Synthesis and structural, spectroscopic and magnetic studies of two new polymorphs of Mn(SeO3)·H2O

Two new manganese(II) selenite polymorphs with formula Mn(SeO₃)·H₂O have been synthesized by slow evaporation from an aqueous solution. The crystal structure of both compounds (1) and (2) have been solved from X-ray diffraction data. The structure of (1) was determined from single-crystal X-ray diffraction techniques. The compound crystallizes in the Ama2 space group, with a=5.817(1), b=13.449(3), and Z=4. The structure of (2) has been solved from X-ray powder diffraction data. This phase crystallizes in the P2₁/n space group with unit-cell parameters of a=4.921(3), b=13.121(7), , β=90.03(2)° and Z=4. Both polymorphs exhibit a layered structure formed by isolated sheets of MnO₆ octahedra and (SeO₃)²⁻ trigonal pyramids in the (010) plane. These layers, which contain one manganese and selenium atom crystallographically independent, are formed by octahedra linked between them through the selenite oxoanions. The difference of both compounds consists in the stacking of the layers along the b-axis. The IR spectra show the characteristic bands of the selenite anion. Studies of luminescence performed at 6 K and diffuse reflectance spectroscopy have been carried out for both phases. The Dq and Racah (B and C) parameters, from luminescence and diffuse reflectance spectroscopy, are Dq=705, B=750, for (1) and Dq=720, B=745, for (2). The ESR spectra of both compounds are isotropic with g-values of 1.99(1). Magnetic measurements indicate the presence of antiferromagnetic couplings in both phases. The J-exchange parameters have been estimated by fitting the experimental magnetic data to a model for square-planar lattice. The values obtained are J/k=-0.83, −0.91 K and J^′/k=-0.97, −1.20 K, for polymorphs (1) and (2), respectively.     

Visible Up-Conversion Luminescence in Ho3+: BaTiO3 Nano-Crystals Prepared by Sol Gel Technique

Visible up-conversion emissions at (435, 545, 580, 675 and 690 nm) and (437, 547 575 and 675 nm) have been observed from the sol-gel derived nano-crystalline Ho³⁺: BaTiO₃ powders and thin films respectively, under 808 nm laser diode excitation emissions. Combined with the energy level structure of Ho³⁺ ions and the kinetics of the visible emissions, the up-conversion mechanism has been analyzed and explained. The blue, green and red emissions of both samples has been attributed to the ground state-directed transition from (⁵F₁), (⁵S₂) and (⁵F₅), which are populated through excited state absorption (ESA) for 808 nm excitation. Nano-structure pure barium titanate and doped with different concentrations of Ho³⁺ ions in the from of powder and thin film have been prepared by sol-gel technique, using barium acetate (Ba(Ac)₂), and titanium butoxide (Ti(C₄H₉O)₄), as precursors. The thin films were prepared by sol-gel spin coating method. The as-grown thin films and powders were found to be amorphous, which crystallized to the tetragonal phase after heating at 750°C in air for 30 minutes. The crystallite sizes of the thin film and powder both doped with 4% Ho³⁺ ions was found to be equal to 11 and 16 nm, respectvely.     

Growth and Characterization of Crystal Nd_(0.06)Y_(0.94)Sr_6Sc(BO_3)_6

<正>The crystal of Nd0.06Y0.94Sr6Sc(BO3)6 with the dimensions up to 35 mm × 28 mm × 13 mm was grown by a top-seeded solution growth method from Li6B4O9 flux. The grown crystal was characterized by X-ray powder diffraction. The optical absorption of the crystal shows that it has a strong absorption band at 8070 A, and the absorption coefficient is 2.17cm-1 with a FWHM of 41 A, which can match with the wavelength of the diode-laser (LD) and is suitable for the LD pumping. Based on the Judd-Ofelt theory, the three parameters of line oscillator strength Ω(λ) (λ = 2, 4 and 6) of the Nd3+ion in the crystal were calculated as follows: Ω2= 1.194 × 10-20, Ω4= 4.186 × 10-20 and Ω6 = 3.351 × 10-20cm2, which are relatively larger. The results indicate that the crystal Nd0.06Y0.94Sr6Sc(BO3)6 may be a kind of high-efficient laser material for diode-pumped.     

Synthesis and characterization of metal polycarboxylates constructed from lanthanides(iii) and 1,2,4,5-benzenetetracarboxylic acid

The complexes of yttrium(III) and lanthanides(III) with 1,2,4,5-benzenetetracarboxylic acid were prepared as crystalline solids of the general formula Ln₄(C₁₀H₂O₈)₃⋅14H₂O. They are insoluble in water. On heating in air or inert gas atmosphere all compounds lose water molecules; next anhydrous compounds decompose to oxides. The yttrium complex and heavy lanthanide (from Ho to Lu) ones crystallize in monoclinic crystal system. The dehydration does not change the crystal structure of the compounds.     

