结果为重要的定性手段 ,其特征吸收波长为 (2 2 8± 2 )nm和 (2 75± 2 )nm。乌头生物碱在 2mg/L～ 5 0mg/L时其峰面积与质量浓度有很好的线性 ,相关系数为 0 9996。经实际案件证明 ,方法准确、灵敏 ,可用于生物检材中乌头类生物碱的检验。     

Design of experimental routes and data processing for the determination of the depth-distribution of energy in real solids

No adequate thermodynamic definition of non-equilibrated solids is available at present. In this paper a method is suggested for the energetic characterization of solids by estimation of the distribution of the differential molar internal energies — as they appear during the breakdown of sample e.g. by chemical reaction, i.e. the ‘depth distribution of differential energies’ (DDE) of samples. Thermodynamic considerations are presented for approximating this quantity — and experimental possibilities proposed to attain the needed input information by thermoanalytical methods. Application of the suggested procedure is supposed to contribute to the better understanding of structure — energy — reactivity relations in real solids.     

钒氧阴离子团簇与小分子碳氢化合物反应的实验和理论研究

为了在分子层次上揭示相关催化反应的机理, 人们对过渡金属氧化物团簇与碳氢化合物分子反应进行了大量研究. 相比于过渡金属氧化物团簇阳离子, 阴离子对一些碳氢化合物的活性弱得多, 因此研究还很少. 在本工作中, 我们通过激光溅射产生钒氧团簇阴离子VxOy, 产生的团簇在接近热碰撞条件下与烷烃(C2H6和C4H10)以及烯烃(C2H4和C3H6) 在一个快速流动反应管中进行反应, 飞行时间质谱用来检测反应前后的团簇分布. 在VxOy与烷烃的反应中, 生成了产物V2O6H-和V4O11H-; 在与烯烃的反应中, 产生了相应的吸附产物V4O11X-(X=C2H4或C3H6). 密度泛函理论计算表明: V2O-6和V4O-11可以活化烷烃(C2H6和C4H10)的C—H键, 也可以与烯烃(C2H4和C3H6)发生3+2环化加成反应形成一个五元环结构(-V-O-C-C-O-), C—H键活化与环加成反应都需经历可以克服的反应能垒. 理论计算与实验观测结果相符合. V2O-6和V4O-11团簇都具有氧原子自由基(O·或O-)的成键特征, 活性O-物种也经常出现在钒氧催化剂表面, 因而本研究在分子水平上, 揭示了表面活性氧物种与碳氢化合物反应的机理.