带有前置EDFA卫星相干激光通信终端的信噪比分析

卫星激光通信链路是一项实现卫星大规模星座组网的关键技术。相干激光链路灵敏度高、抗背景干扰、速率升级空间大,在星间激光链路中应用广泛。文章建立了带有前置掺铒光纤放大器(EDFA)的卫星相干激光通信终端的信噪比分析模型,仿真分析了EDFA功率增益、EDFA噪声系数、本振光功率、信号光功率、光放后端光带宽、基带前端电带宽对终端输出信噪比的影响以及各种输出噪声功率占比的情况,得到了带有前置EDFA卫星相干激光通信终端的信噪比参数特性。     

基于直线运动机构的大变倍比红外变焦成像系统

针对同时兼顾大范围搜索和精确识别目标的迫切需求,研制了一种大变倍比红外变焦成像系统,设计两片独立运动的变倍镜及一片补偿镜,通过两个变倍镜级联的方式获得大变倍比。结合系统运动镜片多及变焦曲线复杂的特点,采用直线运动机构实现镜片变焦运动,使用集成编码器及螺纹丝杆的直线电机作为驱动。通过有限元仿真开展了系统力学分析,所设计镜片最大位移为3.04×10^-3 mm。成像系统适用于中波红外制冷式640×512焦平面阵列探测器,变倍比达到55倍。实验室成像及外场实景成像的结果表明,系统在焦距由6 mm至330 mm连续变化的过程中成像清晰、像质良好,验证了系统的连续变焦成像性能,该设计合理可靠。研究成果在搜索、跟踪、侦察、监视等方面有广阔的应用前景。     

Skin-like Omnidirectional Stretchable Platform with Negative Poisson's Ratio for Wearable Strain–Pressure Simultaneous Sensor

Conventional elastomeric polymers used as substrates for wearable platforms have large positive Poisson's ratios (≈0.5) that cause a deformation mismatch with human skin that is multidirectionally elongated under bending of joints. This causes practical problems in elastomer-based wearable devices, such as delamination and detachment, leading to poorly reliable functionality. To overcome this issue, auxetic-structured mechanical reinforcement with glass fibers is applied to the elastomeric film, resulting in a negative Poisson's ratio (NPR), which is a skin-like stretchable substrate (SLSS). Several parameters for determining the materials and geometrical dimensions of the auxetic-structured reinforcing fillers are considered to maximize the NPR. Based on numerical simulation and digital image correlation analysis, the deformation tendencies and strain distribution of the SLSS are investigated and compared with those of the pristine elastomeric substrate. Owing to the strain-localization characteristics, an independent strain-pressure sensing system is fabricated using SLSS with a Ag-based elastomeric ink and a carbon nanotube-based force-sensitive resistor. Finally, it is demonstrated that the SLSS-based sensor platform can be applied as a wearable device to monitor the physical burden on the wrist in real time.     

Wideband reflecting frequency-selective surface polarizer for X-band applications

This paper proposed the design of a broadband linear-to-circular reflecting polarizer for X-band applications. The polarizer is designed with three-arm dipole-shaped unit cells with a full ground plane to get wideband performance. The incident linear polarized wave is converted to a right-handed circularly polarized wave upon reflection from the polarizer. The footprint of the unit cell is 9 × 9 mm, which is printed on a FR-4 substrate. Fabricated prototype is measured for its performances like polarization conversion ratio (PCR), fractional bandwidth, and aperture efficiency. The PCR is about 97%, and the fractional bandwidth is 64% with the aperture efficiency of more than 80%. Polarizer performance is analyzed in transverse electric and transverse magnetic modes, and they are stable up to 40° of various incident angles. The polarizer exhibits the 3-dB axial ratio bandwidth from 8 to 12 GHz, which is suitable for satellite applications.     

Research on encoding and decoding of non-binary polar codes over GF(2m)

Binary Polar Codes (BPCs) have advantages of high-efficiency and capacity-achieving but suffer from large latency due to the Successive-Cancellation List (SCL) decoding. Non-Binary Polar Codes (NBPCs) have been investigated to obtain the performance gains and reduce latency under the implementation of parallel architectures for multi-bit decoding. However, most of the existing works only focus on the Reed-Solomon matrix-based NBPCs and the probability domain-based non-binary polar decoding, which lack flexible structure and have a large computation amount in the decoding process, while little attention has been paid to general non-binary kernel-based NBPCs and Log-Likelihood Ratio (LLR) based decoding methods. In this paper, we consider a scheme of NBPCs with a general structure over GF(2^m). Specifically, we pursue a detailed Monte-Carlo simulation implementation to determine the construction for proposed NBPCs. For non-binary polar decoding, an SCL decoding based on LLRs is proposed for NBPCs, which can be implemented with non-binary kernels of arbitrary size. Moreover, we propose a Perfect Polarization-Based SCL (PPB-SCL) algorithm based on LLRs to reduce decoding complexity by deriving a new update function of path metric for NBPCs and eliminating the path splitting process at perfect polarized (i.e., highly reliable) positions. Simulation results show that the bit error rate of the proposed NBPCs significantly outperforms that of BPCs. In addition, the proposed PPB-SCL decoding obtains about a 40% complexity reduction of SCL decoding for NBPCs.     