醇盐法制备稀土化合物超微粉末

稀土元素具有广泛的用途,在大多数的应用中其效果都与原料的纯度、粒度、粒经分布范围等因素有关。由于超微粉末的比表面积大、化学活性高,因此可以预料,若将稀土化合物制成超微粉末,会使它的催化性能及在各种材料中的性能有明显的改变,也可使稀土有新的、更高的应用价值。     

Ab initio structure determination of new compound Ba3(BO3)(PO4)

The crystal structure of new compound Ba₃BPO₇ was determined by ab initio method from high-resolution conventional X-ray powder diffraction data. The Rietveld refinement converged to R_p=5.92%, R_wp=8.87%, R_exp=5.00% with the following details: Hexagonal, space group P6₃mc, a=5.4898 (1) Å, c=14.7551(1) Å, Z=2. The basic unit of the structure is the [BaO₁₀]-[BO₃]-[PO₄] polar polyhedra-chain composed of Ba1-B-P-O cluster. These chains, running along c-axis, stack in a HCP mode to build the whole structure with triangular prism channels. The channels are parallel to c-axis too, in which Ba2 and Ba3 are located.     

抗癌药物的电化学研究(Ⅱ)道诺霉素在DNA修饰石墨粉末微电极上的电化学行为及分析应用

研究了道诺霉素 ( DNM)在石墨粉末微电极和 DNA修饰石墨粉末微电极上的电化学行为 ,并分析了产生差别的原因。在此基础上 ,提出了测定微量 DNM的方法 ,DNM浓度在 1 .0× 1 0 - 7～ 1 .0× 1 0 - 5mol/L之间其微分脉冲伏安 ( DPV)峰电流与浓度有良好的线性关系 ,检出限为 5 .0× 1 0 - 8mol/L。采用标准加入法测定了模拟样品中的 DNM,回收率在 94%～ 1 0 8%之间 ,结果令人满意     

Conductometric study of cationic and anionic complexes in propylene carbonate

Conductivity data are used to determine thermodynamic complex formation constants for cases in which both the initial electrolyte and the complexed electrolyte form ion pairs. Using the method described in the text, the complex formation constants of Li⁺, Na⁺ and K⁺ with the crown ether 18-crown-6 and of Li⁺ with the ligand triphenylphosphine oxide in propylene carbonate have been evaluated from conductance data. The complexation of AgBr in propylene carbonate solutions of n-etrabutylammonium bromide has also been studied by the measurement of molar conductivities. The results of these studies indicate that ion pairing should not be neglected, even in high permittivity solvents such as propylene carbonate, and that the ion pair association constants correlate well with structural studies on cation-crown ether molecular conformations.     

触头用银合金粉末的氧化性能和氧化后的组织结构

通过热重实验和扫描电子显微等方法，研究了４种触头用银合金粉末的氧化性能及氧化后的组织结构。发现Ａｇ－Ｓｎ－ＲＥ合金粉末氧化以后，在粉末表层形成一层纯银层，其组织结构理想；它的氧化性能最好，适于制备触头材料。Ａｇ－Ｓｎ－ＲＥ合金粉末的优良氧化性能与其氧化后理想的组织结构有关。稀土元素可以降低合金粉末的氧化温度，其它影响作用有待于进一步研究。     

包覆Y(OH)3的球形Ni(OH)2的电化学性能

利用软嵌式粉末电极技术研究了Y(OH)3包覆对球形Ni(OH)2电化学性能的影响. 循环伏安结果表明, 在球形Ni(OH)2的氧化过程中存在Ni(Ⅲ)和Ni(Ⅳ)的两步氧化反应, 产生的Ni(Ⅳ)不稳定, 能分解产生NiOOH和氧气, 所以可将Ni(Ⅲ)→Ni(Ⅳ)看作副反应. Y(OH)3包覆层对Ni(OH)2氧化过程后期的副反应, 特别是Ni(Ⅲ)→Ni(Ⅳ)具有较好的抑制作用. 由包覆后的Ni(OH)2制成的模拟电池表现出很好的高温性能, 在1C充放电条件下, 当Y的摩尔分数为1.61%时, 在60 ℃时所对应的容量保持率可达到25 ℃的92.7％; 当Y的摩尔分数仅为0.55 %时, 在60 ℃时所对应的质量比容量也可达到241.3 mA·h/g.