W‐band physical layer design issues in the context of the DAVID–DCE experiment

This paper aims at focusing on the aspects concerning the physical layer design for an innovative satellite communication experiment. Such an experiment, denoted by the acronym DAVID–DCE (Data and Video Interactive Distribution—Data Collection Experiment) is based on the exploitation of the W‐band (75–110 GHz) for high‐bit‐rate satellite transmission. The potential advantages of using of the W‐band are mainly related to the great bandwidth availability, and to the absence of interference. Moreover, an expected result of the experiment is a substantive improvement in the communication system's performances in the presence of meteorological phenomena (e.g. rain) as compared with the more conventional Ka‐band satellite transmission. On the other hand, problems to be faced concern the non‐ideal behaviours of hardware devices employed for high‐frequency digital transmission. In particular, carrier recovery and timing recovery are the most crucial signal‐processing tasks to be carefully considered in the design of the physical level of the system, because they considerably suffer from hardware impairments. The purpose of this work is to illustrate the proposed solutions in terms of the most critical modulation, demodulation and synchronization design issues, together with the effects of non‐ideal behaviours of hardware components on BER performances. Copyright © 2004 John Wiley & Sons, Ltd.     

Internal standardization for the determination of cadmium,cobalt, chromium and manganese in saline produced water from petroleum industry by inductively coupled plasma optical emission spectrometry after cloud point extraction

In the present paper a procedure is proposed for the determination of traces of Cd, Co, Mn and Cr in petroleum industry produced water by inductively coupled plasma optical emission spectrometry. The procedure is based on cloud point extraction of these metals, as their dithizonate complexes, into the surfactant-rich phase of octylphenoxypolyethoxyethanol surfactant (Triton X-114). Extractions were carried out in solutions with salinities between 10‰ and 70‰. Since residual salinity in the surfactant-rich phase caused differences in its transport to the plasma, yttrium was used as an internal standard to correct for this effect. The simultaneous metal extraction procedure was optimized by response surface methodology using a Doehlert design and desirability function. Enhancement factors of 21, 21, 9 and 19, along with limits of quantification of 0.093, 0.20, 0.73 and 1.2 μg L^− 1, and precision expressed as relative standard deviation (n = 8, 20.0 μg L^− 1) of 5.8, 1.2, 1.7 and 5.7% were obtained for Cd, Co, Mn and Cr, respectively. The accuracy was evaluated by spike recovery tests on the high salinity water samples with salinity of 40 and 63‰.     

彩色多频同步显示器行激励级电路的倒推设计法（1）

行激励级电路的设计是完全为行输出级服务的,它实质上是行输出级电路设计的一个重要而不可分割的组成部分。因此行激励级电路的设计,自然采用了从显象管偏转线圈和行输出管到激励变压器和行激励级的倒推设计法。     

Pseudoaffinity, de Boor algorithm, and blossoms

In order to ensure existence of a de Boor algorithm (hence of a B-spline basis) in a given spline space with (n+1)-dimensional sections, it is important to be able to generate each spline by restriction to the diagonal of a symmetric function of n variables supposed to be pseudoaffine w.r. to each variable. We proved that a way to obtain these three properties (symmetry, n-pseudoaffinity, diagonal property) is to suppose the existence of blossoms on the set of admissible n-tuples, given that blossoms are defined in a geometric way by means of intersections of osculating flats. In the present paper, we examine the converse: do symmetry, n-pseudoaffinity, and diagonal property imply existence of blossoms?     

四种多变量校准方法在FTIR多组分分析中的性能比较

本文对四种多变量校准方法－－经典最小二乘法（CLS），偏最小二乘法（PLS），卡尔曼滤波法（KFM）以及人工神经网络法（ANN）－－在多组分浓度分析方面的性能进行了比较。选择五种红外谱图严重混叠的大气有机毒物－－1，3－丁二烯，苯，邻二甲苯，氯苯和丙烯醛－－作为分析对象。分别计算各种方法对该5组分体系的平均预测误差MPE和平均相对误差MRE进行比较。结果表明，偏最小二乘法在处理这类问题中是最稳健的方法。     

初论带状光纤缆结构设计

推导出了成叠带状光纤在松套管中余长的两个计算公式，此两公式是带状光纤缆结构设计需要用到的基本公式。此外，还对带状光纤缆结构设计作了初步讨论。     

A notch filter for 140 GHz microwave radiation

The construction of a notch-filter for 140 GHz with very low passband insertion loss is described. It is based on a single-mode rectangular waveguide and cylindrical cavities matched to it. The typical transmission characteristic is also presented.     

上下行信号平衡与蜂窝小区设计

本文从无线电通信基本要素出发 ,阐述上行信号和下行信号的无线传播 ,得出上下行信号平衡链路方程 ,并以我国普遍使用的TACS系统和GSM系统为例 ,着重讨论了信号平衡与蜂窝小区设计之间的关系。     

Probabilistic linear models for multiresolution estimation in gray-level images

A multiresolution analysis of digital gray-level images is presented. A gray-level multi-scale framework is determined from two main assumptions: the gray scale is binary at the finest spatial resolution, and the gray levels of composed regions are obtained additively. In order to interrelate the gray-level histograms of the same image at different resolutions, probabilistic linear models are developed, which are then applied for estimation. Linear-optimization theory is used as a way of constructing such models. A general procedure for image processing is sketched, based on gray-level estimation. A versatile algorithm for nonlinear filtering is derived. Some examples of prospective applications are given.This work was partially supported by grant TIC91-646 from the DGYCIT of the Spanish Government.     

Partial scan design and test sequence generation based on reduced scan shift method

This paper presents a partial scan algorithm, calledPARES (PartialscanAlgorithm based onREduced Scan shift), for designing partial scan circuits. PARES is based on the reduced scan shift that has been previously proposed for generating short test sequences for full scan circuits. In the reduced scan shift method, one determines proch FFs must be controlled and observed for each test vector. According to the results of similar analysis, PARES selects these FFs that must be controlled or observed for a large number of test vectors, as scanned FFs. Short test sequences are generated by reducing scan shift operations using a static test compaction method. To minimize the loss of fault coverage, the order of test vectors is so determined that the unscanned FFs are in the state required by the next test vector. If there are any faults undetected yet by a test sequence derived from the test vectors, then PARES uses a sequential circuit test generator to detect the faults. Experimental results for ISCAS'89 benchmark circuits are given to demonstrate the effectiveness of PARES.