一种具有不同功分比的同相平衡至单端式功分器北大核心CSCD

提出了一种具有同相输出和不同功分比的平衡至单端式功分器。该功分器由±90°和180°传输线以及一个电阻构成,能够实现对差模信号的不同功率分配。其电路参数通过S参数的约束条件进行求解。为了减少尺寸并增大最大功分比至11.6∶1,提出了两种耦合结构来实现-90°传输线结构。最终设计了功分比为1∶1和7∶1的两种原型,最小插入损耗为0.3~0.4 dB,并与现有设计进行了比较。实测工作带宽(S_(ddAA)<-20 dB)分别为14.3%和11.1%。在工作频带内,隔离和共模抑制均高于20 dB,两个输出端口之间的相位差为0°±5°。因此,所提出的具有不同功分比的设计具有尺寸小、共模抑制、易于同时与平衡和单端电路集成等优点。     

Chapter 15 DEA/AR analysis of the 1988–1989 performance of the Nanjing textiles corporation

This article employs new data envelopment analysis/assurance region (DEA/AR) methods to evaluate the efficiency of the 35 textile factories of the Nanjing Textiles Corporation (NTC), Nanjing, China. The returns to scale (RTS) of these factories were studied without assuming that the optimal DEA solutions were unique. All DMUs are identified with pointsE (Extreme Efficient),E (Efficient but not an extreme point) andF (Frontier but not efficient). We then further identify the nonfrontier DMUs with pointsNE, NE andNF according to whether they are projected onto a point inE, E, orF en route to evaluating their performances. All of the inefficient factories were in classNF and had unique optimal primal-dual solution pairs. Consequently, the solution pairs satisfy the strong complementary slackness condition (SCSC). Application of cone-ratio (CR) ARs reduced significantly the number of factories in classE, and showed that some AR-efficient factories were more flexible in adopting the mixture of central planning and market economies that China currently is trying to use. Also, linked-cone (LC) ARs were applied to measure maximum and minimum profit ratios. The SCSC multiplier space approach was utilized to analyze the sensitivity of the efficiency results to potential errors in the data with and without ARs. The results in this article suggest that collective units had a better performance than state-owned units in the two consecutive years analyzed.This paper was written while the author was at the School of Economics and Management, Southeast University, Nanjing 210018, P.R. China.     

Stoichiometric ratio and doping effects on the thermal properties of sodium potassium sulphate crystals

The influence of stoichiometric ratio on the phase transition of sodium potassium sulphate (Na_xK_1–x)₂SO₄ crystals is investigated in the temperature range 300–500 K. The stoichiometric ratiox is chosen to bex=0.2, 0.3, 0.4, 0.8 and 0.9. The study has been carried out by using differential scanning calorimetry, DSC technique. The value of the specific heat,C _p, at the transition temperature,T _c , increases asx is increased up tox=0.4 and then decreases for higher values ofx. The change in the specific heat, C _p, is following a relation of the form C _p C _p (T–T _c /T _c )^– with = 0.12 which is in a fair agreement with the 3d Ising model. Insertion of Cu²⁺ ions into the lattice of (Na_xK_1–x)₂SO₄ crystals leads to a multiple peak in the temperature dependence ofC _p. The results are discussed from thermodynamical point of view.We would like to thank Prof. E. F. El-Wahidy, Prof. of Solid State Physics and Head of Physics Department, Faculty of Science, Alexandria University, for his interest and support of this work.     

Reactivity and characterisation of various rank turkish bituminous coal chars

A set of seven bituminous coal chars has been characterised by IR spectroscopy (FTIR), thermogravimetry (TG) and elemental analysis. FTIR study provided suitable information to establish differences between coal samples according to their chemical compositions. The reactivity of these samples was also studied and correlated with the coal parameters of mean vitrinite reflectance, fuel ratio and H/C ratio. The data suggest that reactivity as determined can be correlated with the mean vitrinite reflectance, fuel ratio and H/C ratio (0.90). The order of reactivity of samples were; Amasra (S1) (R _m= 0.65)>Azdavay (S4) (R _m=0.99)»Armutcuk (S2) (R _m=0.81)»Acenta (S3) (R _m=0.92)>Ac2l2k (S6) (R _m=1.11) Cay (S5) (R _m=1.03)>Sogutozu (S7) (R _m=2.14).