超高真空中银表面垂直谐波电流的实验测量

在超高真空的条件下,测量了清洁、自由银表面产生的光学二次谐波随基波电矢量与入射面之间夹角(?)的变化,从而通过理论公式,求得由Rudnick和Stern引入的,用于衡量垂直面电流密度的唯象参数a的值,在入射基频光波长为1.064μm时,被测定为-4.0±0.8.     

K2NiF4型结构的A2－xSrxBO4(A＝La, Dy, B＝Mn, Fe, Co, Ni)希土复合氧化物的合成

以典型的轻希土镧和重希土镝及碱土金属锶作为Ａ位离子，以过渡金属锰、铁、钴、镍作为Ｂ位离子，合成了Ｋ２ＮｉＦ４型结构的Ａ２－ｘＳｒｘＢＯ４希土复合氧化物，采用粉末Ｘ射线衍射技术考察了反应条件等因素对生成Ｋ２ＮｉＦ４型四方（Ｔ）结构上析影响，实现结果表明，四方结构的形成不仅与几何因素有关，而且与各组分的物理化学性质有关。各个不同的组成，生成四方相的温度范围也有所不同。适当地提高反应温度以及延长灼烧时间     

纳米二氧化锆制备过程的DSC、TGA和XRD研究

用ＤＳＣ、ＴＧＡ和ＸＲＤ技术研究了在沉淀法制备纳米ＺｒＯ２的过程中，残留ＮＨ４Ｃｌ、ｐＨ值、滴加方式、以及结构稳定剂Ｙ２Ｏ３的添加量对结晶过程的影响。结果表明，残留ＮＨ４Ｃｌ使结晶化温度降低，使放热过程变为吸热过程。而ｐＨ值、滴加方式和结构稳定剂的添加对结晶过程无明显影响。     

乳化法—火焰原子吸收光谱法测定奶粉中的锌

用乳化剂ＯＰ将奶粉乳化成稳定的乳浊液，喷入空气－乙炔火焰中，以标准加入法测定锌，测定结果与灰化法一致，方法简便，准确。     

不同沉淀剂制备的Ag／TS－1催化丙烯直接气相氧化合成环氧丙烷

 在423K、常压固定床石英反应器中，以丙烯直接气相氧化为探针反应，考察了催化剂制备方法、沉淀剂的种类和浓度对制备的Ag／TS－1催化剂催化性能的影响，采用TEM，XRD和UV－Vis等表征手段对Ag／TS－1催化剂进行了分析．结果表明，沉积－沉淀法是最佳的催化剂制备方法，但浸渍法也可制得具有环氧丙烷选择性的催化剂．K2CO3是一种良好的沉淀剂．以K2CO3为沉淀剂，硅钛比为64的TS－1为载体制备的Ag／TS－1催化剂上的丙烯转化率为1．72％，环氧丙烷选择性为98．2％．少量单质银的存在有利于环氧丙烷的生成，除银粒子的分散状态外，银粒子与载体TS－1间的相互作用对提高催化剂的选择性具有决定性作用．     

Preparation of Nanoelectrode Ensembles by Assembly of Nano—Silver Colloid on Gold Surface

A novel method for preparing silver nanoelectrode ensembles(SNEEs) and gold nanoelectrode ensembles (GNEEs) has been developed. Silver colloid particles were first absorbed to the gold electrode surface to form a monolayer silver colloid. N-hexadecyl nercaptan was then assembled on the electrode to form a thoil monolayer on which hydrophilic ions cannot be transfered. The SNEEs was prepared by removing thiol from silver colloid surface through applying and AC voltage with increasing frequency at 0.20V(vs.SCE). Finally,GNEEs was obtained by immersing a SNEEs into 6 mol/L HNO3 to remove the silver colloid particles. By comparison with other methods such as template method ect., this method enjoys some advantages of lower resistance, same diameter,easy preparation,controllable size and density.     

8-羟基喹啉-5-磺酸纤维微柱分离富集电感耦合等离子体原子发射光谱法同时测定多种痕量元素

本文合成了8-羟基喹啉-5-磺酸纤维滤纸片,以此做为微柱填充物同时富集了10种痕量元素,并分离了样品中的高盐组分.本方法可使痕量组分的分离与富集同步进行,因而特别适用于原子光谱测定前样品的预处理.     

Influence of Temperature and Time on the Stability of Silver in Silica Sol-Gel Glasses

The darkening of silica sol-gel glasses doped with 0.05 mol% silver was studied. Six sols were prepared from TEOS and silver nitrate. Different additives were used, to influence the chemical and physical states of silver: oxidizing or reducing agents (H₂O₂, As₂O₅), colloid stabilizer (sodium citrate) and network modifiers (Li₂O, CaO). Sols were gelified at 60°C and densified at 600°C. The samples without additives and those prepared with H₂O₂ at room temperature even if they were protected from light. With increased temperature, the darkening became samples were heated above, 400°C, reversible bleaching took place. This darkening-bleaching is of thermal nature (“thermochromic effect”) and seems to be determined by a reversible aggregation-disaggregation of tiny silver particles. The presence of sodium citrate, as an additive delayed the darkening effect and the presence of CaO delayed it even further. Lithium oxide inhibited it totally.     

Photochemical Synthesis and Spectral-Optical Characteristics of ZnO/Cu and ZnO/Ag/Cu Nanoheterostructures

The photoreduction of Cu²⁺ at the surface of ZnO nanoparticles and ZnO/Ag nanostructures was investigated. The spectral characteristics of the obtained ZnO/Cu and ZnO/Ag/Cu composites were studied in relation to the reaction conditions. It was shown that the ZnO/Ag nanoparticles have higher photocatalytic activity in the reduction of Cu²⁺ ions than the individual ZnO particles.