High‐molecular‐weight poly(1,2‐propylene succinate): A soft biobased polyester applicable as an effective modifier of poly(l‐Lactide)

Poly(1,2‐propylene succinate) (PPS) having high molecular weight can be synthesized by multi‐step melt‐polycondensation of succinic acid (SA) and 1,2‐propylene glycol (PG) with various catalysts. The first step is noncatalytic esterification/oligomerization of the two monomers, followed by the second step of catalytic melt‐polycondensation. In this step, co‐catalyst systems of Zn(AcO)₂/Ge(OBu)₄ and Zn(AcO)₂/Ti(BuO)₄ are effective for obtaining PPS having middle molecular weights (>10.0 kDa). This middle‐molecular‐weight PPS is chain‐elongated in the third‐step polycondensation with Zn(AcO)₂ as the catalyst to obtain a molecular weight reaching 120 kDa. As verified by ¹H‐ and ¹³C‐NMR spectra combined with two‐dimensional experiments, PPS has a ω‐bis‐hydroxy structure where the PG units leave the secondary hydroxyl terminals in larger ratio than the primary hydroxyl terminals. The PPS polymers are amorphous in nature, showing T_g around −4 °C. PPS can be solution‐ and melt‐blended with poly(l ‐lactide) (PLLA). By melt‐blending a high‐molecular‐weight PPS in an amount of 7.5–15 wt %, the modulus of the PLLA films decreases below 2000 MPa and the tear strength increases twice, supporting the effectiveness of PPS polymer in imparting flexible nature to PLLA. PPS polymers can therefore be applicable as elastomeric or flexible plastic modifiers having a 100 % biobased content. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1795–1805     

Kinetic study of low‐temperature imidization of poly(amic acid)s and preparation of colorless,transparent polyimide films

Conventional synthesis of polyimides includes high‐temperature (160–350 °C) imidization of poly(amic acid)s. In the present work, imidization has been carried out at much lower temperatures (40–160 °C). 1,2,4,5,‐cyclohexanetetracarboxylic dianhydride (HPMDA) or pyromellitic dianhydride (PMDA) was polymerized with an aromatic diamine, 4,4′‐diaminodiphenylmethane (DDPM), to give poly(amic acid)s, which were then imidized chemically. Imidization was more than 90% complete even at the very low imidization temperature of 40 °C. It was found that the imidization occurs in two steps: an initial rapid cyclization and a subsequent slower cyclization. The activation energy for the rapid process was determined to be 4.3 kJ/mol, and that of the slower process, 4.8 kJ/mol. As the imidization temperature decreases, the transmittance of the resulting polyimides tends to gradually increase, the cutoff wavelength decreases and the color becomes pale. A partially aliphatic polyimide based on HPMDA and DDPM prepared at 40 °C yielded thin films that were highly transparent and colorless, and had good flexibility, solubility and thermal stability. The polyimide films prepared in this study may be good candidates for flexible, transparent plastic substrates in the display industry. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1593–1602     

Preparation of Main-Chain Thermotropic Polyesters With Two Types of Mesogens Connected Alternatively by Aliphatic Spacers

A homologous series of main-chain thermotropic polyesters (PBTn, n = 2, 4, 6) containing biphenyl and triad aromatic ester mesogenic units interconnected by n-methylene spacers in the main chain were prepared from terephthaloyl bis(4-oxybenzoyl chloride) (TOBC) and 4,4′-bis(ω-hydroxyalkyloxy)biphenyls (n-BP, n = 2, 4, 6) by solution polycondensation. The chemical structures of the monomers and PBTn were characterized by spectroscopic techniques and elemental analysis. The solubility, supermolecular structures, thermal and liquid crystalline properties of PBTn were investigated by differential scanning calorimetry (DSC), polarizing microscopy (PLM), small-angle X-ray scattering (SAXS), thermogravimetric analyses (TGA), and wide-angle X-ray diffraction (WAXD), and they were found to be closely dependent on the length of the methylene spacers. The increasing methylene units led to improved solubility, broader liquid crystalline range, reduced mesophase-isotropic transition point, higher thermal stability, and decreasing crystallinity. The decomposition temperatures (5% mass loss) of the polymers were above 380°C in nitrogen atmosphere and only PBT4 and PBT6 exhibited smectic mesophases as well as high viscosity in the mesophase.     

Optical characterization of pristine poly(3‐hexyl thiophene) films

We describe a comprehensive model for the optical properties of pristine films of poly‐(3‐hexylthiophene) (P3HT). The presented model is anisotropic with the optical axis normal to the substrate plane, which is consistent with previous x‐ray diffraction studies that show preferential edge‐on packing of the polymer chains on the substrate. Peak locations and spacings are defined using a Huang‐Rhys vibronic progression consistent with known phonon energies. We demonstrate that the model fits variable‐angle spectroscopic ellipsometry and normal‐incidence transmission data well, and accurately predicts angle‐ and polarization‐dependent transmission and reflection data. The spectral features of the optical constants used in the model are in excellent agreement with published spectroscopic data on P3HT. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

中细柔性圆环壳整体弯曲的一般解及在波纹管计算中的应用(Ⅱ)——Ω型波纹管的计算

(Ⅱ)是(Ⅰ)的具体应用。计算了Ω型波纹管的角向刚度、横向刚度和应力分布,并将所得结果与有关的细环壳理论及实验进行了比较。结果表明,单独用(Ⅰ)的非齐次解能够计算Ω型波纹管的纯弯曲,而且比细环壳理论更接近实际;但在横向位移作用下,(Ⅰ)的非齐次解只能部分地满足边界条件,此时应同时考虑齐次解的作用,即完整的一般解(Ⅰ)才能满足所有的要求.     

高速机构动力学研究进展

高速机械动力学及其控制是机构学研究领域的一个前沿性学科,与其内容相关者涉及多个新兴学科领域.本文首先概述了高速机构动力学基础------柔性多体动力学建模理论及周期时变机械系统动力行为研究的现状及其进展状况.其次,对机械工程中常见的典型高速机构,特别是对高速连杆、凸轮机构动力学的研究现状进行了分门别类的介绍.再次,对带间隙机构动力学的研究给予了一定的关注.相应地,对柔性机构振动主动控制的研究状况也进行了简要介绍.最后,指出上述研究领域内一些值得研究的问题.